summaryrefslogtreecommitdiff
path: root/man
AgeCommit message (Collapse)Author
2015-06-18Merge pull request #293 from teg/man-revertKay Sievers
man: revert dynamic paths for split-usr setups
2015-06-18man: revert dynamic paths for split-usr setupsTom Gundersen
This did not really work out as we had hoped. Trying to do this upstream introduced several problems that probably makes it better suited as a downstream patch after all. At any rate, it is not releaseable in the current state, so we at least need to revert this before the release. * by adjusting the path to binaries, but not do the same thing to the search path we end up with inconsistent man-pages. Adjusting the search path too would be quite messy, and it is not at all obvious that this is worth the effort, but at any rate it would have to be done before we could ship this. * this means that distributed man-pages does not make sense as they depend on config options, and for better or worse we are still distributing man pages, so that is something that definitely needs sorting out before we could ship with this patch. * we have long held that split-usr is only minimally supported in order to boot, and something we hope will eventually go away. So before we start adding even more magic/effort in order to make this work nicely, we should probably question if it makes sense at all.
2015-06-18man: udev_device - finish new_* man pageTom Gundersen
A description of device_id lacked. We still need to do the other udev_device_* man pages.
2015-06-18Merge pull request #269 from teg/udev-docs-1Kay Sievers
man: libudev - add description to udev_device_*
2015-06-17man: minor typo fixLennart Poettering
2015-06-17man: libudev - add description to udev_device_*Tom Gundersen
2015-06-17turn kdbus support into a runtime optionKay Sievers
./configure --enable/disable-kdbus can be used to set the default behavior regarding kdbus. If no kdbus kernel support is available, dbus-dameon will be used. With --enable-kdbus, the kernel command line option "kdbus=0" can be used to disable kdbus. With --disable-kdbus, the kernel command line option "kdbus=1" is required to enable kdbus support.
2015-06-17Merge pull request #221 from utezduyar/man-cgtop-explain-max-cpuLennart Poettering
man: explain max CPU load on cgtop
2015-06-17man: add libudev man-pages (skeletons)David Herrmann
This adds man-pages for most of the libudev symbols we export. Similar symbols are grouped together in a single man-page, with respective links added. All man-pages contain the full skeleton including NAME, SYNOPSIS, RETURN VALUE and SEE ALSO. However, most of them still lack the DESCRIPTION part. This should be copied from the gtkdoc descriptions in src/libudev/libudev*.[ch]. Any help is welcome! (the whole skeleton is already done, so it's really just about the prose-part of the man-pages to be written). Missing from the man-pages are the following parts: - udev_set_log_fn() - udev_[gs]et_log_priority() - udev_[gs]et_userdata() - udev_list_entry_foreach() - udev_device_get_seqnum() - udev_device_get_usec_since_initialized() - udev_util_encode_string() These are considered legacy, afaik. If not, please feel free to add them now! Furthermore, udev-hwdb and udev-queue are not documented at all (for the same reasons).
2015-06-17man: explain max CPU load on cgtopUmut Tezduyar Lindskog
2015-06-17man: always build sd-bus man pages, even if kdbus is disabledLennart Poettering
After all, we now moved sd-bus out of the kdbus conditional, hence the man pages should be too.
2015-06-17doc: improve readability in journald.conf.5Jan Synacek
2015-06-15man: document that ExecStop= needs a synchronous toolLennart Poettering
As requested in #199.
2015-06-15man: document that SIGCONT always follows SIGTERMLennart Poettering
As requested in #199.
2015-06-15man: clarify overriding semantics of systemd-gpt-auto-generatorLennart Poettering
Specifically: /etc/fstab overrides the units itself, but not the deps. See #168.
2015-06-14Fix typos in man/timesyncd.conf.xmlIgor Vuk
2015-06-14man: don't mention '/run' in hwdb.manDavid Herrmann
We do not support '/run' for hwdb files. Drop it from the man-pages so people don't accidentally use it. This was reported by: Peter Hutterer <peter.hutterer@who-t.net>
2015-06-14Merge pull request #178 from utezduyar/man-sd_bus_message_get_credsDavid Herrmann
Improve the documentation of bus credentials by mentioning send-time metadata. This needs more love, we should really clarify metadata details here. However, this is still better than nothing, so it's fine.
2015-06-12man: mention sd_bus_message_get_creds as another wayUmut Tezduyar Lindskog
of retrieving sd_bus_creds even though sd_bus_creds itself contains very limited information.
2015-06-12Merge pull request #173 from mischief/ipforwarding-3Lennart Poettering
IPForwarding=kernel v3
2015-06-11man: document IPForward=kernel optionNick Owens
2015-06-11Merge pull request #3 from threatgrid/more_cgtop_enhancementsLennart Poettering
cgtop enhancements for easier machine-readable output
2015-06-10man: clarify that IMPORT{program} is done only for zero exit codeAndrei Borzenkov
2015-06-10man: udevd - correct default event timeoutTom Gundersen
This was changed from 30 to 180 seconds quite some time ago.
2015-06-09cgtop: allow user to force looping behavior even in non-TTY modeCharles Duffy
2015-06-09cgtop: raw output option (disable conversion to human-readable units)Charles Duffy
2015-06-08Revert "networkd: create "kernel" setting for IPForwarding"Lennart Poettering
2015-06-08man: systemd.link - explain random MAC addressesTom Gundersen
Two of the bits in the MAC address are set unconditioanlly, and the rest is randomized, make this clear in the documentation (as it currently read as if it was all random).
2015-06-03systemctl: Use /usr/bin/editor if availableMichael Biebl
If the EDITOR environment variable is not set, the Debian policy recommends to use the /usr/bin/editor program as default editor. This file is managed via the dpkg alternatives mechanism and typically used in Debian/Ubuntu and derivatives to configure the default editor. See section 11.4 of the Debian policy [1]. Therefor prefer /usr/bin/editor over specific editors if available. [1] https://www.debian.org/doc/debian-policy/ch-customized-programs.html
2015-06-03Merge pull request #41 from mischief/ipforwardingTom Gundersen
networkd: create "kernel" setting for IPForwarding
2015-06-02man: document IPForward=kernel optionNick Owens
2015-06-03remove gudev and gtk-docKay Sievers
The library moved to: https://git.gnome.org/browse/libgudev/
2015-06-02man: replace hard-coded /usr/libDaniel Mack
Replace some /usr/lib occurences in man/ with &rootprefix;/lib.
2015-05-28man: use configured path for mount and umount binaries in manpagesFilipe Brandenburger
Export the MOUNT_PATH and UMOUNT_PATH variables as XML entities and use them in the systemctl.1 manpage instead of hardcoding the path in /usr/bin. Tested: - Ran ./configure ac_cv_path_MOUNT_PATH=/bin/mount (same for umount) and rebuilt the manpages, confirmed that the correct path was in man/systemctl.1 - Rebuilt man/systemd.directives.xml and the man pages derived from it, confirmed that the correct paths were there as well.
2015-05-28man: generate configured paths in manpagesFilipe Brandenburger
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions like Debian which still have not adopted a /usr merge setup. Use XML entities from man/custom-entities.ent to replace configured paths while doing XSLT processing of the original XML files. There was precedent of some files (such as systemd.generator.xml) which were already using this approach. This addresses most of the (manual) fixes from this patch: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220 The idea of using generic XML entities was presented here: http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html This patch solves almost all the issues, with the exception of: - Path to /bin/mount and /bin/umount. - Generic statements about preference of /lib over /etc. These will be handled separately by follow up patches. Tested: - With default configure settings, ran "make install" to two separate directories and compared the output to confirm they matched exactly. - Used a set of configure flags including $CONFFLAGS from Debian: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules Installed the tree and confirmed the paths use /lib/systemd instead of /usr/lib/systemd and that no other unexpected differences exist. - Confirmed that `make distcheck` still passes.
2015-05-27man: fix systemd.resource-control(5) volume numberPatrick Donnelly
2015-05-26treewide: fix typosTorstein Husebø
2015-05-25swap: use swapon -oKarel Zak
This patch simplify swapon usage in systemd. The command swapon(8) since util-linux v2.26 supports "-o <list>". The idea is exactly the same like for mount(8). The -o specifies options in fstab-compatible way. For systemd it means that it does not have to care about things like "discard" or another swapon specific options. swapon -o <options-from-fstab> For backward compatibility the code cares about "Priority:" swap unit field (for a case when Priority: is set, but pri= in the Options: is missing). References: http://lists.freedesktop.org/archives/systemd-devel/2014-October/023576.html
2015-05-23fix typos in systemd-nspawn man pageJonathan Boulle
2015-05-21nspawn: finish user namespace supportLennart Poettering
2015-05-19hostname: Allow comments in /etc/hostnameMartin Pitt
The hostname(1) tool allows comments in /etc/hostname. Introduce a new read_hostname_config() in hostname-util which reads a hostname configuration file like /etc/hostname, strips out comments, whitespace, and cleans the hostname. Use it in hostname-setup.c and hostnamed and remove duplicated code. Update hostname manpage. Add tests. https://launchpad.net/bugs/1053048
2015-05-18man: explain UseDomains a bit moreZbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=85397
2015-05-18fstab-generator: add x-systemd.requires and x-systemd.requires-mounts-forKarel Zak
Currently we have no way how to specify dependencies between fstab entries (or another units) in the /etc/fstab. It means that users are forced to bypass fstab and write .mount units manually. The patch introduces new systemd fstab options: x-systemd.requires=<PATH> - to specify dependence an another mount (PATH is translated to unit name) x-systemd.requires=<UNIT> - to specify dependence on arbitrary UNIT x-systemd.requires-mounts-for=<PATH ...> - to specify dependence on another paths, implemented by RequiresMountsFor=. The option may be specified more than once. For example two bind mounts where B depends on A: /mnt/test/A /mnt/test/A none bind,defaults /mnt/test/A /mnt/test/B none bind,x-systemd.requires=/mnt/test/A More complex example with overlay FS where one mount point depends on "low" and "upper" directories: /dev/sdc1 /mnt/low ext4 defaults /dev/sdc2 /mnt/high ext4 defaults overlay /mnt/merged overlay lowerdir=/mnt/low,upperdir=/mnt/high/data,workdir=/mnt/high/work,x-systemd.requires-mounts-for=/mnt/low,x-systemd.requires-mounts-for=mnt/high https://bugzilla.redhat.com/show_bug.cgi?id=812826 https://bugzilla.redhat.com/show_bug.cgi?id=1164334
2015-05-18Use "new" --job-mode= option in more placesZbigniew Jędrzejewski-Szmek
--irreversible/--ignore-dependencies/--fail are deprececated since 4dc5b821ae737914499119e29811fc3346e3d97c. Also add shell completions for --jobs-mode.
2015-05-15coredump: make sure we vacuum by defaultLennart Poettering
Only if both keep_free and max_use are actually 0 we can shortcut things and avoid vacuuming. If either are positive or -1 we need to execute the vacuuming. http://lists.freedesktop.org/archives/systemd-devel/2015-April/031382.html
2015-05-15man: IPMasquerade only implies IPForward=ipv4Benedikt Morbach
at least that's what the code does.
2015-05-15networkd: don't touch global forwarding settingBenedikt Morbach
This reverts commit 43c6d5abacaebf813845934ec8d5e5ee3c431854 (and a small part of 4046d8361c55c80ab8577aea52523b9e6eab0d0c) It turns out we don't actually need to set the global ip_forward setting. The only relevant setting is the one on each interface. What the global toggle actually does is switch forwarding on/off for all currently present interfaces and change the default for new ones. That means that by setting the global ip_forward we - Introduce a race condition, because if the interface with IPForward=yes is brought up after one with IPForward=no, both will have forwarding enabled, because the global switch turns it on for all interfaces. If the other interface comes up first networkd correctly sets forward=0 and it doesn't get overridden. - Change the forwarding setting for interfaces that networkd is not configured to touch, even if the user disabled forwarding via sysctl, either globally or per-interface As forwarding works fine without this, as long as all relevant interfacest individually set IPForward=yes: just drop it This means that non-networkd interfaces use the global default while networkd interfaces default to off if IPForward isn't given.
2015-05-15systemctl: introduce --now for enable, disable and maskJan Synacek
https://bugs.freedesktop.org/show_bug.cgi?id=42940
2015-05-13nspawn: rework custom mount point order, and add support for overlayfsLennart Poettering
Previously all bind mount mounts were applied in the order specified, followed by all tmpfs mounts in the order specified. This is problematic, if bind mounts shall be placed within tmpfs mounts. This patch hence reworks the custom mount point logic, and alwas applies them in strict prefix-first order. This means the order of mounts specified on the command line becomes irrelevant, the right operation will always be executed. While we are at it this commit also adds native support for overlayfs mounts, as supported by recent kernels.
2015-05-11treewide: Correct typos and spell plural of bus consistentTorstein Husebø