summaryrefslogtreecommitdiff
path: root/man
AgeCommit message (Collapse)Author
2014-06-30man: a couple of additions to file-hierarchy(7)Lennart Poettering
2014-06-30man: drop references to manual StandardError=syslog from daemon(7), we do ↵Lennart Poettering
this implicitly since ages
2014-06-30man: add a minimized, modernized description of the file system hierarchy ↵Lennart Poettering
systemd suggests
2014-06-29man: document the sysusers toolLennart Poettering
2014-06-29Add support for DHCP static route optionsEugene Yakubovich
This adds support for DHCP options 33 and 121: Static Route and Classless Static Route. To enable this feature, set UseRoutes=true in .network file. Returned routes are added to the routing table.
2014-06-29networkd: merge DHCPv4 and DHCPv6 configTom Gundersen
If there are v4 or v6 specific options we can keep those in separate sections, but for the common options, we will use only one. Moreovere only use DHCP=[yes/both|no/none|v4|v6] to enable or disable the clients.
2014-06-28doc: typographical improvements and choice of wordsJan Engelhardt
2014-06-28doc: grammatical correctionsJan Engelhardt
2014-06-27man: split systemd.network(5) and related into various sections for better ↵Lennart Poettering
readability
2014-06-27man: document automatic networkd IP range allocationLennart Poettering
2014-06-27man: fix sd_watchdog_enabled() prototype in man pageLennart Poettering
https://bugs.freedesktop.org/show_bug.cgi?id=80597
2014-06-27coredump: replace Compression= setting by simpler Compress= boolean settingLennart Poettering
Let's move things closer to journald's configuration settings, which knows Compress= already, as a boolean. This makes things more uniform, but also gives us more freedom to possibly swap out the used compression algorithm one day.
2014-06-27coredump: don't expose the compression level as configuration optionLennart Poettering
This sounds overly low-level and implementation-detaily. Let's just use the default level XZ suggests. This gives us more room to possibly swap out the compression algorithm used, as the compression level range will not leak into user configuration.
2014-06-27coredump: add simple coredump vacuumingLennart Poettering
When disk space taken up by coredumps grows beyond a configured limit start removing the oldest coredump of the user with the most coredumps, until we get below the limit again.
2014-06-26man: add coredump.conf(5)Zbigniew Jędrzejewski-Szmek
2014-06-25systemctl: add new "is-system-running" command to check whether system is ↵Lennart Poettering
fully up https://bugs.freedesktop.org/show_bug.cgi?id=66926
2014-06-23Revert "Add systemd-coredumpctl as an alias for coredumpctl"Zbigniew Jędrzejewski-Szmek
This reverts the documentation part of commit dfdd0e0730385eef08f019863fd41168b05b6ab0.
2014-06-23man: fix path in crypttab(5)Zbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=75816
2014-06-22Add systemd-coredumpctl as an alias for coredumpctlZbigniew Jędrzejewski-Szmek
Should make the transition easier for exisiting users.
2014-06-22man: untabify systemd-resolved.service.xmlZbigniew Jędrzejewski-Szmek
2014-06-22fix systemd-resolved reference in man pageJonathan Boulle
Guess this was missed in the copy-paste :-)
2014-06-20tmpfiles: copy/link /usr/share/factory/ files when the source argument is ↵Kay Sievers
omitted
2014-06-20debug-generator: add new kernel cmdline option systemd.wants= to add units ↵Lennart Poettering
to the initial transaction
2014-06-19man: also describe an udev rule for bridge sysctlZbigniew Jędrzejewski-Szmek
2014-06-19man: document statically loading modules for sysctl settingsZbigniew Jędrzejewski-Szmek
https://bugzilla.redhat.com/show_bug.cgi?id=1022977 https://bugzilla.novell.com/show_bug.cgi?id=725412
2014-06-19tmpfiles: make sure "C" doesn't copy anything if the destination already existsLennart Poettering
Previously it would recursively copy the entire tree in, and descend into subdirectories even if the destination already exists. Let's do what the documentation says and not do that. If files down the tree shall be copied too, they should get their own "C" lines.
2014-06-19man: document new coredumpctl commandsLennart Poettering
2014-06-19man: add documentation for systemd-debug-generatorLennart Poettering
2014-06-19man: add new kernel command line switches to kernel-command-line(7)Lennart Poettering
2014-06-19man: fix typoRonny Chevalier
2014-06-19coredump: coredumpctl is so useful now, make it a first-class citizenLennart Poettering
Drop the "systemd-" prefix, renaming it from "systemd-coredumpctl" to "coredumpctl".
2014-06-19journald: make SplitMode=uid the defaultLennart Poettering
Now that we actually can distuingish system and normal users there's no point in taking session information into account anymore when splitting up logs. This has the beenfit with that coredump information will actually end up in each user's own journal.
2014-06-18cryptsetup: introduce new cryptsetup-pre.traget unit so that services can ↵Lennart Poettering
make sure they are started before and stopped after any LUKS setup https://bugzilla.redhat.com/show_bug.cgi?id=1097938
2014-06-18tmpfiles: add "+" modifier support to b, c, p lines in addition to LLennart Poettering
2014-06-17man: fix typoZbigniew Jędrzejewski-Szmek
2014-06-17install: introduce new DefaultInstance= field for [Install] sectionsLennart Poettering
The DefaultInstance= name is used when enabling template units when only specifying the template name, but no instance. Add DefaultInstance=tty1 to getty@.service, so that when the template itself is enabled an instance for tty1 is created. This is useful so that we "systemctl preset-all" can work properly, because we can operate on getty@.service after finding it, and the right instance is created.
2014-06-17install: beef up preset logic to limit to only enable or only disable, and ↵Lennart Poettering
do all-unit preset operations The new "systemctl preset-all" command may now be used to put all installed units back into the enable/disable state the vendor/admin encoded in preset files. Also, introduce "systemctl --preset-mode=enable-only" and "systemctl --preset-mode=disable-only" to only apply the enable or only the disable operations of a "systemctl preset" or "systemctl preset-all" operation. "systemctl preset-all" implements this RFE: https://bugzilla.redhat.com/show_bug.cgi?id=630174
2014-06-16tmpfiles: add new "L+" command as stronger version of "L", that removes the ↵Lennart Poettering
destination before creating a symlink Also, make use of this for mtab as long as mount insists on creating it even if we invoke it with "-n".
2014-06-16mount: add new SloppyOptions= setting for mount units, mapping to mount(8)'s ↵Lennart Poettering
"-s" switch
2014-06-13os-release: define /usr/lib/os-release as fallback for /etc/os-releaseLennart Poettering
The file should have been in /usr/lib/ in the first place, since it describes the OS container in /usr (and not the configuration in /etc), hence, let's support os-release files in /usr/lib as fallback if no version in /etc exists, following the usual override logic. A prior commit already enabled tmpfiles to create /etc/os-release as a symlink to /usr/lib/os-release should it be missing, thus providing nice compatibility with applications only checking in /etc. While it's probably a good idea if all apps check both locations via a fallback logic, it is only necessary in the early boot process, as long as the /etc/os-release symlink has not been restored, in case we boot with an empty /etc.
2014-06-11units: introduce network-pre.target as place to hook in firewallsLennart Poettering
network-pre.target is a passive target that should be pulled in by services that want to be executed before any network is configured (for example: firewall scrips). network-pre.target should be ordered before all network managemet services (but not be pulled in by them). network-pre.target should be order after all services that want to be executed before any network is configured (and be pulled in by them).
2014-06-11tmpfiles: add ability to mask access mode by pre-existing access mode on ↵Lennart Poettering
files/directories This way it makes a lot more sense to specify an access mode for "Z" lines.
2014-06-11tmpfiles: when processing lines, always process prefixes before suffixesLennart Poettering
If two lines refer to paths that are suffix and prefix of each other, then always process the prefix first, the suffix second. In all other cases strictly process rules in the order they appear in the files. This makes creating /var/run as symlink to /run a lot more fun, since it is automatically created first.
2014-06-11nspawn: add new --tmpfs= option to mount a tmpfs on specific directories, ↵Lennart Poettering
such as /var
2014-06-10tmpfiles: get rid of "m" lines, make them redundant by "z"Lennart Poettering
"m" so far has been a non-globbing version of "z". Since this makes it quite redundant, let's get rid of it. Remove "m" from the man pages, beef up "z" docs instead, and make "m" nothing more than a compatibility alias for "z".
2014-06-10tmpfiles: add new "C" line for copying files or directoriesLennart Poettering
2014-06-10man: updates to the passive target sectionLennart Poettering
2014-06-10man: Searching for an explanation of what a "slice unit" was, found this, ↵Mark Eichin
felt compelled to send in fixes for the obvious typos
2014-06-09man: clarify the effect of replace-irreversibly on future conflicting jobsDavid Strauss
2014-06-06man: fix references to sd_journal_cutoff_realtime_usecMantas Mikulėnas