summaryrefslogtreecommitdiff
path: root/man
AgeCommit message (Collapse)Author
2015-11-19gitignore: only ignore .html files in man/Martin Pitt
src/journal-remote/browse.html is git-tracked source and should not be ignored. Avoid accidentally ignoring similar ones in the future.
2015-11-18core: add new RandomSec= setting for time unitsLennart Poettering
This allows configuration of a random time on top of the elapse events, in order to spread time events in a network evenly across a range.
2015-11-18man: improve and fix documentation for RemainAfterElapse=Lennart Poettering
2015-11-18Merge pull request #1940 from evverx/man-journald-syslog-forwardingLennart Poettering
man: remove section about syslog forwarding
2015-11-18Merge pull request #1912 from mustrumr/calendarspec-sub-second-v3Lennart Poettering
Calendarspec sub second v3
2015-11-18Merge pull request #1889 from ssahani/socket-protoLennart Poettering
socket: Add support for socket protcol
2015-11-18socket: Add support for socket protcolSusant Sahani
Now we don't support the socket protocol like sctp and udplite . This patch add a new config param SocketProtocol: udplite/sctp With this now we can configure the protocol as udplite = IPPROTO_UDPLITE sctp = IPPROTO_SCTP Tested with nspawn:
2015-11-18man: remove section about syslog forwardingEvgeny Vereshchagin
journald: turn ForwardToSyslog= off by default After all, rsyslog and friends nowadays read their data directly from the journal, hence the forwarding is unnecessary in most cases. see 46b131574fdd7d77c15a0919ca9010c
2015-11-17man: calendarspec sub-second supportHristo Venev
2015-11-17core: add RemainAfterElapse= setting to timer unitsLennart Poettering
Previously, after a timer unit elapsed we'd leave it around for good, which has the nice benefit that starting a timer that shall trigger at a specific point in time multiple times will only result in one trigger instead of possibly many. With this change a new option RemainAfterElapse= is added. It defaults to "true", to mimic the old behaviour. If set to "false" timer units will be unloaded after they elapsed. This is specifically useful for transient timer units.
2015-11-16Merge pull request #1915 from poettering/btrfs-root-subvolDavid Herrmann
tmpfiles: create subvolumes for "v", "q", and "Q" only if / is a subv…
2015-11-16tmpfiles: create subvolumes for "v", "q", and "Q" only if / is a subvolumeLennart Poettering
It's not a good idea to create subvolumes for parts of the OS tree (such as /home, or /var) if the root directory is not a subvolume too. We shouldn't assume control of "heavier" objects such as subvolumes, if the originating object (the root directory) is a "light-weight" object, i.e. a plain directory. Effectively this means that chroot() environments that are run on a plain directory do not have to deal with problems around systemd creating subvolumes that cannot be removed with a simple "rm" anymore. However, if the chroot manager creates a proper subvolume for such an environment it will also get further subvolumes placed in there, under the assumption that the manager understands the concept of subvolumes in that case.
2015-11-16logind: change default to UserTasksMax= to 4096Lennart Poettering
2015-11-16core: enable TasksMax= for all services by default, and set it to 512Lennart Poettering
Also, enable TasksAccounting= for all services by default, too. See: http://lists.freedesktop.org/archives/systemd-devel/2015-November/035006.html
2015-11-13logind: add a new UserTasksMax= setting to logind.confLennart Poettering
This new setting configures the TasksMax= field for the slice objects we create for each user. This alters logind to create the slice unit as transient unit explicitly instead of relying on implicit generation of slice units by simply starting them. This also enables us to set a friendly description for slice units that way.
2015-11-13man: document our definition of a year and a monthLennart Poettering
Let's be accurate here, as this might be surprising to people.
2015-11-13util-lib: when parsing time values, accept "M" as short for "month"Lennart Poettering
nginx defines an uppercase "M" that way (in contrast to the lowercase "m" for "minute"), and it sounds like an OK logic to follow, so that we understand a true superset of time values nginx understands. http://nginx.org/en/docs/syntax.html
2015-11-13core: add new DefaultTasksMax= setting for system.confLennart Poettering
This allows initializing the TasksMax= setting of all units by default to some fixed value, instead of leaving it at infinity as before.
2015-11-13Merge pull request #1883 from evverx/man-systemd-service-sd-watchdog-enabledLennart Poettering
man: add note about sd_watchdog_enabled
2015-11-13man: add note about sd_watchdog_enabledEvgeny Vereshchagin
2015-11-13Merge pull request #1880 from fsateler/sysctl-docLennart Poettering
man: document systemd-sysctl arguments
2015-11-13man: document systemd-sysctl argumentsFelipe Sateler
2015-11-13Merge pull request #1879 from poettering/networkd-forwardTom Gundersen
stop managing per-interface IP forwarding settings
2015-11-13Merge pull request #1869 from poettering/kill-overridableMichal Schmidt
Remove support for RequiresOverridable= and RequisiteOverridable=
2015-11-13networkd: stop managing per-interface IP forwarding settingsLennart Poettering
As it turns out the kernel does not support per-interface IPv6 packet forwarding controls (unlike as it does for IPv4), but only supports a global option (#1597). Also, the current per-interface management of the setting isn't really useful, as you want it to propagate to at least one more interface than the one you configure it on. This created much grief (#1411, #1808). Hence, let's roll this logic back and simplify this again, so that we can expose the same behaviour on IPv4 and IPv6 and things start to work automatically again for most folks: if a network with this setting set is set up we propagate the setting into the global setting, but this is strictly one-way: we never reset it again, and we do nothing for network interfaces where this setting is not enabled. Fixes: #1808, #1597.
2015-11-12nspawn: add new --network-veth-extra= switch for defining additional veth linksLennart Poettering
The new switch operates like --network-veth, but may be specified multiple times (to define multiple link pairs) and allows flexible definition of the interface names. This is an independent reimplementation of #1678, but defines different semantics, keeping the behaviour completely independent of --network-veth. It also comes will full hook-up for .nspawn files, and the matching documentation.
2015-11-12core: remove support for RequiresOverridable= and RequisiteOverridable=Lennart Poettering
As discussed at systemd.conf 2015 and on also raised on the ML: http://lists.freedesktop.org/archives/systemd-devel/2015-November/034880.html This removes the two XyzOverridable= unit dependencies, that were basically never used, and do not enhance user experience in any way. Most folks looking for the functionality this provides probably opt for the "ignore-dependencies" job mode, and that's probably a good idea. Hence, let's simplify systemd's dependency engine and remove these two dependency types (and their inverses). The unit file parser and the dbus property parser will now redirect the settings/properties to result in an equivalent non-overridable dependency. In the case of the unit file parser we generate a warning, to inform the user. The dbus properties for this unit type stay available on the unit objects, but they are now hidden from usual introspection and will always return the empty list when queried. This should provide enough compatibility for the few unit files that actually ever made use of this.
2015-11-12core: simplify handling of %u, %U, %s and %h unit file specifiersLennart Poettering
Previously, the %u, %U, %s and %h specifiers would resolve to the user name, numeric user ID, shell and home directory of the user configured in the User= setting of a unit file, or the user of the manager instance if no User= setting was configured. That at least was the theory. In real-life this was not ever actually useful: - For the systemd --user instance it made no sense to ever set User=, since the instance runs in user context after all, and hence the privileges to change user IDs don't even exist. The four specifiers were actually not useful at all in this case. - For the systemd --system instance we did not allow any resolving that would require NSS. Hence, %s and %h were not supported, unless User=root was set, in which case they would be hardcoded to /bin/sh and /root, to avoid NSS. Then, %u would actually resolve to whatever was set with User=, but %U would only resolve to the numeric UID of that setting if the User= was specified in numeric form, or happened to be root (in which case 0 was hardcoded as mapping). Two of the specifiers are entirely useless in this case, one is realistically also useless, and one is pretty pointless. - Resolving of these settings would only happen if User= was actually set *before* the specifiers where resolved. This behaviour was undocumented and is really ugly, as specifiers should actually be considered something that applies to the whole file equally, independently of order... With this change, %u, %U, %s and %h are drastically simplified: they now always refer to the user that is running the service instance, and the user configured in the unit file is irrelevant. For the system instance of systemd this means they always resolve to "root", "0", "/bin/sh" and "/root", thus avoiding NSS. For the user instance, to the data for the specific user. The new behaviour is identical to the old behaviour in all --user cases and for all units that have no User= set (or set to "0" or "root").
2015-11-12man: improve the unit file enable state table a bitLennart Poettering
2015-11-12install: follow unit file symlinks in /usr, but not /etc when looking for ↵Lennart Poettering
[Install] data Some distributions use alias unit files via symlinks in /usr to cover for legacy service names. With this change we'll allow "systemctl enable" on such aliases. Previously, our rule was that symlinks are user configuration that "systemctl enable" + "systemctl disable" creates and removes, while unit files is where the instructions to do so are store. As a result of the rule we'd never read install information through symlinks, since that would mix enablement state with installation instructions. Now, the new rule is that only symlinks inside of /etc are configuration. Unit files, and symlinks in /usr are now valid for installation instructions. This patch is quite a rework of the whole install logic, and makes the following addional changes: - Adds a complete test "test-instal-root" that tests the install logic pretty comprehensively. - Never uses canonicalize_file_name(), because that's incompatible with operation relative to a specific root directory. - unit_file_get_state() is reworked to return a proper error, and returns the state in a call-by-ref parameter. This cleans up confusion between the enum type and errno-like errors. - The new logic puts a limit on how long to follow unit file symlinks: it will do so only for 64 steps at max. - The InstallContext object's fields are renamed to will_process and has_processed (will_install and has_installed) since they are also used for deinstallation and all kinds of other operations. - The root directory is always verified before use. - install.c is reordered to place the exported functions together. - Stricter rules are followed when traversing symlinks: the unit suffix must say identical, and it's not allowed to link between regular units and templated units. - Various modernizations - The "invalid" unit file state has been renamed to "bad", in order to avoid confusion between UNIT_FILE_INVALID and _UNIT_FILE_STATE_INVALID. Given that the state should normally not be seen and is not documented this should not be a problematic change. The new name is now documented however. Fixes #1375, #1718, #1706
2015-11-12Merge pull request #1863 from poettering/network-manDaniel Mack
man patch fix, and port journalctl --sync to use CLOCK_MONOTONIC timestamp files
2015-11-12core: remove SmackFileSystemRootLabel= againLennart Poettering
Apparently, util-linux' mount command implicitly drops the smack-related options anyway before passing them to the kernel, if the kernel doesn't know SMACK, hence there's no point in duplicating this in systemd. Fixes #1696
2015-11-12man: add more (and simpler examples) to network.link(5)Lennart Poettering
2015-11-11Merge pull request #1854 from poettering/unit-depsTom Gundersen
Dependency engine improvements
2015-11-11man: document automatic dependenciesLennart Poettering
For all units ensure there's an "Automatic Dependencies" section in the man page, and explain which dependencies are automatically added in all cases, and which ones are added on top if DefaultDependencies=yes is set. This is also done for systemd.exec(5), systemd.resource-control(5) and systemd.unit(5) as these pages describe common behaviour of various unit types.
2015-11-11execute: Add new PassEnvironment= directiveFilipe Brandenburger
This directive allows passing environment variables from the system manager to spawned services. Variables in the system manager can be set inside a container by passing `--set-env=...` options to systemd-spawn. Tested with an on-disk test.service unit. Tested using multiple variable names on a single line, with an empty setting to clear the current list of variables, with non-existing variables. Tested using `systemd-run -p PassEnvironment=VARNAME` to confirm it works with transient units. Confirmed that `systemctl show` will display the PassEnvironment settings. Checked that man pages are generated correctly. No regressions in `make check`.
2015-11-11networkd: IPv6 router discovery - follow IPv6AcceptRouterAdvertisemnt=Tom Gundersen
The previous behavior: When DHCPv6 was enabled, router discover was performed first, and then DHCPv6 was enabled only if the relevant flags were passed in the Router Advertisement message. Moreover, router discovery was performed even if AcceptRouterAdvertisements=false, moreover, even if router advertisements were accepted (by the kernel) the flags indicating that DHCPv6 should be performed were ignored. New behavior: If RouterAdvertisements are accepted, and either no routers are found, or an advertisement is received indicating DHCPv6 should be performed, the DHCPv6 client is started. Moreover, the DHCP option now truly enables the DHCPv6 client regardless of router discovery (though it will probably not be very useful to get a lease withotu any routes, this seems the more consistent approach). The recommended default setting should be to set DHCP=ipv4 and to leave IPv6AcceptRouterAdvertisements unset.
2015-11-11journalctl: make --rotate synchronous, tooLennart Poettering
Of course, ideally we'd just use normal synchronous bus calls, but this is out of the question as long as we rely on dbus-daemon (which logs to journald, and thus cannot use to avoid cyclic sync loops). Hence, instead, reuse the wait logic already implemented for --sync, and use a signal in one direction, and a mtime watch file for the reply.
2015-11-11journalctl: add new --sync switch for syncing the journal to diskLennart Poettering
With this new "--sync" switch we add a synchronous way to sync everything queued to disk, and return only after that's complete. This command gives the guarantee that anything queued before has hit the disk before the command returns. While we are at it, also improve the man pages and help text for journalctl a bit.
2015-11-11Merge pull request #1841 from keszybz/remove-snapshotTom Gundersen
Remove snapshot unit type
2015-11-10Remove snapshot unit typeZbigniew Jędrzejewski-Szmek
Snapshots were never useful or used for anything. Many systemd developers that I spoke to at systemd.conf2015, didn't even know they existed, so it is fairly safe to assume that this type can be deleted without harm. The fundamental problem with snapshots is that the state of the system is dynamic, devices come and go, users log in and out, timers fire... and restoring all units to some state from the past would "undo" those changes, which isn't really possible. Tested by creating a snapshot, running the new binary, and checking that the transition did not cause errors, and the snapshot is gone, and snapshots cannot be created anymore. New systemctl says: Unknown operation snapshot. Old systemctl says: Failed to create snapshot: Support for snapshots has been removed. IgnoreOnSnaphost settings are warned about and ignored: Support for option IgnoreOnSnapshot= has been removed and it is ignored http://lists.freedesktop.org/archives/systemd-devel/2015-November/034872.html
2015-11-10man: normalize indentation in sd-detect-virt(1)Zbigniew Jędrzejewski-Szmek
2015-11-10core: accept time units for time-based resource limitsLennart Poettering
Let's make sure "LimitCPU=30min" can be parsed properly, following the usual logic how we parse time values. Similar for LimitRTTIME=. While we are at it, extend a bit on the man page section about resource limits. Fixes: #1772
2015-11-10man: fix reference to description of time span syntaxLennart Poettering
2015-11-10Merge pull request #1825 from ssahani/ipv61-1Tom Gundersen
networkd: add support to configure IPv6 hop limit
2015-11-10Merge pull request #1830 from jsynacek/journalctl-timeTom Gundersen
man/journalctl: mention systemd.time(7) where appropriate
2015-11-10Merge pull request #1831 from keszybz/todo-trimmingTom Gundersen
Todo trimming
2015-11-10man: describe the reason why runlevels are obsoleteZbigniew Jędrzejewski-Szmek
Put it at the top of the file, where it's hard to miss. Also add the mapping of runlevel → target because since it is now static. I'm not adding runlevel(7), because we do not want to make obsolete stuff even more prominent.
2015-11-10man: tweak description of machinectl showZbigniew Jędrzejewski-Szmek
Also, machinectl status is anything but terse. Remove "terse".
2015-11-10man/journalctl: mention systemd.time(7) where appropriateJan Synacek
Original bug report: https://bugzilla.redhat.com/show_bug.cgi?id=1182661