summaryrefslogtreecommitdiff
path: root/man
AgeCommit message (Collapse)Author
2014-07-25networkd: ipv4ll - default to setting up ipv4ll routesTom Gundersen
This is necessary for non-ipv4ll hosts to communicate with ipv4ll-only hosts on the same link. Defaults to being enabled, but can be opted out. See: <http://avahi.org/wiki/AvahiAutoipd#Routes>
2014-07-23man: fix path for system-sleep hook directoryMichael Biebl
2014-07-23docs: remove repeating words from man/*xmlKarel Zak
2014-07-21man: merge systemd-verify with systemd-analyzeZbigniew Jędrzejewski-Szmek
2014-07-21networkd: add support for bond optionsSusant Sahani
The following bond options are supported by this patch. MIIMonitorSec: Specifies the frequency in milli-seconds that MII link monitoring will occur. UpDelaySec: Specifies the delay time in milli-seconds to enable a link after a link up status has been detected. DownDelaySec: Specifies the delay time in milli-seconds to disable a link after a link failure has been detected. changes: 1. Added gconf variables. 2. man page conf: [NetDev] Name=bond1 Kind=bond [Bond] Mode=802.3ad TransmitHashPolicy=layer2+3 LacpduTransmitRate=fast MIIMonitorSec=1s UpDelaySec=2s DownDelaySec=8s cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2+3 (2) MII Status: up MII Polling Interval (ms): 1000 Up Delay (ms): 2000 Down Delay (ms): 8000 802.3ad info LACP rate: fast Min links: 0 Aggregator selection policy (ad_select): stable bond bond1 has no active aggregator [tomegun: rephrased manpage, dropped bond_ prefix from variables]
2014-07-21networkd: bond add support for lacp rateSusant Sahani
LacpduTransmitRate option specifies the rate in which link partner to transmit LACPDU packets in 802.3ad mode. Possible values slow : Request partner to transmit LACPDUs every 30 seconds fast : Request partner to transmit LACPDUs every 1 second The default is slow. chages: 1. Added enum bond_lacp_rate_table 2. gperf LacpduTransmitRate Test: conf file: [NetDev] Name=bond1 Kind=bond [Bond] Mode=802.3ad LacpduTransmitRate=fast test: cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2+3 (2) MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 802.3ad info LACP rate: fast Min links: 0 Aggregator selection policy (ad_select): stable bond bond1 has no active aggregator [tomegun: renamed from LacpduTransmitRate to LACPTransmitRate, manpage fixes and dropped bond_ prefix from variables]
2014-07-21networkd: add support for bond transmit hash policySusant Sahani
This patch adds support the transmit hash policy to use for slave selection in balance-xor, 802.3ad, and tlb modes layer2, layer3+4, layer2+3, encap3+4, encap3+4 Added: 1. BondXmitHashPolicy 2. conf param TransmitHashPolicy Test conf: [NetDev] Name=bond1 Kind=bond [Bond] Mode=802.3ad TransmitHashPolicy=layer2+3 test output: cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2+3 (2) MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 802.3ad info LACP rate: slow Min links: 0 Aggregator selection policy (ad_select): stable bond bond1 has no active aggregator [tomegun: dropped bond_ prefix from new Bond variable, drop repeated man-page section]
2014-07-20man: add systemd-verify(1)Zbigniew Jędrzejewski-Szmek
2014-07-20path-lookup: make SYSTEMD_UNIT_PATH more flexibleZbigniew Jędrzejewski-Szmek
It can now contain more than one directory, and can be used to only prepend, not totally override, the normal load path.
2014-07-19journalctl,man: allow + only between termsZbigniew Jędrzejewski-Szmek
https://bugzilla.redhat.com/show_bug.cgi?id=1110712
2014-07-18man,journal: add note about sd_journal_get_cutoff_monotonic_usec return valueZbigniew Jędrzejewski-Szmek
Also modify the function itself to be a bit simpler to read.
2014-07-18systemd-detect-virt: detect s390 virtualizationThomas Blume
A system that is running on a logical partition (LPAR) provided by PR/SM has access to physical hardware (except CPU). It is true that PR/SM abstracts the hardware, but only for sharing purposes. Details are statet at: http://publib.boulder.ibm.com/infocenter/eserver/v1r2/topic/eicaz/eicazzlpar.htm -->-- In other words, PR/SM transforms physical resources into virtual resources so that many logical partitions can share the same physical resources. --<-- Still, from the OS point of view, the shared virtual resource is real hardware. ConditionVirtualization must be set to false if the OS runs directly on PR/SM (e.g. in an LPAR). [zj: reorder code so that variables are not allocated when #if-def is false. Add commit message.]
2014-07-16man: document yearly and annually in systemd.time(7)Zbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=81158
2014-07-15man: describe new filename rules for journal-remoteZbigniew Jędrzejewski-Szmek
2014-07-15man: document systemd-journal-uploadZbigniew Jędrzejewski-Szmek
2014-07-15journal-remote: allow splitting incoming logs by source hostZbigniew Jędrzejewski-Szmek
Previously existing scheme where the file name would be based on the source was just too ugly and unpredicatable. Now there are only two options: 1. just one file (until rotation), 2. one file per source host, using the hostname as filename part. For the cases where the source is specified by the user, only option one is allowed, and the full of the file must be specified.
2014-07-15sd-dhcp-client: make request broadcasts opt-inTom Gundersen
It appears there is no good way to decide whether or not broadcasts should be enabled, there is hardware that must have broadcast, and there are networks that only allow unicast. So we give up and make this configurable. By default, unicast is used, but if the kernel were to inform us abotu certain interfaces requiring broadcast, we could change this to opt-in by default in those cases.
2014-07-14man: systemd.netdev - make it clear that we do not touch preexisting netdevsTom Gundersen
We will happily use bridges/bonds as master devices, but we will not change their settings if they were created by someone else.
2014-07-14networkd: dhcp add vendor class indentifier option 60Susant Sahani
Vendor Class Identifier be used by DHCP clients to identify their vendor type and configuration. When using this option, vendors can define their own specific identifier values, such as to convey a particular hardware or operating system configuration or other identifying information. Vendor-specified DHCP options—features that let administrators assign separate options to clients with similar configuration requirements. For example, if DHCP-aware clients for example we want to separate different gateway and option for different set of people (dev/test/hr/finance) in a org or devices for example web/database servers or let's say in a embedded device etc and require a different default gateway or DNS server than the rest of clients.
2014-07-14networkd: make metric of routes configurableSusant Sahani
Now route metric can be configuted via conf file: example conf: [Match] Name=em1 [Route] Gateway=192.168.1.12 Metric=10 Test: ip route output default via 192.168.1.12 dev em1 metric 10 [tomegun: squash TODO update and reword man page a bit]
2014-07-13man: mention XDG_DATA_HOME in systemd.unitTanu Kaskinen
2014-07-13man: sysusers.d correct default user shellSjoerd Simons
For the non-root user sysusers uses nologin as the default shell, not login. Correct the documentation to match the code.
2014-07-13man: add systemd-coredump(8) and a bunch of linksZbigniew Jędrzejewski-Szmek
2014-07-11hostnamed: introduce new location machin-info field, tooLennart Poettering
2014-07-11journald: turn ForwardToSyslog= off by defaultLennart Poettering
After all, rsyslog and friends nowadays read their data directly from the journal, hence the forwarding is unnecessary in most cases.
2014-07-11Add DEPLOYMENT to hostnamectlJóhann B. Guðmundsson
[zj: remove the check against a fixed list of environments.]
2014-07-11shell-completion,man: beef up chassis completions and descriptionZbigniew Jędrzejewski-Szmek
Parameters to hostnamectl command are not optional and should not be marked as such in the man page.
2014-07-10man: document x-systemd.device-timeout for crypttabZbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=54210
2014-07-10man: proper link for dmesgZbigniew Jędrzejewski-Szmek
2014-07-10sysusers: allow overrides in /etc and /runZbigniew Jędrzejewski-Szmek
An administrator might want to block a certain sysusers config file from being executed, e.g. to block the creation of a certain user. Only a relatively short description is added in the man page, since overrides should be relatively rare.
2014-07-09sysusers: don't allow user names longer than UT_NAMESIZELennart Poettering
As pointed out by Miloslav Trmač it might be a good idea to make sure that usernames stay with in the utmp-defined limits.
2014-07-09hostnamed: update documentation with new "watch" chassis typeTomasz Torcz
2014-07-07man: add a mapping for external manpagesZbigniew Jędrzejewski-Szmek
It is annoying when we have dead links on fd.o. Add project='man-pages|die-net|archlinux' to <citerefentry>-ies. In generated html, add external links to http://man7.org/linux/man-pages/man, http://linux.die.net/man/, https://www.archlinux.org/. By default, pages in sections 2 and 4 go to man7, since Michael Kerrisk is the autorative source on kernel related stuff. The rest of links goes to linux.die.net, because they have the manpages. Except for the pacman stuff, since it seems to be only available from archlinux.org. Poor gummiboot gets no link, because gummitboot(8) ain't to be found on the net. According to common wisdom, that would mean that it does not exist. But I have seen Kay using it, so I know it does, and deserves to be found. Can somebody be nice and put it up somewhere?
2014-07-07man: document systemd-escape(1)Lennart Poettering
2014-07-07networkd: add support for modeSusant Sahani
This patch adds supports networkd to configure bond mode during creation via persistent conf. Mode can be configured with conf param 'Mode'. A new section Bond is added to the conf to support bond mode. These modes can be configured now. balance-rr active-backup balance-xor broadcast 802.3ad balance-tlb balance-alb Example conf file: test-bond.conf [NetDev] Name=bond1 Kind=bond [Bond] Mode=balance-xor Test case: 1. start networkd service: 12: bond1: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 22:89:6c:47:23:d2 brd ff:ff:ff:ff:ff:ff 2. find bond mode: cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: load balancing (xor) Transmit Hash Policy: layer2 (0) MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 Changes: 1. Added file networkd-bond.c 2. Bond mode enum BondMode 3. conf section [Bond] [tomegun: whitespace]
2014-07-07firstboot: get rid of firstboot generator again, introduce ↵Lennart Poettering
ConditionFirstBoot= instead As Zbigniew pointed out a new ConditionFirstBoot= appears like the nicer way to hook in systemd-firstboot.service on first boots (those with /etc unpopulated), so let's do this, and get rid of the generator again.
2014-07-07man: document systemd-firstboot(1)Lennart Poettering
2014-07-07man: drop references to the --priviliged command line option which has been ↵Lennart Poettering
removed a while back
2014-07-07man: chroot jails are no longer detected by ConditionVirtualization=Lennart Poettering
2014-07-07man: add missing archs to ConditionArchitecture= descriptionLennart Poettering
2014-07-07man: network - document Peer keyTom Gundersen
2014-07-04man: document nspawn's new --volatile switchLennart Poettering
2014-07-04man: netdev - mention tun and tapTom Gundersen
Reported by Moviuro <moviuro@gmail.com>
2014-07-03man: add link to Open Group Base SpecificationsZbigniew Jędrzejewski-Szmek
2014-07-03man: document that systemctl's -H may now be used to connect directly to a ↵Lennart Poettering
container on a remote host
2014-07-03sysusers: add new line type "m" to add users as members to groupsLennart Poettering
2014-07-03man: reference RestartForceExitStatus= from the Restart= descriptionLennart Poettering
2014-07-03core: introduce new RestartForceExitStatus= service settingLennart Poettering
This does the inverse of RestartPreventExitStatus=: it forces a restart of a service when a certain exit status is returned by a service process.
2014-07-03networkd: tuntap - default to no packet informationTom Gundersen
Susant says: > ip tuntap turns this off by default. Let's follow ip(8) here as that should be the least surprising.
2014-07-03networkd: tuntap - manpage fixesTom Gundersen