| Age | Commit message (Collapse) | Author |
|---|
|
|
|
When many services are running, it was difficult to see only the interesting ones.
This patch allows to show only the subtree of interest.
|
|
New exec boolean MemoryDenyWriteExecute, when set, installs
a seccomp filter to reject mmap(2) with PAGE_WRITE|PAGE_EXEC
and mprotect(2) with PAGE_EXEC.
|
|
Recently added cgroup unified hierarchy support uses "max" in configurations
for no upper limit. While consistent with what the kernel uses for no upper
limit, it is inconsistent with what systemd uses for other controllers such as
memory or pids. There's no point in introducing another term. Update cgroup
unified hierarchy support so that "infinity" is the only term that systemd
uses for no upper limit.
|
|
Implement sets of system calls to help constructing system call
filters. A set starts with '@' to distinguish from a system call.
Closes: #3053, #3157
|
|
As suggested in
https://github.com/systemd/systemd/issues/3282#issuecomment-220264509
|
|
This patch implements support for IFLA_BR_VLAN_FILTERING configuration.
|
|
Definitions of ReadWriteDirectories=, ReadOnlyDirectories=, InaccessibleDirectories=,
WorkingDirectory=, and RootDirecory= were not clear. This patch specifies when
they are relative to the host's root directory and when they are relative to the service's
root directory.
Fixes #3248
|
|
|
|
|
|
Fixes #3376.
|
|
On the unified hierarchy, memory controller implements three control knobs -
low, high and max which enables more useable and versatile control over memory
usage. This patch implements support for the three control knobs.
* MemoryLow, MemoryHigh and MemoryMax are added for memory.low, memory.high and
memory.max, respectively.
* As all absolute limits on the unified hierarchy use "max" for no limit, make
memory limit parse functions accept "max" in addition to "infinity" and
document "max" for the new knobs.
* Implement compatibility translation between MemoryMax and MemoryLimit.
v2:
- Fixed missing else's in config_parse_memory_limit().
- Fixed missing newline when writing out drop-ins.
- Coding style updates to use "val > 0" instead of "val".
- Minor updates to documentation.
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=1338584
|
|
Implement compat translation between IO* and BlockIO* settings
|
|
minor improvements for dealing with MAC Addresses
|
|
The sync() call on shutdown had been removed with commit 57371e5829a61e5ee6c9f98404dfc729d6c62608
together with the no-sync option for the shutdown commands.
The sync call was restored in commit 4a3ad39957399c4a30fc472a804e72907ecaa4f9 but the no-sync option
wasn't re-added.
I think we should restore this option at least for the legacy halt command.
|
|
Due to the substantial interface changes in cgroup unified hierarchy, new IO
settings are introduced. Currently, IO settings apply only to unified
hierarchy and BlockIO to legacy. While the transition is necessary, it's
painful for users to have to provide configs for both. This patch implements
translation from one config set to another for configs which make sense.
* The translation takes place during application of the configs. Users won't
see IO or BlockIO settings appearing without being explicitly created.
* The translation takes place only if there is no config for the matching
cgroup hierarchy type at all.
While this doesn't provide comprehensive compatibility, it should considerably
ease transition to the new IO settings which are a superset of BlockIO
settings.
v2:
- Update test-cgroup-mask.c so that it accounts for the fact that
CGROUP_MASK_IO and CGROUP_MASK_BLKIO move together. Also, test/parent.slice
now sets IOWeight instead of BlockIOWeight.
|
|
cgroup IO controller supports maximum limits for both bandwidth and IOPS but
systemd resource control currently only supports bandwidth limits. This patch
adds support for IOReadIOPSMax and IOWriteIOPSMax when unified cgroup hierarchy
is in use.
It isn't difficult to also add BlockIOReadIOPS and BlockIOWriteIOPS for legacy
hierarchies but IO control on legacy hierarchies is half-broken anyway, so
let's leave it alone for now.
|
|
|
|
Add an option to disable appending DHCP option 3 (Router) to the DHCP
OFFER and ACK packets.
This commit adds the boolean option EmitRouter= for the [DHCPServer]
section in .network files.
Rationale: On embedded devices, it is very useful to have a DHCP server
running on an USB OTG ethernet gadget interface to avoid manual setup on
the client PCs, but it should only serve IP addresses, no route(r)s.
Otherwise, Windows clients experience network connectivity issues, due
to them using the address set in DHCP option 3 as default gateway.
Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
|
|
Improve the networkd documentation to clarify that Match.MACAddress is for
selection, but Link.MACAddress describes an action to be taken.
|
|
BlockIOXyz= to the legacy hierarchy
With this change for each setting we say which hierarachy it applies to briefly
in the first sentence of the description, plus in longer form in an extra
pargraph at the end, with a recommendation for the counterpart of the option in
the other hierarchy.
Also adds markup and the "=" suffix to all mentioned settings.
|
|
core: add io controller support on the unified hierarchy
|
|
Private /dev will not be managed by udev or others, so we can make it
noexec and readonly after we have made all device nodes. As /dev/shm
needs to be writable, we can't use bind_remount_recursive().
|
|
|
|
|
|
This patch implements support for the IFLA_BR_MCAST_SNOOPING attribute
it can change the multicast snooping value.
IGMP snooping monitors the Internet Group Management Protocol (IGMP)
traffic between hosts and multicast routers.
|
|
Add a synchronization point so that custom initramfs units can run
after the root device becomes available, before it is fsck'd and
mounted.
This is useful for custom initramfs units that may modify the
root disk partition table, where the root device is not known in
advance (it's dynamically selected by the generators).
|
|
The nfs mount option bg will not be supported with systemd.
Reasons are discussed here:
https://github.com/systemd/systemd/pull/3169
|
|
This allows selecting the propagation level of emitted LLDP packets
(specifically: the destination MAC address of the packets). This is useful
because it allows generating LLDP packets that optionally cross certain types
of bridges.
See 802.11ab-2009, Table 7-1 for details.
|
|
|
|
networkd
|
|
|
|
Make the XML validate again.
|
|
It's only relevant to DHCP, and it should be where the DUID is configured too.
|
|
|
|
For similar reasons as the recent addition of a limit on sessions.
Note that we don't enforce a limit on inhibitors per-user currently, but
there's an implicit one, since each inhibitor takes up one fd, and fds are
limited via RLIMIT_NOFILE, and the limit on the number of processes per user.
|
|
We really should put limits on all resources we manage, hence add one to the
number of concurrent sessions, too. This was previously unbounded, hence set a
relatively high limit of 8K by default.
Note that most PAM setups will actually invoke pam_systemd prefixed with "-",
so that the return code of pam_systemd is ignored, and the login attempt
succeeds anyway. On systems like this the session will be created but is not
tracked by systemd.
|
|
On the unified hierarchy, blkio controller is renamed to io and the interface
is changed significantly.
* blkio.weight and blkio.weight_device are consolidated into io.weight which
uses the standardized weight range [1, 10000] with 100 as the default value.
* blkio.throttle.{read|write}_{bps|iops}_device are consolidated into io.max.
Expansion of throttling features is being worked on to support
work-conserving absolute limits (io.low and io.high).
* All stats are consolidated into io.stats.
This patchset adds support for the new interface. As the interface has been
revamped and new features are expected to be added, it seems best to treat it
as a separate controller rather than trying to expand the blkio settings
although we might add automatic translation if only blkio settings are
specified.
* io.weight handling is mostly identical to blkio.weight[_device] handling
except that the weight range is different.
* Both read and write bandwidth settings are consolidated into
CGroupIODeviceLimit which describes all limits applicable to the device.
This makes it less painful to add new limits.
* "max" can be used to specify the maximum limit which is equivalent to no
config for max limits and treated as such. If a given CGroupIODeviceLimit
doesn't contain any non-default configs, the config struct is discarded once
the no limit config is applied to cgroup.
* lookup_blkio_device() is renamed to lookup_block_device().
Signed-off-by: Tejun Heo <htejun@fb.com>
|
|
Let's lower the default values a bit, and pick different defaults for
Accept=yes and Accept=no sockets.
Fixes: #3167
|
|
Rework DUID setting
|
|
make virtualization detection quieter, rework unit start limit logic, detect unit file drop-in changes correctly, fix autofs state propagation
|
|
Closes #2166.
We only allow 0, infinity and forever.
infinity and forever is same.
|
|
networkd: add support to set route table
|
|
networkd: add support to set route table
1. add support to configure the table id.
if id is less than 256 we can fit this in the header of route as
netlink property is a char. But in kernel this proepty is a
unsigned 32. Hence if greater that 256 add this as RTA_TABLE
attribute.
2. we are not setting the address family now. Now set this property.
|
|
This is essentially a revert of f38e0cce75ff2ffbd99f7e382ed39c160bb7d799 (which
removed the documentation of DUIDType on purpose). The description is heavily
updated for the new semantics.
This addresses #3127 § 4.
|
|
|
|
[/etc/systemd/system/test.socket:2] Unknown lvalue 'TriggerLimitIntervalBurst' in section 'Socket'
Follow-up for 8b26cdbd2a94
|
|
machined: make "clone" asynchronous, and support copy-based fall-back
|
|
Let's move the enforcement of the per-unit start limit from unit.c into the
type-specific files again. For unit types that know a concept of "result" codes
this allows us to hook up the start limit condition to it with an explicit
result code. Also, this makes sure that the state checks in clal like
service_start() may be done before the start limit is checked, as the start
limit really should be checked last, right before everything has been verified
to be in order.
The generic start limit logic is left in unit.c, but the invocation of it is
moved into the per-type files, in the various xyz_start() functions, so that
they may place the check at the right location.
Note that this change drops the enforcement entirely from device, slice, target
and scope units, since these unit types generally may not fail activation, or
may only be activated a single time. This is also documented now.
Note that restores the "start-limit-hit" result code that existed before
6bf0f408e4833152197fb38fb10a9989c89f3a59 already in the service code. However,
it's not introduced for all units that have a result code concept.
Fixes #3166.
|
