| Age | Commit message (Collapse) | Author |
|---|
|
This recently moved from /cgroups/ to /cgroup-v1/.
Fixes #2958
|
|
*.localdomain != localhost
|
|
".localdomain" is not a reserved suffix (or prefix). I'm not aware of any
product expecting *.localdomain to resolve to localhost, however I am aware of
at least one product that defaults to ".localdomain" as its DNS suffix provided
via DHCP (pfSense). This leads to unexpected results when attempting to access
a host that's offline (or a host that's online, when nsswitch.conf is
[mis-]configured to have myhostname ahead of DNS).
Operate on:
localhost (and localhost.)
*.localhost (and *.localhost.)
localhost.localdomain (and localhost.localdomain.)
*.localhost.localdomain (and *.localhost.localdomain.)
We should not cover:
*.localdomain (nor *.localdomain.)
localdomain (nor localdomain.)
|
|
Offline updates man page
|
|
In 110ceee58e5bc796c03a7db2109f85a999d5bc2e we removed the period after
printing the started units. This makes copying the unit name easier but
results in improper English.
This adds a colon before printing the units, which makes the output
look better.
|
|
Most of the changes are already implemented in dnf-system-upgrade.service
and packagekit-offline-update.service, so this update mostly changes the
documentation to match status quo.
|
|
|
|
|
|
|
|
If you start a unit with systemd-run you usually need its name to
inspect it or stop it. Removing the period makes copying the unit name
easier.
|
|
|
|
core: set NoNewPrivileges for seccomp if we don't have CAP_SYS_ADMIN
|
|
|
|
This imports most of http://www.freedesktop.org/wiki/Software/systemd/SystemUpdates/
to turn it into a man page. Similarly for the man page about generators,
this will make it easier to keep up-to-date, keep a history of changes,
and make it more discoverable for end-users.
|
|
Signed-off-by: Petros Angelatos <petrosagg@gmail.com>
|
|
|
|
|
|
systemd-ask-password can store passwords in kernel keyring. However it
uses to print the passwords to standard output nevertheless. Depending
on where systemd-ask-password is called passwords may end on display
or in log, leaking sensitive information.
This allows to make systemd-ask-password quiet, effectively disabling
printing passwords to standard output.
|
|
The manpage of seccomp specify that using seccomp with
SECCOMP_SET_MODE_FILTER will return EACCES if the caller do not have
CAP_SYS_ADMIN set, or if the no_new_privileges bit is not set. Hence,
without NoNewPrivilege set, it is impossible to use a SystemCall*
directive with a User directive set in system mode.
Now, NoNewPrivileges is set if we are in user mode, or if we are in
system mode and we don't have CAP_SYS_ADMIN, and SystemCall*
directives are used.
|
|
|
|
man: clarify unit ordering language
|
|
|
|
Remove systemd-bootchart
|
|
|
|
|
|
So far we recommended placing "nss-mymachines" after "nss-resolve" in the order
of preference in /etc/nsswitch.conf. This change reverse this order.
Rationale: single-label names are resolved via LLMNR by resolved, which has to
time out if no peer by that name exists. By placing "nss-mymachines" first
(which always responds immediately) we avoid running into this timeout for most
containers. Both modules should return the same data if LLMNR is used by the
container anyway.
While we are at it, improve the man pages of the three NSS modules in other
ways a bit.
|
|
Networkctl prettification
|
|
|
|
Better to use the mirror manager and https.
|
|
This commit rips out systemd-bootchart. It will be given a new home, outside
of the systemd repository. The code itself isn't actually specific to
systemd and can be used without systemd even, so let's put it somewhere
else.
|
|
network: minor manpage clarifications
|
|
udevadm test-builtin can be very useful for testing .link files, so add a reference.
Addresses issue #2406.
|
|
Make it clear that we are talking of links (in the sense used in networkd) and not ports.
Addresses issue #964.
|
|
Enabling router advertisement may even trigger SLAAC or DHCPv6 to be used to configure
IPv6 addresses on the link. It may not be obvious that only in the SLAAC case will the
Token have an effect. Clarify this in the man page.
Addresses issue #863.
|
|
Among other fixes, add information about more architectures that are supported
these days.
|
|
Also, beef up the LLDP documentation a bit.
|
|
We are now at F23, hence let's use that as example.
|
|
This way "networkctl status" becomes a bit more useful by default, as router
information is just visible, without any further configuration.
LLDP reception is fully passive and relatively low simple and low traffic,
hence this should be safe to enable by default.
|
|
interface names
This way, the output may be reduced to only show data about the specified
interfaces.
|
|
This reworks the sd-lldp substantially, simplifying things on one hand, and
extending the logic a bit on the other.
Specifically:
- Besides the sd_lldp object only one other object is maintained now,
sd_lldp_neighbor. It's used both as storage for literal LLDP packets, and for
maintainging info about peers in the database. Separation between packet, TLV
and chassis data is not maintained anymore. This should be a major
simplification.
- The sd-lldp API has been extended so that a couple of per-neighbor fields may
be queried directly, without iterating through the object. Other fields that
may appear multiple times, OTOH have to be iterated through.
- The maximum number of entries in the neighbor database is now configurable
during runtime.
- The generation of callbacks from sd_lldp objects is more restricted:
callbacks are only invoked when actual data changed.
- The TTL information is now hooked with a timer event, so that removals from
the neighbor database due to TTLs now result in a callback event.
- Querying LLDP neighbor database will now return a strictly ordered array, to
guarantee stability.
- A "capabilities" mask may now be configured, that selects what type of LLDP
neighbor data is collected. This may be used to restrict collection of LLDP
info about routers instead of all neighbors. This is now exposed via
networkd's LLDP= setting.
- sd-lldp's API to serialize the collected data to text files has been removed.
Instead, there's now an API to extract the raw binary data from LLDP neighbor
objects, as well as one to convert this raw binary data back to an LLDP
neighbor object. networkd will save this raw binary data to /run now, and the
client side can simply parse the information.
- support for parsing the more exotic TLVs has been removed, since we are not
using that. Instead there are now APIs to extract the raw data from TLVs.
Given how easy it is to parse the TLVs clients should do so now directly
instead of relying on our APIs for that.
- A lot of the APIs that parse out LLDP strings have been simplified so that
they actually return strings, instead of char arrays with a length. To deal
with possibly dangerous characters the strings are escaped if needed.
- APIs to extract and format the chassis and port IDs as strings has been
added.
- lldp.h has been simplified a lot. The enums are anonymous now, since they
were never used as enums, but simply as constants. Most definitions we don't
actually use ourselves have eben removed.
|
|
|
|
https://tools.ietf.org/html/rfc6698#section-2.2 says:
> The certificate association data field MUST be represented as a string
> of hexadecimal characters. Whitespace is allowed within the string of
> hexadecimal characters
|
|
$ systemd-resolve --tlsa fedoraproject.org
_443._tcp.fedoraproject.org IN TLSA 0 0 1 GUAL5bejH7czkXcAeJ0vCiRxwMnVBsDlBMBsFtfLF8A=
-- Cert. usage: CA constraint
-- Selector: Full Certificate
-- Matching type: SHA-256
$ systemd-resolve --tlsa=tcp fedoraproject.org:443
_443._tcp.fedoraproject.org IN TLSA 0 0 1 GUAL5bejH7czkXcAeJ0vCiRxwMnVBsDlBMBsFtfLF8A=
...
$ systemd-resolve --tlsa=udp fedoraproject.org
_443._udp.fedoraproject.org: resolve call failed: '_443._udp.fedoraproject.org' not found
v2:
- use uint16_t
- refuse port 0
|
|
|
|
The output didn't specify if the default for --cname/--search/--legend and
other options was yes or no. Change the description to be explicit about that.
Also make the --help output and man page closer.
|
|
I think example output allows the reader of the man page to
see what functionlity is provided without running the commands
themselves. Specific values in the examples are bound to get out
of date but this is not a problem.
|
|
remove bus-proxyd
|
|
It has fairly wide functionality now and the interface has been
stable for a while. It it a useful testing tool.
The name is changed to better indicate what it does.
|
|
Previous code only allowed a single name to be passed, and duplicated
it over all descriptors. For the sake of testing, allow different
names and in arbitrary number. If just one is given, duplicate it
to match the number of sockets. This matches previuos behaviour.
Since this is a testing tool, it seems useful to allow passing invalid
names to test application behaviour with invalid names. Hence, only
warn. When warning, escape the name.
|
|
Some spring cleaning
|
