| Age | Commit message (Collapse) | Author |
|---|
|
Adds is-failed to join is-active and is-enabled.
I grabbed this one from the todo list. Most of the functionality was
already there for is-active. I just needed to make check_one_unit take
the states to check for as an argument instead of the hardcoded
"active" and "reloading".
is-failed will return 1 if none of the units given are failed. This is
different from is-active which will return 3 if none of the units
given are active. It returns 3 with this comment:
/* According to LSB: "program is not running" */
As that does not make sense when looking for failed units I simply
chose 1 instead.
|
|
There is no parameter named luks.fstab.
|
|
|
|
|
|
|
|
For many usecases it is useful to store the chassis type somewhere, and
/etc/machine-info sounds like a good place. Ideally we could always
detect the chassis type from firmware, but frequently that's not
available and in many embedded devices probably entirely unrealistic.
This patch adds a configurable setting CHASSIS= to /etc/machine-info and
exposes this via hostnamectl/hostnamed. hostnamed will guess the chassis
type from DMI if nothing is set explicitly. I also added support for
detecting it from ACPI, which should be more useful as ACPI 5.0 actually
knows a "tablet" chassis type, which neither DMI nor previous ACPI
versions knew.
This also enables DMI-based and ACPI-based detection for non-x86 systems
as ACPI is apparently coming to ARM platforms soon.
I tried to minimize the vocabulary of chassis types understood and
added: desktop, laptop, server, tablet, handset. This is much less than
either APCI or DMI know. If we need more types later on we can easily
add them.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This saves test output to individual .log files.
The driver is only used in /Makefile.am, not in
/docs/*udev/Makefile.am because the latter don't seem to work with
this driver. They don't produce much output anyway.
.gitignore is alphabetized, and .log files are added to it.
Generated files from /build-aux are removed from the list.
|
|
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=880552
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This introduces a new data threshold setting for sd_journal objects
which controls the maximum size of objects to decompress. This is
relieves the library from having to decompress full data objects even
if a client program is only interested in the initial part of them.
This speeds up "systemd-coredumpctl" drastically when invoked without
parameters.
|
|
|
|
|
|
Sometimes it is better to see messages in full, and the existing
set of options didn't allow this easily. E.g. now
journalctl -f --full
will behave like
tail -f /var/log/messages
of yore.
Long option only for now, since small letters are becoming
scarce, and this doesn't feel like a capital-letter-option.
'-u' would be nice, and the above command would be spelled
journalctl -fu
|
|
> Kay:
udev is early boot without /var. /var is entirely taboo for udev.
This partially reverts commit ee623f0d0c04a9c8da4953ddc29862c8c4945458
(moving hwdb.bin is reverted, but the uninstall hook and cosmetic
changes remain).
|
|
It's not configuration, so it doesn't belong in udev.
Also, remove the catalog when uninstalling udev.
|
|
|
|
The message catalog can be used to attach short help texts to log lines,
keyed by their MESSAGE_ID= fields. This is useful to help the
administrator understand the context and cause of a message, find
possible solutions and find further related documentation.
Since this is keyed off MESSAGE_ID= this will only work for native
journal messages.
The message catalog supports i18n, and is useful to augment english
language system messages with explanations in the local language.
This commit only includes short explanatory messages for a few example
message IDs, we'll add more complete documentation for the relevant
systemd messages later on.
|
|
A service that only sets the scheduling policy to round-robin
fails to be started. This is because the cpu_sched_priority is
initialized to 0 and is not adjusted when the policy is changed.
Clamp the cpu_sched_priority when the scheduler policy is set. Use
the current policy to validate the new priority.
Change the manual page to state that the given range only applies
to the real-time scheduling policies.
Add a testcase that verifies this change:
$ make test-sched-prio; ./test-sched-prio
[test/sched_idle_bad.service:6] CPU scheduling priority is out of range, ignoring: 1
[test/sched_rr_bad.service:7] CPU scheduling priority is out of range, ignoring: 0
[test/sched_rr_bad.service:8] CPU scheduling priority is out of range, ignoring: 100
|
|
Semicolon separated lines are supported for all those commands,
and semicolons can now be escaped.
|
|
|
|
The list of types and load states if lengthy, so a little reminder
can be sometimes useful.
|
|
timedatectl is too cool not to advertise it a bit.
|
|
|
|
|
|
|
|
This was never intended to be pushed.
This reverts commit aea54018a5e66a41318afb6c6be745b6aef48d9e.
|
|
Since we already allow defining the mode of AF_UNIX sockets and FIFO, it
makes sense to also allow specific user/group ownership of the socket
file for restricting access.
|
|
|
|
Fixes a few more typos. Also changes a "Accept=no" to
"Accept=false" to be consistent with the previous examples
in the same man page.
|
|
specific
This was premarily intended to support the LSB facility $httpd which is
only known by Fedora, and a bad idea since it lacks any real-life
usecase.
Similar, drop support for some other old Fedora-specific facilities.
Also, document the rules for introduction of new facilities, to clarify
the situation for the future.
|
|
|
|
|
|
Useful for completion generation.
|
|
Useful for completion generation.
|
|
This adds SMACK label configuration options to socket units.
SMACK labels should be applied to most objects on disk well before
execution time, but two items remain that are generated dynamically
at run time that require SMACK labels to be set in order to enforce
MAC on all objects.
Files on disk can be labelled using package management.
For device nodes, simple udev rules are sufficient to add SMACK labels
at boot/insertion time.
Sockets can be created at run time and systemd does just that for
several services. In order to protect FIFO's and UNIX domain sockets,
we must instruct systemd to apply SMACK labels at runtime.
This patch adds the following options:
Smack - applicable to FIFO's.
SmackIpIn/SmackIpOut - applicable to sockets.
No external dependencies are required to support SMACK, as setting
the labels is done using fsetxattr(). The labels can be set on a
kernel that does not have SMACK enabled either, so there is no need
to #ifdef any of this code out.
For more information about SMACK, please see Documentation/Smack.txt
in the kernel source code.
v3 of this patch changes the config options to be CamelCased.
|
|
|
|
|
|
|
