summaryrefslogtreecommitdiff
path: root/man
AgeCommit message (Collapse)Author
2016-07-22Merge pull request #3784 from poettering/NEWS-v231Zbigniew Jędrzejewski-Szmek
2016-07-22Merge pull request #3777 from poettering/id128-reworkZbigniew Jędrzejewski-Szmek
uuid/id128 code rework
2016-07-22man: rework resolved.conf's Cache= documentationLennart Poettering
Let's not mention the supposed security benefit of turning off caching. It is really questionnable, and I#d rather not create the impression that we actually believed turning off caching would be a good idea. Instead, mention that Cache=no is implicit if a DNS server on the local host is used.
2016-07-22core: change TasksMax= default for system services to 15%Lennart Poettering
As it turns out 512 is max number of tasks per service is hit by too many applications, hence let's bump it a bit, and make it relative to the system's maximum number of PIDs. With this change the new default is 15%. At the kernel's default pids_max value of 32768 this translates to 4915. At machined's default TasksMax= setting of 16384 this translates to 2457. Why 15%? Because it sounds like a round number and is close enough to 4096 which I was going for, i.e. an eight-fold increase over the old 512 Summary: | on the host | in a container old default | 512 | 512 new default | 4915 | 2457
2016-07-22logind: change TasksMax= value for user logins to 33%Lennart Poettering
Let's change from a fixed value of 12288 tasks per user to a relative value of 33%, which with the kernel's default of 32768 translates to 10813. This is a slight decrease of the limit, for no other reason than "33%" sounding like a nice round number that is close enough to 12288 (which would translate to 37.5%). (Well, it also has the nice effect of still leaving a bit of room in the PID space if there are 3 cooperating evil users that try to consume all PIDs... Also, I like my bikesheds blue). Since the new value is taken relative, and machined's TasksMax= setting defaults to 16384, 33% inside of containers is usually equivalent to 5406, which should still be ample space. To summarize: | on the host | in the container old default | 12288 | 12288 new default | 10813 | 5406
2016-07-22core: support percentage specifications on TasksMax=Lennart Poettering
This adds support for a TasksMax=40% syntax for specifying values relative to the system's configured maximum number of processes. This is useful in order to neatly subdivide the available room for tasks within containers.
2016-07-22machine-id-setup: add new --print switchLennart Poettering
If specified we'll simply output the used machine ID.
2016-07-22sd-id128: handle NULL return parameter in sd_id128_from_string() nicerLennart Poettering
If the return parameter is NULL, simply validate the string, and return no error.
2016-07-21Merge pull request #3770 from AlexanderKurtz/masterLennart Poettering
bootctl: Always use upper case for "/EFI/BOOT" and "/EFI/BOOT/BOOT*.EFI".
2016-07-21bootctl: Always use upper case for "/EFI/BOOT" and "/EFI/BOOT/BOOT*.EFI".Alexander Kurtz
If the ESP is not mounted with "iocharset=ascii", but with "iocharset=utf8" (which is for example the default in Debian), the file system becomes case sensitive. This means that a file created as "FooBarBaz" cannot be accessed as "foobarbaz" since those are then considered different files. Moreover, a file created as "FooBar" can then also not be accessed as "foobar", and it also prevents such a file from being created, as both would use the same 8.3 short name "FOOBAR". Even though the UEFI specification [0] does give the canonical spelling for the files mentioned above, not all implementations completely conform to that, so it's possible that those files would already exist, but with a different spelling, causing subtle bugs when scanning or modifying the ESP. While the proper fix would of course be that everybody conformed to the standard, we can work around this problem by just referencing the files by their 8.3 short names, i.e. using upper case. Fixes: #3740 [0] <http://www.uefi.org/specifications>, version 2.6, section 3.5.1.1
2016-07-20man: document a tiny bit better what udev_device_get_is_initialized() ↵Lennart Poettering
actually returns
2016-07-19man: revise entry about specifying a file path (#3739)mulkieran
* Specifying a device node has an effect much larger than a simple shortcut for a field/value match, so the original sentence is no longer a good way to start the paragraph. * Specifying a device node causes matches to be generated for all ancestor devices of the device specified, not just its parents. * Indicates that the path must be absolute, but that it may be a link. * Eliminates a few typos.
2016-07-19man: mention that locale changes might require initramfs to be rebuilt (#3754)Zbigniew Jędrzejewski-Szmek
https://bugzilla.redhat.com/show_bug.cgi?id=1151651 Also explain what localectl does a bit better: https://bugzilla.redhat.com/show_bug.cgi?id=1357861
2016-07-19Merge pull request #3685 from kinvolk/alessandro/inaccessible-pathsLennart Poettering
namespace: unify limit behavior on non-directory paths
2016-07-19sd-journal: suppress empty linesLennart Poettering
Let's make sure our logging APIs is in sync with how stdout/stderr logging works.
2016-07-19doc,core: Read{Write,Only}Paths= and InaccessiblePaths=Alessandro Puccetti
This patch renames Read{Write,Only}Directories= and InaccessibleDirectories= to Read{Write,Only}Paths= and InaccessiblePaths=, previous names are kept as aliases but they are not advertised in the documentation. Renamed variables: `read_write_dirs` --> `read_write_paths` `read_only_dirs` --> `read_only_paths` `inaccessible_dirs` --> `inaccessible_paths`
2016-07-19namespace: unify limit behavior on non-directory pathsAlessandro Puccetti
Despite the name, `Read{Write,Only}Directories=` already allows for regular file paths to be masked. This commit adds the same behavior to `InaccessibleDirectories=` and makes it explicit in the doc. This patch introduces `/run/systemd/inaccessible/{reg,dir,chr,blk,fifo,sock}` {dile,device}nodes and mounts on the appropriate one the paths specified in `InacessibleDirectories=`. Based on Luca's patch from https://github.com/systemd/systemd/pull/3327
2016-07-19man: document that sd_journal_print() strips trailing whitespaceLennart Poettering
2016-07-18Merge pull request #3746 from keszybz/trivial-fixesDaniel Mack
Trivial fixes
2016-07-17Drop parentheses in two placesZbigniew Jędrzejewski-Szmek
2016-07-16man: mention system-shutdown hook directory in synopsis (#3741)Michael Biebl
The distinction between systemd-shutdown the binary vs system-shutdown the hook directory (without the 'd') is not immediately obvious and can be quite confusing if you are looking for a directory which doesn't exist. Therefore explicitly mention the hook directory in the synopsis with a trailing slash to make it clearer which is which.
2016-07-16man: replace dash with mdash where appropriateZbigniew Jędrzejewski-Szmek
2016-07-14correct information about implicit dependencies (#3730)Michal Soltys
systemd.special.xml: corrections about implicit dependencies for basic.target, sysinit.target and shutdown.target. systemd.target.xml: corrections about implicit dependencies for target units in general.
2016-07-12Various fixes for typos found by lintian (#3705)Michael Biebl
2016-07-12man: fix indefinite articles (#3694)Jakub Wilk
2016-07-11treewide: fix typos and remove accidental repetition of wordsTorstein Husebø
2016-07-08man: improve wording for calendar spec's repetition values (#3687)Ivan Shapovalov
2016-07-05man: networkd bonding remove 802.3ad from transmit hash policy (#3666)Susant Sahani
The xmit_hash_policy does not have 802.3ad value. Remove this from man.
2016-07-04man: add link to sd_bus_add_match to busctl.xmlTorstein Husebø
2016-07-04treewide: fix typosTorstein Husebø
2016-07-01calendarspec: use ".." notation for ranges of weekdaysDouglas Christman
For backwards compatibility, both the new format (Mon..Wed) and the old format (Mon-Wed) are supported.
2016-07-01calendarspec: allow ranges in date and time specificationsDouglas Christman
Resolves #3042
2016-06-30man: minor typo "has already has happened" (#3635)Lukas Lösche
2016-06-30sd-event: expose the event loop iteration counter via ↵Lennart Poettering
sd_event_get_iteration() (#3631) This extends the existing event loop iteration counter to 64bit, and exposes it via a new function sd_event_get_iteration(). This is helpful for cases like issue #3612. After all, since we maintain the counter anyway, we might as well expose it. (This also fixes an unrelated issue in the man page for sd_event_wait() where micro and milliseconds got mixed up)
2016-06-28man: clarify NotifyAccess overriding (#3620)Luca Bruno
Type=notify has a magic overriding case where a NotifyAccess=none is turned into a NotifyAccess=main for sanity purposes. This makes docs more clear about such behavior: https://github.com/systemd/systemd/blob/2787d83c28b7565ea6f80737170514e5e6186917/src/core/service.c#L650:L651
2016-06-26man: document what Authenticated: in the systemd-resolve output actually ↵Lennart Poettering
means (#3571) My educated guess is that #3561 was filed due to confusion around the systemd-resolve "Data Authenticated:" output. Let's try to clean up the confusion a bit, and document what it means in the man page.
2016-06-24systemctl: Create new unit files with "edit --force" (#3584)Doug Christman
2016-06-24resolved: add option to disable caching (#3592)Martin Pitt
In some cases, caching DNS results locally is not desirable, a it makes DNS cache poisoning attacks a tad easier and also allows users on the system to determine whether or not a particular domain got visited by another user. Thus provide a new "Cache" resolved.conf option to disable it.
2016-06-24Merge pull request #3549 from poettering/resolved-moreTom Gundersen
resolved: more fixes, among them "systemctl-resolve --status" to see DNS configuration in effect, and a local DNS stub listener on 127.0.0.53
2016-06-23execute: add a new easy-to-use RestrictRealtime= option to unitsLennart Poettering
It takes a boolean value. If true, access to SCHED_RR, SCHED_FIFO and SCHED_DEADLINE is blocked, which my be used to lock up the system.
2016-06-22nspawn: improve man page (#3577)Lennart Poettering
This change documents the existance of the systemd-nspawn@.service template unit file, which was previously not mentioned at all. Since the unit file uses slightly different default than nspawn invoked from the command line, these defaults are now explicitly documented too. A couple of further additions and changes are made, too. Replaces: #3497
2016-06-22man: document that %f in units always unescapes (#3578)Lennart Poettering
2016-06-22watchdog: Support changing watchdog_usec during runtime (#3492)Minkyung
Add sd_notify() parameter to change watchdog_usec during runtime. Application can change watchdog_usec value by sd_notify like this. Example. sd_notify(0, "WATCHDOG_USEC=20000000"). To reset watchdog_usec as configured value in service file, restart service. Notice. sd_event is not currently supported. If application uses sd_event_set_watchdog, or sd_watchdog_enabled, do not use "WATCHDOG_USEC" option through sd_notify.
2016-06-21man: document some sd-bus functions (#3567)mahkoh
* sd_bus_add_match * sd_bus_get_fd * sd_bus_message_read_basic * sd_bus_process
2016-06-21man: beef up resolved man pageLennart Poettering
Let's explain the various APIs and various ways to handle /etc/resolv.conf.
2016-06-21resolve: add "systemd-resolve --status" commandLennart Poettering
The new command shows the per-link and global DNS configuration currently in effect. This is useful to quickly see the DNS settings resolved acquired from networkd and that was pushed into it via the bus APIs.
2016-06-19man: match runlevel symlinks recommendation with our makefile (#3563)Lukáš Nykrýn
In makefile we create symlinks runlevel5.target to graphical.target and runlevel2-4.target to multi-user.target. Let's say the same thing in systemd.special manpage.
2016-06-16Merge pull request #3511 from andir/networkd-vrfZbigniew Jędrzejewski-Szmek
networkd: add support for vrf interfaces (#3316)
2016-06-16Merge pull request #3481 from poettering/relative-memcgLennart Poettering
various changes, most importantly regarding memory metrics
2016-06-16networkd: vrf: add support for enslaving devices to VRFsAndreas Rammhold