| Age | Commit message (Collapse) | Author |
|---|
|
|
|
- Show example of all `systemctl status` output and documents what possible
"Loaded:", "Active" and "Enabled" values mean.
- Documents what different colors of the dot mean.
- Documents "gotcha" with load-on-demand behavior which will report units as
"loaded" even if they are only loaded to show their status.
(From @poettering: https://github.com/systemd/systemd/issues/5063#issuecomment-272115024 )
|
|
Small fixes and enhancements to docs and code
|
|
|
|
|
|
When a user is trying to understand what is going on with a restart action, it is useful to explicitly describe how the action is run. It may seem obvious, but it is helpful to be explicit so one knows there isn't a special ExecRestart= or similar option that they could be looking at.
|
|
Loosely inspired by https://bugzilla.redhat.com/show_bug.cgi?id=1411134.
|
|
Add AF_VSOCK socket activation support
|
|
Accept AF_VSOCK listen addresses in socket unit files. Both guest and
host can now take advantage of socket activation.
The QEMU guest agent has recently been modified to support socket
activation and can run over AF_VSOCK with this patch.
|
|
|
|
|
|
|
|
|
|
automatically clean up PrivateTmp= left-overs in /var/tmp on next boot
|
|
PAMName= (#4967)
A follow-up for #4942, adding a brief but more correct explanation of
the processes.
|
|
systemd-tmpfiles-setup.service
Preparation for fixing #4401.
|
|
shell" does not
This adds a brief explanation, suggesting the use of "systemd-run -M" to
acquire exit status/code information for the invoked process.
My original plan was to propagate the exit code/status in "machinectl
shell" too, but this would mean we'd have to actively watch the shell's
runtime status, and thus would need full, highly privileged and
continious access to the container's system manager, the way
"systemd-run" does it. This would be quite a departure from the
simplistic, low-priviliged OpenShell() bus call implementation of the
current code, that really just acquires a PTY device with a shell
connected.
Moreover it would blur the lines between the two commands even further,
which I think is not desirable. Hence, from now on:
"machinectl shell" is the full-session, interactive shell for human
users
"systemd-run -M …" is the low-level tool, that supports
on-interactive mode, and is more configurable and suitable for
streaming.
Fixes: #4215
|
|
|
|
The manpage claimed that ExecStop would be followed immediately by
SIGKILL, whereas the actual behavior is to go through KillMode= and
KillSignal= first.
Fixes #4490
|
|
Fixes: #4914
|
|
Rename the arp proxy option to IPv4ProxyARP= in order to clarify
its relationship to IPv4, and map to the various IPv6 options we have.
Fixes: #4768
|
|
Fix wrong condition test in manager_etc_hosts_lookup(), which caused it to
return an IPv4 answer when an IPv6 question was asked, and vice versa.
Also only return success if we actually found any A or AAAA record.
In systemd-resolved.service(8), point out that /etc/hosts mappings only
affect address-type lookups, not other types.
The test case currently disables DNSSEC in resolved, as there is a bug
where "-t MX" fails due to "DNSSEC validation failed" even after
"downgrading to non-DNSSEC mode". This should be dropped once that bug
gets fixed.
Fixes #4801
|
|
active_slave:
Specifies the new active slave for modes that support it
(active-backup, balance-alb and balance-tlb).
primary slave:
systemd-networks currently lacks the capability to set the primary slave
in an
active-backup bonding. This is necessary if you prefer one interface
over the
other. A common example is a eth0-wlan0 bonding on a laptop where you'd
want to
switch to the wired connection whenever it's available.
Fixes: #2837
|
|
Fixes: #4521
|
|
Fixes: #4928
|
|
|
|
This adds a generator and a small service that will look for "roothash="
on the kernel command line and use it for setting up a very partition
for the root device.
This provides similar functionality to nspawn's existing --roothash=
switch.
|
|
This adds support for a new kernel command line option "systemd.volatile=" that
provides the same functionality that systemd-nspawn's --volatile= switch
provides, but for host systems (i.e. systems booting with a kernel).
It takes the same parameter and has the same effect.
In order to implement systemd.volatile=yes a new service
systemd-volatile-root.service is introduced that only runs in the initrd and
rearranges the root directory as needed to become a tmpfs instance. Note that
systemd.volatile=state is implemented different: it simply generates a
var.mount unit file that is part of the normal boot and has no effect on the
initrd execution.
The way this is implemented ensures that other explicit configuration for /var
can always override the effect of these options. Specifically, the var.mount
unit is generated in the "late" generator directory, so that it only is in
effect if nothing else overrides it.
|
|
This improves kernel command line parsing in a number of ways:
a) An kernel option "foo_bar=xyz" is now considered equivalent to
"foo-bar-xyz", i.e. when comparing kernel command line option names "-" and
"_" are now considered equivalent (this only applies to the option names
though, not the option values!). Most of our kernel options used "-" as word
separator in kernel command line options so far, but some used "_". With
this change, which was a source of confusion for users (well, at least of
one user: myself, I just couldn't remember that it's systemd.debug-shell,
not systemd.debug_shell). Considering both as equivalent is inspired how
modern kernel module loading normalizes all kernel module names to use
underscores now too.
b) All options previously using a dash for separating words in kernel command
line options now use an underscore instead, in all documentation and in
code. Since a) has been implemented this should not create any compatibility
problems, but normalizes our documentation and our code.
c) All kernel command line options which take booleans (or are boolean-like)
have been reworked so that "foobar" (without argument) is now equivalent to
"foobar=1" (but not "foobar=0"), thus normalizing the handling of our
boolean arguments. Specifically this means systemd.debug-shell and
systemd_debug_shell=1 are now entirely equivalent.
d) All kernel command line options which take an argument, and where no
argument is specified will now result in a log message. e.g. passing just
"systemd.unit" will no result in a complain that it needs an argument. This
is implemented in the proc_cmdline_missing_value() function.
e) There's now a call proc_cmdline_get_bool() similar to proc_cmdline_get_key()
that parses booleans (following the logic explained in c).
f) The proc_cmdline_parse() call's boolean argument has been replaced by a new
flags argument that takes a common set of bits with proc_cmdline_get_key().
g) All kernel command line APIs now begin with the same "proc_cmdline_" prefix.
h) There are now tests for much of this. Yay!
|
|
Fixes: #4768
|
|
If booting with systemd.firstboot=0 the wizard will be skipped.
|
|
Make it easier to figure out how to use the journalctl export format.
|
|
calendarspec: allow repetition values with ranges
|
|
Various smaller fixes
|
|
"Every other hour from 9 until 5" can be written as
`9..17/2:00` instead of `9,11,13,15,17:00`
|
|
(#4515)
Since commit 9d06297, mount units from mountinfo are not bound to their devices
anymore (they use the "Requires" dependency instead).
This has the following drawback: if a media is mounted and the eject button is
pressed then the media is unconditionally ejected leaving some inconsistent
states.
Since udev is the component that is reacting (no matter if the device is used
or not) to the eject button, users expect that udev at least try to unmount the
media properly.
This patch introduces a new property "SYSTEMD_MOUNT_DEVICE_BOUND". When set on
a block device, all units that requires this device will see their "Requires"
dependency upgraded to a "BindTo" one. This is currently only used by cdrom
devices.
This patch also gives the possibility to the user to restore the previous
behavior that is bind a mount unit to a device. This is achieved by passing the
"x-systemd.device-bound" option to mount(8). Please note that currently this is
not working because libmount treats the x-* options has comments therefore
they're not available in utab for later application retrievals.
|
|
Fixes: #4654
|
|
When sd_journal_perror() was added some footers weren't updated accordingly.
Let's do so.
Fixes: #4755
|
|
Fixes #1188.
|
|
This adds two new settings BindPaths= and BindReadOnlyPaths=. They allow
defining arbitrary bind mounts specific to particular services. This is
particularly useful for services with RootDirectory= set as this permits making
specific bits of the host directory available to chrooted services.
The two new settings follow the concepts nspawn already possess in --bind= and
--bind-ro=, as well as the .nspawn settings Bind= and BindReadOnly= (and these
latter options should probably be renamed to BindPaths= and BindReadOnlyPaths=
too).
Fixes: #3439
|
|
Udev property ordering
|
|
|
|
As requested in
https://github.com/systemd/systemd/pull/4864#pullrequestreview-12372557.
docbook will substitute triple dots for the ellipsis in man output, so this has
no effect on the troff output, only on HTML, making it infinitesimally nicer.
In some places we show output from programs, which use dots, and those places
should not be changed. In some tables, the alignment would change if dots were
changed to the ellipsis which is only one character. Since docbook replaces the
ellipsis automatically, we should leave those be. This patch changes all other
places.
|
|
Networkd man page update and fixes for the fallout
|
|
Our warning message was misleading, because we wouldn't "correct" anything,
we'd just ignore unkown escapes. Update the message.
Also, print just the extracted word (which contains the offending sequences) in
the message, instead of the whole line.
Fixes #4697.
|
|
Various specifier resolution fixes.
|
|
Generalize image dissection logic of nspawn, and make it useful for other tools.
|
|
We shouldn't just have snippets of configuration, but instead
examples which show all the parts necessary to build a certain kind
of setup, with short explanations.
|
|
Add new "khash" API and add new sd_id128_get_machine_app_specific() function
|
|
Go through stop_post on failure (#4770)
|
