summaryrefslogtreecommitdiff
path: root/man
AgeCommit message (Collapse)Author
2016-06-07Merge pull request #3394 from poettering/triple-tstampLennart Poettering
timestamping improvements and IPv6 RA revamp
2016-06-06os-release: Add VERSION_CODENAME field (#3445)Benjamin Drung
Debian and their derivatives (Ubuntu, Trisquel, etc.) use a code name for their repositories. Thus record the code name in os-release for processing. Closes systemd/systemd#3429
2016-06-06network: beef up ipv6 RA support considerablyLennart Poettering
This reworks sd-ndisc and networkd substantially to support IPv6 RA much more comprehensively. Since the API is extended quite a bit networkd has been ported over too, and the patch is not as straight-forward as one could wish. The rework includes: - Support for DNSSL, RDNSS and RA routing options in sd-ndisc and networkd. Two new configuration options have been added to networkd to make this configurable. - sd-ndisc now exposes an sd_ndisc_router object that encapsulates a full RA message, and has direct, friendly acessor functions for the singleton RA properties, as well as an iterative interface to iterate through known and unsupported options. The router object may either be retrieved from the wire, or generated from raw data. In many ways the sd-ndisc API now matches the sd-lldp API, except that no implicit database of seen data is kept. (Note that sd-ndisc actually had a half-written, but unused implementaiton of such a store, which is removed now.) - sd-ndisc will now collect the reception timestamps of RA, which is useful to make sd_ndisc_router fully descriptive of what it covers. Fixes: #1079
2016-06-06machinectl: Added stop as alias for poweroff (#3406)Christian Rebischke
2016-06-05cgtop: add option to show a single cgroup subtree (#3413)Alessandro Puccetti
When many services are running, it was difficult to see only the interesting ones. This patch allows to show only the subtree of interest.
2016-06-03core: Restrict mmap and mprotect with PAGE_WRITE|PAGE_EXEC (#3319) (#3379)Topi Miettinen
New exec boolean MemoryDenyWriteExecute, when set, installs a seccomp filter to reject mmap(2) with PAGE_WRITE|PAGE_EXEC and mprotect(2) with PAGE_EXEC.
2016-06-03core: always use "infinity" for no upper limit instead of "max" (#3417)Tejun Heo
Recently added cgroup unified hierarchy support uses "max" in configurations for no upper limit. While consistent with what the kernel uses for no upper limit, it is inconsistent with what systemd uses for other controllers such as memory or pids. There's no point in introducing another term. Update cgroup unified hierarchy support so that "infinity" is the only term that systemd uses for no upper limit.
2016-06-01core: add pre-defined syscall groups to SystemCallFilter= (#3053) (#3157)Topi Miettinen
Implement sets of system calls to help constructing system call filters. A set starts with '@' to distinguish from a system call. Closes: #3053, #3157
2016-05-31man: document that systemctl -ff reboot does not require PID 1 to work (#3310)Lennart Poettering
As suggested in https://github.com/systemd/systemd/issues/3282#issuecomment-220264509
2016-05-30networkd: bridge add support to configure VLAN filtering (#3344)Tobias Jungel
This patch implements support for IFLA_BR_VLAN_FILTERING configuration.
2016-05-30doc: clarify systemd.exec's paths definition (#3368)Alessandro Puccetti
Definitions of ReadWriteDirectories=, ReadOnlyDirectories=, InaccessibleDirectories=, WorkingDirectory=, and RootDirecory= were not clear. This patch specifies when they are relative to the host's root directory and when they are relative to the service's root directory. Fixes #3248
2016-05-30man: fix recurring typoLuca Bruno
2016-05-28man: cite systemd.offline-updates(7) instead of linking to old wiki pageZbigniew Jędrzejewski-Szmek
2016-05-28man: punctuation fixesZbigniew Jędrzejewski-Szmek
Fixes #3376.
2016-05-27core: add cgroup memory controller support on the unified hierarchy (#3315)Tejun Heo
On the unified hierarchy, memory controller implements three control knobs - low, high and max which enables more useable and versatile control over memory usage. This patch implements support for the three control knobs. * MemoryLow, MemoryHigh and MemoryMax are added for memory.low, memory.high and memory.max, respectively. * As all absolute limits on the unified hierarchy use "max" for no limit, make memory limit parse functions accept "max" in addition to "infinity" and document "max" for the new knobs. * Implement compatibility translation between MemoryMax and MemoryLimit. v2: - Fixed missing else's in config_parse_memory_limit(). - Fixed missing newline when writing out drop-ins. - Coding style updates to use "val > 0" instead of "val". - Minor updates to documentation.
2016-05-23man: explain what list-units does a bit better (#3324)Zbigniew Jędrzejewski-Szmek
https://bugzilla.redhat.com/show_bug.cgi?id=1338584
2016-05-20Merge pull request #3290 from htejun/cgroup2-io-compatLennart Poettering
Implement compat translation between IO* and BlockIO* settings
2016-05-20Merge pull request #3235 from dkg/hwaddr-cleanupTom Gundersen
minor improvements for dealing with MAC Addresses
2016-05-19systemctl: restore the no-sync option for legacy halt (#3249)tblume
The sync() call on shutdown had been removed with commit 57371e5829a61e5ee6c9f98404dfc729d6c62608 together with the no-sync option for the shutdown commands. The sync call was restored in commit 4a3ad39957399c4a30fc472a804e72907ecaa4f9 but the no-sync option wasn't re-added. I think we should restore this option at least for the legacy halt command.
2016-05-18core: translate between IO and BlockIO settings to ease transitionTejun Heo
Due to the substantial interface changes in cgroup unified hierarchy, new IO settings are introduced. Currently, IO settings apply only to unified hierarchy and BlockIO to legacy. While the transition is necessary, it's painful for users to have to provide configs for both. This patch implements translation from one config set to another for configs which make sense. * The translation takes place during application of the configs. Users won't see IO or BlockIO settings appearing without being explicitly created. * The translation takes place only if there is no config for the matching cgroup hierarchy type at all. While this doesn't provide comprehensive compatibility, it should considerably ease transition to the new IO settings which are a superset of BlockIO settings. v2: - Update test-cgroup-mask.c so that it accounts for the fact that CGROUP_MASK_IO and CGROUP_MASK_BLKIO move together. Also, test/parent.slice now sets IOWeight instead of BlockIOWeight.
2016-05-18core: add support for IOReadIOPSMax and IOWriteIOPSMaxTejun Heo
cgroup IO controller supports maximum limits for both bandwidth and IOPS but systemd resource control currently only supports bandwidth limits. This patch adds support for IOReadIOPSMax and IOWriteIOPSMax when unified cgroup hierarchy is in use. It isn't difficult to also add BlockIOReadIOPS and BlockIOWriteIOPS for legacy hierarchies but IO control on legacy hierarchies is half-broken anyway, so let's leave it alone for now.
2016-05-17coredump: Improve man pagesPeter Mattern
2016-05-17networkd: Add EmitRouter= option for DHCP Server (#3251)Clemens Gruber
Add an option to disable appending DHCP option 3 (Router) to the DHCP OFFER and ACK packets. This commit adds the boolean option EmitRouter= for the [DHCPServer] section in .network files. Rationale: On embedded devices, it is very useful to have a DHCP server running on an USB OTG ethernet gadget interface to avoid manual setup on the client PCs, but it should only serve IP addresses, no route(r)s. Otherwise, Windows clients experience network connectivity issues, due to them using the address set in DHCP option 3 as default gateway. Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
2016-05-17man: clarify different uses of MACAddressDaniel Kahn Gillmor
Improve the networkd documentation to clarify that Match.MACAddress is for selection, but Link.MACAddress describes an action to be taken.
2016-05-16man: clarify that IOXyz= only applies to the unified hierarchy, and ↵Lennart Poettering
BlockIOXyz= to the legacy hierarchy With this change for each setting we say which hierarachy it applies to briefly in the first sentence of the description, plus in longer form in an extra pargraph at the end, with a recommendation for the counterpart of the option in the other hierarchy. Also adds markup and the "=" suffix to all mentioned settings.
2016-05-16Merge pull request #3193 from htejun/cgroup-io-controllerLennart Poettering
core: add io controller support on the unified hierarchy
2016-05-15namespace: Make private /dev noexec and readonly (#3263)topimiettinen
Private /dev will not be managed by udev or others, so we can make it noexec and readonly after we have made all device nodes. As /dev/shm needs to be writable, we can't use bind_remount_recursive().
2016-05-15/var/tmp instead of /tmp/var in systemd.unit man page (#3262)gdamjan
2016-05-15man: fix typo (#3261)Andre Klärner
2016-05-15networkd: bridge add support to configure multicast snooping (#3223)Susant Sahani
This patch implements support for the IFLA_BR_MCAST_SNOOPING attribute it can change the multicast snooping value. IGMP snooping monitors the Internet Group Management Protocol (IGMP) traffic between hosts and multicast routers.
2016-05-12Create initrd-root-device.target synchronization point (#3239)Daniel Drake
Add a synchronization point so that custom initramfs units can run after the root device becomes available, before it is fsck'd and mounted. This is useful for custom initramfs units that may modify the root disk partition table, where the root device is not known in advance (it's dynamically selected by the generators).
2016-05-10man: document the nfs mount option bg as unsupported (#3231)tblume
The nfs mount option bg will not be supported with systemd. Reasons are discussed here: https://github.com/systemd/systemd/pull/3169
2016-05-09networkd: reworkd LLDP emission to allow control of propagation levelLennart Poettering
This allows selecting the propagation level of emitted LLDP packets (specifically: the destination MAC address of the packets). This is useful because it allows generating LLDP packets that optionally cross certain types of bridges. See 802.11ab-2009, Table 7-1 for details.
2016-05-09man: add documentation for the new --network-zone= concept of nspawnLennart Poettering
2016-05-09man: document that nspawn's host0 and ve-* interfaces have default config in ↵Lennart Poettering
networkd
2016-05-06man: link the part about [DHCP] to the DHCP= explanationLennart Poettering
2016-05-06man: move IPv6 note to the right sectionLennart Poettering
Make the XML validate again.
2016-05-06networkd: move the IAID configuration option into the [DHCP] sectionLennart Poettering
It's only relevant to DHCP, and it should be where the DUID is configured too.
2016-05-05Merge pull request #3190 from poettering/logind-fixesZbigniew Jędrzejewski-Szmek
2016-05-05logind: enforce a limit on inhibitors we hand outLennart Poettering
For similar reasons as the recent addition of a limit on sessions. Note that we don't enforce a limit on inhibitors per-user currently, but there's an implicit one, since each inhibitor takes up one fd, and fds are limited via RLIMIT_NOFILE, and the limit on the number of processes per user.
2016-05-05logind: enforce a limit on current user sessionsLennart Poettering
We really should put limits on all resources we manage, hence add one to the number of concurrent sessions, too. This was previously unbounded, hence set a relatively high limit of 8K by default. Note that most PAM setups will actually invoke pam_systemd prefixed with "-", so that the return code of pam_systemd is ignored, and the login attempt succeeds anyway. On systems like this the session will be created but is not tracked by systemd.
2016-05-05core: add io controller support on the unified hierarchyTejun Heo
On the unified hierarchy, blkio controller is renamed to io and the interface is changed significantly. * blkio.weight and blkio.weight_device are consolidated into io.weight which uses the standardized weight range [1, 10000] with 100 as the default value. * blkio.throttle.{read|write}_{bps|iops}_device are consolidated into io.max. Expansion of throttling features is being worked on to support work-conserving absolute limits (io.low and io.high). * All stats are consolidated into io.stats. This patchset adds support for the new interface. As the interface has been revamped and new features are expected to be added, it seems best to treat it as a separate controller rather than trying to expand the blkio settings although we might add automatic translation if only blkio settings are specified. * io.weight handling is mostly identical to blkio.weight[_device] handling except that the weight range is different. * Both read and write bandwidth settings are consolidated into CGroupIODeviceLimit which describes all limits applicable to the device. This makes it less painful to add new limits. * "max" can be used to specify the maximum limit which is equivalent to no config for max limits and treated as such. If a given CGroupIODeviceLimit doesn't contain any non-default configs, the config struct is discarded once the no limit config is applied to cgroup. * lookup_blkio_device() is renamed to lookup_block_device(). Signed-off-by: Tejun Heo <htejun@fb.com>
2016-05-05core: change default trigger limits for socket unitsLennart Poettering
Let's lower the default values a bit, and pick different defaults for Accept=yes and Accept=no sockets. Fixes: #3167
2016-05-04Merge pull request #3156 from keszybz/duid-settingsLennart Poettering
Rework DUID setting
2016-05-04Merge pull request #3170 from poettering/v230-preparation-fixesLennart Poettering
make virtualization detection quieter, rework unit start limit logic, detect unit file drop-in changes correctly, fix autofs state propagation
2016-05-03networkd: Add support to configure IPv6 preferred lifetime (#3102)Susant Sahani
Closes #2166. We only allow 0, infinity and forever. infinity and forever is same.
2016-05-03Merge pull request #3132 from ssahani/route-tableZbigniew Jędrzejewski-Szmek
networkd: add support to set route table
2016-05-03networkd: add support to set route tableSusant Sahani
networkd: add support to set route table 1. add support to configure the table id. if id is less than 256 we can fit this in the header of route as netlink property is a char. But in kernel this proepty is a unsigned 32. Hence if greater that 256 add this as RTA_TABLE attribute. 2. we are not setting the address family now. Now set this property.
2016-05-03man: add a description of DUIDType and DUIDRawDataZbigniew Jędrzejewski-Szmek
This is essentially a revert of f38e0cce75ff2ffbd99f7e382ed39c160bb7d799 (which removed the documentation of DUIDType on purpose). The description is heavily updated for the new semantics. This addresses #3127 § 4.
2016-05-03man: s/similar/similarly/Zbigniew Jędrzejewski-Szmek