summaryrefslogtreecommitdiff
path: root/man
AgeCommit message (Collapse)Author
2013-05-16utmp: turn systemd-update-utmp-shutdown.service into a normal runtime serviceLennart Poettering
With this change systemd-update-utmp-shutdown.service is replaced by systemd-update-utmp.service which is started at boot and stays around until shutdown. This allows us to properly order the unit against both /var/log and auditd. https://bugzilla.redhat.com/show_bug.cgi?id=853104 https://bugs.freedesktop.org/show_bug.cgi?id=64365
2013-05-15units: rework systemd-random-seed-{load,save}.service to be a single serviceLennart Poettering
That way ordering it with MountsRequiredFor= works properly, as this no longer results in mount units start requests to be added to the shutdown transaction that conflict with stop requests for the same unit.
2013-05-11Add support for ConditionSecurity=imaAuke Kok
Just as with SMACK, we don't really know if a policy has been loaded or not, as the policy interface is write-only. Assume therefore that if ima is present in securityfs that it is enabled. Update the man page to reflect that "ima" is a valid option now as well.
2013-05-10audit: since audit is apparently never going to be fixed for containers tell ↵Lennart Poettering
the user what's going on Let's try to be helpful to the user and give him a hint what he can do to make nspawn work with normal OS containers. https://bugzilla.redhat.com/show_bug.cgi?id=893751
2013-05-09systemd-python: wrap sd_login_monitorZbigniew Jędrzejewski-Szmek
2013-05-09man: document that the kernel's audit subsystem is currently incompatible ↵Lennart Poettering
with nspawn containers
2013-05-08condition, man: Add support for ConditionSecurity=smackKarol Lewandowski
According to Documentation/security/Smack.txt: In keeping with the intent of Smack, configuration data is minimal and not strictly required. The most important configuration step is mounting the smackfs pseudo filesystem. This means that checking the mount point should be enough.
2013-05-08man: add permalinks to subsection titles tooZbigniew Jędrzejewski-Szmek
2013-05-06systemd-sleep: add support for freeze and standbyZbigniew Jędrzejewski-Szmek
A new config file /etc/systemd/sleep.conf is added. It is parsed by systemd-sleep and logind. The strings written to /sys/power/disk and /sys/power/state can be configured. This allows people to use different modes of suspend on systems with broken or special hardware. Configuration is shared between systemd-sleep and logind to enable logind to answer the question "can the system be put to sleep" as correctly as possible without actually invoking the action. If the user configured systemd-sleep to only use 'freeze', but current kernel does not support it, logind will properly report that the system cannot be put to sleep. https://bugs.freedesktop.org/show_bug.cgi?id=57793 https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36 http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed since they were used in only a few places and with the addition of /etc/systemd/sleep.conf it becomes easier to just append the name of each file to the dir name.
2013-05-06man: fix typos in systemd.specialRoss Lagerwall
2013-05-06man: clarify behaviour of Also= in unit filesLennart Poettering
2013-05-06man: correct SIGUSR1 semantics for journaldLennart Poettering
2013-05-06condition, man: Add support for ConditionSecurity=apparmorNirbheek Chauhan
Checking for the apparmor directory in securityfs means the apparmor module is loaded and enabled, and hence should suffice as a test. https://bugs.freedesktop.org/show_bug.cgi?id=63312
2013-05-06nspawn: explain that we look for /etc/os-release in the container directoryLennart Poettering
https://bugs.freedesktop.org/show_bug.cgi?id=64014
2013-05-06kernel-install: add default install scriptsHarald Hoyer
Do the depmod in the kernel-install hooks, so hooks can produce/install kernel modules and be part of the depmod. Also move the basic boot loader entry creation and removal to a plugin script. If PRETTY_NAME is not defined in /etc/os-release, fallback to PRETTY_NAME="Linux $KERNEL_VERSION". Add documentation for everything in the man page.
2013-05-03Spelling fixesVille Skyttä
2013-05-03man: provide "permalinks" to sections and termsZbigniew Jędrzejewski-Szmek
So no one needs to say "go to fd.o/software/systemd/man, open page X, then scroll down to section 3, and look for ..." anymore.
2013-05-03systemctl: add --plain option to list-dependenciesLukas Nykryn
This patch adds more script-friendly output for list-dependencies.
2013-05-03journal: Set the default keep free value to 15% (up from 5%)Colin Guthrie
As some SSDs are still seeing performance degredation when reaching 85% usage the default value of 5% seems a little low. Set this to 15% by default.
2013-05-03man: add various filenames to the indexZbigniew Jędrzejewski-Szmek
Everything which is an absolute filename marked with <filename></filename> lands in the index, unless noindex= attribute is present. Should make it easier for people to find stuff when they are looking at a file on disk. Various formatting errors in manpages are fixed, kernel-install(1) is restored to formatting sanity.
2013-05-02man: link to socket activation blog entriesZbigniew Jędrzejewski-Szmek
2013-05-02Add help option to bootchart man pageNathaniel Chen
Bootchart has a help option. For the sake of consistency, this patch adds it to the man page. Also, the TODO is updated. Bootcharts were added to the journal in commit c4d58b0.
2013-05-01cgls: add --machine/-MZbigniew Jędrzejewski-Szmek
cg_get_machine_path is modified to include the escaped machine name + ".nspawn" if the machine argument is nonnull.
2013-04-30man: improve documentation for specifiersLennart Poettering
2013-04-30man: we need to be more careful with the unit search paths we documentLennart Poettering
We generally document the suggested paths, not the paths possible in weird, non-standard setups. We do this in order to not confuse administrators/users unnecessarily and to push people to install things into the same directories on all distributions. We are PID 1 after all, the really basic building block of the OS. Unlike for an app there's very little benefit in being entirely relocatable.
2013-04-30id128: when taking user input for a 128bit ID, validate syntaxLennart Poettering
Also, always accept both our simple hexdump syntax and UUID syntax.
2013-04-29man: clarify what Restart= meansZbigniew Jędrzejewski-Szmek
Related to https://bugzilla.redhat.com/show_bug.cgi?id=957135.
2013-04-26systemd-analyse: add "critical-chain" commandHarald Hoyer
"critical-chain" prints a tree of the critical chain of units $ ./systemd-analyze critical-chain graphical.target @1.226s └─multi-user.target @1.226s └─nfs-lock.service @961ms +265ms └─rpcbind.service @958ms +1ms └─network.target @957ms └─NetworkManager.service @434ms +522ms └─basic.target @428ms └─sockets.target @428ms └─dbus.socket @428ms └─sysinit.target @427ms └─systemd-tmpfiles-setup.service @411ms +15ms └─local-fs.target @410ms └─boot-efi.automount @410ms └─boot.mount @397ms +9ms └─local-fs-pre.target @192ms └─systemd-udevd.service @187ms +5ms └─systemd-udevd-control.socket @140ms └─-.mount With the "--fuzz=<ms>" parameter one can display more units around the critical units. $ ./systemd-analyze --fuzz=10ms critical-chain └─multi-user.target @1.226s └─nfs-lock.service @961ms +265ms ├─rpcbind.service @958ms +1ms │ └─network.target @957ms │ └─NetworkManager.service @434ms +522ms │ ├─basic.target @428ms │ │ ├─sockets.target @428ms │ │ │ ├─dbus.socket @428ms │ │ │ │ └─sysinit.target @427ms │ │ │ │ ├─systemd-tmpfiles-setup.service @411ms +15ms │ │ │ │ │ └─local-fs.target @410ms │ │ │ │ │ └─boot-efi.automount @410ms │ │ │ │ │ └─boot.mount @397ms +9ms │ │ │ │ │ └─local-fs-pre.target @192ms │ │ │ │ │ └─systemd-udevd.service @187ms +5ms │ │ │ │ │ ├─systemd-udevd-control.socket @140ms │ │ │ │ │ │ └─-.mount │ │ │ │ │ └─systemd-udevd-kernel.socket @140ms │ │ │ │ └─swap.target @421ms │ │ │ │ └─dev-disk-by\x2duuid-....swap @414ms +6ms │ │ │ │ └─systemd-journald.socket │ │ │ ├─rpcbind.socket @428ms │ │ │ └─cups.socket @428ms │ │ ├─paths.target @428ms │ │ │ └─cups.path @428ms │ │ ├─timers.target @427ms │ │ │ └─systemd-tmpfiles-clean.timer @427ms │ │ └─sysinit.target @427ms │ │ └─... │ └─dbus.socket @428ms │ └─... └─network.target @957ms └─...
2013-04-24login: allow watching virtual machines with sd_get_machine_names()Lennart Poettering
2013-04-24login: add new call sd_get_machine_names() to get a list of current virtual ↵Lennart Poettering
machines and containers
2013-04-24systemctl: show reverse dependencies or before/after orderingZbigniew Jędrzejewski-Szmek
Also update completion scripts a bit.
2013-04-23man: link systemd-tmpfiles-setup-dev.serviceUmut Tezduyar
2013-04-18man: document the new login class 'background'Lennart Poettering
2013-04-18man: document the new sd_journal_add_conjunction() callLennart Poettering
2013-04-18cryptsetup-generator: add support for rd.luks.key=Harald Hoyer
Also clarify rd.luks.uuid and luks.uuid in the manual. https://bugzilla.redhat.com/show_bug.cgi?id=905683
2013-04-18man: document that timeout=0 is the default for entries in crypttabLennart Poettering
2013-04-18systemctl: drop usage of "internally loaded modules"Lennart Poettering
I wouldn't know what "internally" is supposed to mean hear, and we use this terminology in this context nowhere else, so let's drop this.
2013-04-17Revert "man/systemd.xml: change the signal names to kill systemd"Harald Hoyer
This reverts commit 432c30d25fc2a7b4939d5ea6c29708e1323a2b9c. Suggestion was to fix bash instead. :-/
2013-04-17man/systemd.xml: change the signal names to kill systemdHarald Hoyer
Using the signal name to put systemd in debug mode with bash results in: $ kill -s SIGRTMIN+22 1 bash: kill: SIGRTMIN+22: invalid signal specification whereas this works: $ kill -s SIGRTMAX-8 1 /usr/bin/kill understands both signal names, so just change them to the bash names.
2013-04-17systemctl: clarify usage of "--all" versus list-unit-filesHarald Hoyer
Novice users might think, that $ systemctl --all is equal to $ systemctl list-unit-files https://bugzilla.redhat.com/show_bug.cgi?id=748512
2013-04-17journalctl: specify "--unit=" and "--user-unit" multiple timesHarald Hoyer
Previously only one "--unit=" or "--user-unit" could be specified. With this patch, journalcrtl can show multiple units. $ journalctl -u systemd-udevd.service -u sshd.service -u crond.service -b -- Logs begin at Sa 2013-03-23 11:08:45 CET, end at Fr 2013-04-12 09:10:22 CEST. -- Apr 12 08:41:37 lenovo systemd[1]: Started udev Kernel Device Manager. Apr 12 08:41:37 lenovo systemd[1]: Stopped udev Kernel Device Manager. Apr 12 08:41:38 lenovo systemd[1]: Started udev Kernel Device Manager. Apr 12 08:41:38 lenovo crond[291]: (CRON) INFO (Syslog will be used instead of sendmail.) Apr 12 08:41:38 lenovo crond[291]: (CRON) INFO (running with inotify support) Apr 12 08:41:39 lenovo systemd[1]: Starting OpenSSH server daemon... Apr 12 08:41:39 lenovo systemd[1]: Started OpenSSH server daemon. Apr 12 08:41:39 lenovo sshd[355]: Server listening on 0.0.0.0 port 22. Apr 12 08:41:39 lenovo sshd[355]: Server listening on :: port 22. Apr 12 08:41:39 lenovo mtp-probe[373]: checking bus 1, device 8: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.6/1-1.5.6.2/1-1.5.6.2.1"
2013-04-17man: fix syntax in nsenter exampleZbigniew Jędrzejewski-Szmek
Apparently nsenter doesn't handle options concatenated together. I'm pretty sure it worked at one point, but it seems like magic, since each of those options can take arguments.
2013-04-17sd-messages.h: add new bootchart message idZbigniew Jędrzejewski-Szmek
2013-04-16nspawn: introduce the new /machine/ tree in the cgroup tree and move ↵Lennart Poettering
containers there Containers will now carry a label (normally derived from the root directory name, but configurable by the user), and the container's root cgroup is /machine/<label>. This label is called "machine name", and can cover both containers and VMs (as soon as libvirt also makes use of /machine/). libsystemd-login can be used to query the machine name from a process. This patch also includes numerous clean-ups for the cgroup code.
2013-04-15Fix spelling errors using 'codespell' toolAnatol Pomozov
2013-04-15sd-login: add a sd_pid_get_user_unit() callLennart Poettering
2013-04-14readahead: document options and commands.Auke Kok
2013-04-12systemctl: new verb 'list-sockets'Zbigniew Jędrzejewski-Szmek
LISTEN UNIT ACTIVATES /dev/initctl systemd-initctl.socket systemd-initctl.service /dev/log systemd-journald.socket systemd-journald.service ... [::]:19531 systemd-journal-gatewayd.socket systemd-journal-gatewayd.service kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service 17 sockets listed. Pass --all to see loaded but inactive sockets, too.
2013-04-11systemctl: allow multiple arguments to --typeZbigniew Jędrzejewski-Szmek
This mirrors --property, and is generally useful. New functionality is used in bash completion. In case of zsh completion, new functionality is less useful because of caching. Nevertheless, zsh completion for restart is made to behave more-or-less the same as bash completion. At least sockets can be restarted.
2013-04-09units: fix some left-over mentions of remote-fs-setup.targetLennart Poettering
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-14 21:11:57 +0000