summaryrefslogtreecommitdiff
path: root/man
AgeCommit message (Collapse)Author
2013-07-02man: improve grammar and word formatting in numerous man pagesJason St. John
Use proper grammar, word usage, adjective hyphenation, commas, capitalization, spelling, etc. To improve readability, some run-on sentences or sentence fragments were revised. [zj: remove the space from 'file name', 'host name', and 'time zone'.]
2013-06-29man: fix spacing issue in various man pagesJason St. John
Before: libsystemd-daemonpkg-config(1) After: libsystemd-daemon pkg-config(1) This fix is more complicated than it should be due to the consecutive XML elements separated by collapsible whitespace. Merging the lines and separating the XML elements with an en space or a non-breaking space is the only solution that results in one, and only one, space being inserted between them when testing. An em space results in two spaces being inserted.
2013-06-26man: use <constant> for various constants which look ugly with quotesZbigniew Jędrzejewski-Szmek
2013-06-26man: always supply quotes around literalsZbigniew Jędrzejewski-Szmek
When manpages are displayed on a terminal, <literal>s are indistinguishable from surrounding text. Add quotes everywhere, remove duplicate quotes, and tweak a few lists for consistent formatting. https://bugzilla.redhat.com/show_bug.cgi?id=874631
2013-06-25man: Small language improvements to sd_journal_openDavid King
2013-06-24journald: fix space limits reportingZbigniew Jędrzejewski-Szmek
Reporting of the free space was bogus, since the remaining space was compared with the maximum allowed, instead of the current use being compared with the maximum allowed. Simplify and fix by reporting limits directly at the point where they are calculated. Also, assign a UUID to the message.
2013-06-22journal-verify: allow unlinked data entriesZbigniew Jędrzejewski-Szmek
Sometimes an entry is not successfully written, and we end up with data items which are "unlinked", not connected to, and not used by any entry. This will usually happen when we write to write a core dump, and the initial small data fields are written successfully, but the huge COREDUMP= field is not written. This situation is hard to avoid, but the results are mostly harmless. Thus only warn about unused data items. Also, be more verbose about why journal files failed verification. This should help diagnose journal failure modes without resorting to a hexadecimal editor. https://bugs.freedesktop.org/show_bug.cgi?id=65235 (esp. see system.journal attached to the bug report).
2013-06-22man: Fix small typoMichael Biebl
2013-06-20man: fix example for DefaultEnvironment=Lennart Poettering
The example mentioned Environment= rather than DefaultEnvironment=. Also made some other clean-ups.
2013-06-20man: document that shutdown() is only sometimes OK on sockets passed in via ↵Lennart Poettering
socket activation
2013-06-20manager: add DefaultEnvironment optionUmut Tezduyar
This complements existing functionality of setting variables through 'systemctl set-environment', the kernel command line, and through normal environment variables for systemd in session mode.
2013-06-19Describe handling of an AF_UNIX socketŁukasz Stelmach
Describe how to handle an AF_UNIX socket, with Accept set to false, received from systemd, upon exit. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
2013-06-18journal: add references to SSKG paper FSS is based onLennart Poettering
2013-06-17journalctl,loginctl,systemctl,systemd-cgls: add -l as alias for --fullDaniel Albers
https://bugs.freedesktop.org/show_bug.cgi?id=65850
2013-06-14man: update systemd-analyze invocationZbigniew Jędrzejewski-Szmek
2013-06-14man: improve readability of "_TRANSPORT=" section in systemd.journal-fields(7)Jason St. John
The list and descriptions of valid transports was difficult to read, so break the long sentence up into discrete man page list items to improve readability.
2013-06-13man: add sd_j_open_files to return values sectionZbigniew Jędrzejewski-Szmek
2013-06-10man: add note that sd_journal_open_files is racyZbigniew Jędrzejewski-Szmek
2013-06-10journalctl: allow the user to specify the file(s) to useZbigniew Jędrzejewski-Szmek
This is useful for debugging and feels pretty natural. For example answering the question "is this big .journal file worth keeping?" is made easier.
2013-06-10journal: add sd_journal_open_filesZbigniew Jędrzejewski-Szmek
This allows the caller to explicitly specify which journal files should be opened. The same functionality could be achieved before by creating a directory and playing around with symlinks. It is useful to debug stuff and explore the journal, and has been requested before. Waiting is supported, the journal will notice modifications on the files supplied when opening the journal, but will not add any new files.
2013-06-10journalctl: add --system/--user flagsZbigniew Jędrzejewski-Szmek
--user basically gives messages from your own systemd --user services. --system basically gives messages from PID 1, kernel, and --system services. Those two options are not exahustive, because a priviledged user might be able to see messages from other users, and they will not be shown with either or both of those flags.
2013-06-10journal: add ability to filter by current userZbigniew Jędrzejewski-Szmek
This is the just the library part. SD_JOURNAL_CURRENT_USER flags is added to sd_j_open(), to open files from current user. SD_JOURNAL_SYSTEM_ONLY is renamed to SD_JOURNAL_SYSTEM, and changed to mean to (also) open system files. This way various flags can be combined, which gives them nicer semantics, especially if other ones are added later. Backwards compatibility is kept, because SD_JOURNAL_SYSTEM_ONLY is equivalent to SD_JOURNAL_SYSTEM if used alone, and before there we no other flags.
2013-06-04man: mention that units are 1024-basedZbigniew Jędrzejewski-Szmek
2013-05-30systemctl: add command set-log-levelVáclav Pavlín
Command changes current log level
2013-05-30systemctl: add commands set-default and get-defaultVáclav Pavlín
systemctl set-default NAME links the default.target to the given unit, get-default prints out the path to the currently set default target.
2013-05-30core: read "debug" from kernel commandline and set log levelLukas Nykryn
2013-05-30man: link to XKB conf. guide in localectl(1)Zbigniew Jędrzejewski-Szmek
2013-05-22man: mention net.ifnames in kernel-command-line(3)Zbigniew Jędrzejewski-Szmek
2013-05-21man: Document missing optionsJan Janssen
2013-05-18Standardize on 'file system' and 'namespace' in man pages.David Strauss
This change is based on existing usage in systemd and online. 'File-system' may make sense in adjectival form, but man pages seem to prefer 'file system' even in those situations.
2013-05-16systemd-delta: add support for drop-in snippetsLukas Nykryn
2013-05-16utmp: turn systemd-update-utmp-shutdown.service into a normal runtime serviceLennart Poettering
With this change systemd-update-utmp-shutdown.service is replaced by systemd-update-utmp.service which is started at boot and stays around until shutdown. This allows us to properly order the unit against both /var/log and auditd. https://bugzilla.redhat.com/show_bug.cgi?id=853104 https://bugs.freedesktop.org/show_bug.cgi?id=64365
2013-05-15units: rework systemd-random-seed-{load,save}.service to be a single serviceLennart Poettering
That way ordering it with MountsRequiredFor= works properly, as this no longer results in mount units start requests to be added to the shutdown transaction that conflict with stop requests for the same unit.
2013-05-11Add support for ConditionSecurity=imaAuke Kok
Just as with SMACK, we don't really know if a policy has been loaded or not, as the policy interface is write-only. Assume therefore that if ima is present in securityfs that it is enabled. Update the man page to reflect that "ima" is a valid option now as well.
2013-05-10audit: since audit is apparently never going to be fixed for containers tell ↵Lennart Poettering
the user what's going on Let's try to be helpful to the user and give him a hint what he can do to make nspawn work with normal OS containers. https://bugzilla.redhat.com/show_bug.cgi?id=893751
2013-05-09systemd-python: wrap sd_login_monitorZbigniew Jędrzejewski-Szmek
2013-05-09man: document that the kernel's audit subsystem is currently incompatible ↵Lennart Poettering
with nspawn containers
2013-05-08condition, man: Add support for ConditionSecurity=smackKarol Lewandowski
According to Documentation/security/Smack.txt: In keeping with the intent of Smack, configuration data is minimal and not strictly required. The most important configuration step is mounting the smackfs pseudo filesystem. This means that checking the mount point should be enough.
2013-05-08man: add permalinks to subsection titles tooZbigniew Jędrzejewski-Szmek
2013-05-06systemd-sleep: add support for freeze and standbyZbigniew Jędrzejewski-Szmek
A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-06man: fix typos in systemd.specialRoss Lagerwall
2013-05-06man: clarify behaviour of Also= in unit filesLennart Poettering
2013-05-06man: correct SIGUSR1 semantics for journaldLennart Poettering
2013-05-06condition, man: Add support for ConditionSecurity=apparmorNirbheek Chauhan
Checking for the apparmor directory in securityfs means the apparmor module is loaded and enabled, and hence should suffice as a test. https://bugs.freedesktop.org/show_bug.cgi?id=63312
2013-05-06nspawn: explain that we look for /etc/os-release in the container directoryLennart Poettering
https://bugs.freedesktop.org/show_bug.cgi?id=64014
2013-05-06kernel-install: add default install scriptsHarald Hoyer
Do the depmod in the kernel-install hooks, so hooks can produce/install kernel modules and be part of the depmod. Also move the basic boot loader entry creation and removal to a plugin script. If PRETTY_NAME is not defined in /etc/os-release, fallback to PRETTY_NAME="Linux $KERNEL_VERSION". Add documentation for everything in the man page.
2013-05-03Spelling fixesVille Skyttä
2013-05-03man: provide "permalinks" to sections and termsZbigniew Jędrzejewski-Szmek
So no one needs to say "go to fd.o/software/systemd/man, open page X, then scroll down to section 3, and look for ..." anymore.
2013-05-03systemctl: add --plain option to list-dependenciesLukas Nykryn
This patch adds more script-friendly output for list-dependencies.
2013-05-03journal: Set the default keep free value to 15% (up from 5%)Colin Guthrie
As some SSDs are still seeing performance degredation when reaching 85% usage the default value of 5% seems a little low. Set this to 15% by default.
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-28 07:07:40 +0000