summaryrefslogtreecommitdiff
path: root/rules
AgeCommit message (Collapse)Author
2016-06-13./move.shLuke Shumaker
2016-05-19rules: add /dev/disk/by-partuuid symlinks also for dos partition tablesUwe Kleine-König
blkid reports PARTUUID values also for partitions that are defined by a dos partitioning scheme. Instead of limiting the partitioning scheme to "gpt or dos" just drop the test for the partitioning scheme and trust blkid to do the right thing.
2016-04-29rules: add NVMe rules (#3136)Ming Lin
Add NVMe rules using the "wwid" attribute. root@target:~# cat /sys/block/nvme0n1/wwid eui.3825004235000591 root@target:~# ls /dev/disk/by-id/ -l |grep nvme lrwxrwxrwx 1 root root 13 Apr 27 16:08 nvme-eui.3825004235000591 -> ../../nvme0n1 lrwxrwxrwx 1 root root 15 Apr 27 16:08 nvme-eui.3825004235000591-part1 -> ../../nvme0n1p1 lrwxrwxrwx 1 root root 15 Apr 27 16:08 nvme-eui.3825004235000591-part2 -> ../../nvme0n1p2
2016-04-18Mark nbd as inactive until connected (#2422)Wouter Verhelst
Currently, 99-systemd.rules.in contains a line for network block devices, which mark them as inactive until the first change event, and as active from then on forward. This is not correct. A network block device can be connected or disconnected; this state is signalled by the presence or absense of a "pid" file, which contains the PID of the nbd client userspace process that started the connection. Update the rules file so that it checks for the presence of that file to decide what to set SYSTEMD_READY to. Note that current kernels do issue a change event upon connecting the device, but not yet upon disconnecting. While it's possible to wait until that's been fixed, the behaviour of the rule with TEST!="pid" in the absence of a proper uevent is exactly the same as the behaviour of the old rule; so it should be safe to apply now. Signed-off-by: Wouter Verhelst <w@uter.be>
2016-04-12rules: set SYSTEMD_READY=0 on DM_UDEV_DISABLE_OTHER_RULES_FLAG=1 only with ↵Lukáš Nykrýn
ADD event (#2747) The "SYSTEMD_READY=0" will cause automatic unmount of mountpoint that is on top of such DM device if this is used with multipath which sets DM_UDEV_DISABLE_OTHER_RULES_FLAG in case we have a CHANGE event thatcomes after DM multipath device reload when one of the paths is down or up. See https://bugzilla.redhat.com/show_bug.cgi?id=1312011
2015-10-01rfkill: rework and make it listen on /dev/rfkillLennart Poettering
With this rework we introduce systemd-rfkill.service as singleton that is activated via systemd-rfkill.socket that listens on /dev/rfkill. That way, we get notified each time a new rfkill device shows up or changes state, in which case we restore and save its current setting to disk. This is nicer than the previous logic, as this means we save/restore state even of rfkill devices that are around only intermittently, and save/restore the state even if the system is shutdown abruptly instead of cleanly. This implements what I suggested in #1019 and obsoletes it.
2015-08-09UML: Fix block device setupThomas Meyer
User mode linux block devices start with ubd, e.g. ubda, ubdb, etc..
2015-07-05rules: block - add dasd to whitelistKay Sievers
2015-06-29Merge pull request #387 from kaysievers/wipTom Gundersen
udev: Remove accelerometer helper
2015-06-29Process cciss devicesCédric Delmas
Do not skip the persistent storage rules for cciss devices
2015-06-27udev: Remove accelerometer helperBastien Nocera
It's moved to the iio-sensor-proxy D-Bus service.
2015-06-26Merge pull request #353 from kaysievers/hidGreg Kroah-Hartman
rules: remove all power management from udev
2015-06-26Revert "hwdb: add a touchpad hwdb"Peter Hutterer
The main purpose of this hwdb was to tag touchpads that have the physical trackstick buttons wired to the touchpad (Lenovo Carbon X1 3rd, Lenovo *50 series). This hwdb is not required on kernels 4.0 and above, the kernel now re-routes button presses through the trackstick's device node. Userspace does not need to do anything. See kernel commit cdd9dc195916ef5644cfac079094c3c1d1616e4c. This reverts commit 001a247324b44c0e0b8fdba41a6fc66e7465b8b6.
2015-06-24rules: remove all power management from udevKay Sievers
It is not udev's task to apply any of these setting that way, or from udev rules files. Things need to be sortet out in the kernel, or explicit whitelist can possibly be added to the hardware database. Until that is sorted out, and general agreement, udev is not willing to maintain any such lists or power management settings in general. "Thanks for digging this out! I thought my Kinesis keyboard got broken and ordered a new one, only to find out that the new one doesn't work as well. I'm not sure whether we should start collecting a blacklist of keyboards which don't work with USB autosuspend, or rather a whitelist? Or revert this wholesale?" https://github.com/systemd/systemd/issues/340
2015-06-10rules: re-add cciss rulesAlex Crawford
The original commit (1aff206) doesn't explain why these were removed. This adds them back since they are in fact needed.
2015-06-08rules: whitelist xvd* devicesAlex Crawford
Xen disks need to be whitelisted as well.
2015-06-03Add /dev/xvd* to 60-persistent-storage whitelistEd Swierk
Without this, systemd-udevd does not create persistent storage symlinks for xen block devices.
2015-06-01udev: Bring back persistant storage symlinks for bcacheDavid Mohr
https://bugs.debian.org/787367
2015-05-30rules: restore block watch after CHANGE eventsTom Gundersen
When processing an event, the watch is disabled, make sure it is restorted after a CHANGE event has been processed.
2015-05-30rules: fix typo in block watch ruleTom Gundersen
The intention was to turn this rule from using a blacklist to a whitelist, but there was a stray '!'.
2015-04-23rules: Add more firewire properties for sound, to be closer to USB and PCIAdam Goode
USB and PCI soundcards have a nice set of ID_* properties. It would be handy for firewire soundcards to have the same. Note that this removes the explicit setting of ID_ID in the firewire conditional. Because we are now setting ID_SERIAL, ID_ID will come from later in the file.
2015-04-23rules: Don't use ALSA card id in ID_IDAdam Goode
The ALSA id sysattr is generated by the sound subsystem and is not a stable identifier. It is generated though some string manipulation then made unique if there is a conflict. This means that it is enumeration-dependent and shouldn't be used for ID_ID. If ID_ID is supposed to be system-unique, it is not already since for firewire it is generated from the guid and there are broken firewire devices that have duplicate guids across devices. This is tracked for PulseAudio at https://bugs.freedesktop.org/show_bug.cgi?id=90129. This is essentially a revert of systemd ed1b2d9fc7d5c5bfe2a67b0b8ff9e5ea8694268e.
2015-04-12rules: finish incomplete renameZbigniew Jędrzejewski-Szmek
Fixup for 51c0c2869845a058268d54c3111d55d0dd485704.
2015-04-11rules: fix tests for removable stateMatthew Garrett
We only care about whether our direct parent is removable, not whether any further points up the tree are - the kernel will take care of policy for those itself. This enables autosuspend on devices where the root hub reports that its removable state is unknown.
2015-04-11udev: builtin-keyboard: add support for EVDEV_ABS_*Peter Hutterer
Parse properties in the form EVDEV_ABS_00="<min>:<max>:<res>:<fuzz>:<flat>" and apply them to the kernel device. Future processes that open that device will see the updated EV_ABS range. This is particularly useful for touchpads that don't provide a resolution in the kernel driver but can be fixed up through hwdb entries (e.g. bcm5974). All values in the property are optional, e.g. a string of "::45" is valid to set the resolution to 45. The order intentionally orders resolution before fuzz and flat despite it being the last element in the absinfo struct. The use-case for setting fuzz/flat is almost non-existent, resolution is probably the most common case we'll need. To avoid multiple hwdb invocations for the same device, replace the hwdb "keyboard:" prefix with "evdev:" and drop the separate 60-keyboard.rules file. The new 60-evdev.rules is called for all event nodes anyway, we don't need a separate rules file and second callout to the hwdb builtin.
2015-03-2750-udev-default.rules: don't run anything but REMOVE_CMD on removeHarald Hoyer
we don't want to run usb_id and input_id on ACTION=="remove"
2015-03-24rules: storage - support MemoryStick (non-Pro) cardsMantas Mikulėnas
These are handled by a different driver than MemoryStick Pro.
2015-03-24rules: storage - whitelist partitioned MS & MMC devicesKay Sievers
On Mon, Mar 23, 2015 at 8:55 AM, Mantas Mikulėnas <grawity@gmail.com> wrote: > On Tue, Mar 17, 2015 at 11:50 PM, Kay Sievers <kay@vrfy.org> wrote: >> On Tue, Mar 17, 2015 at 5:00 PM, Mantas Mikulėnas <grawity@gmail.com> >> wrote: >> > Accidentally dropped in 1aff20687f4868575. >> > --- >> > rules/60-persistent-storage.rules | 2 +- >> > 1 file changed, 1 insertion(+), 1 deletion(-) >> >> > +KERNEL!="loop*|mmcblk[0-9]*|mspblk[0-9]*|nvme*|sd*|sr*|vd*", >> > GOTO="persistent_storage_end" >> >> We can't do that, we need to ignore the mmc*rpmb devices: >> >> http://cgit.freedesktop.org/systemd/systemd/commit/?id=b87b01cf83947f467f3c46d9831cd67955fc46b9 >> >> Maybe "mmcblk*[0-9]" will work? > > Yeah, that would probably work (the names are like mmcblk0p1 etc.)
2015-03-24rules: storage - don't apply rules to remove eventsTom Gundersen
This line was accidentally lost in 52346b5f5424.
2015-03-20rules: avoid 'device/' accessesDavid Herrmann
We should never access parents, as the sysfs hierarchy is in no way stable. Use KERNELS== etc. to match on a parent, then access it via $attr{} (which accesses the matching device, not the current device).
2015-03-20rules: fix input-name for keyboard rulesDavid Herrmann
We match on the evdev node, but only the parent has a "name" attribute. Use $attr{device/name} to access it. This is borked since 2013, I wonder how that ever worked? Maybe this will suddenly fix all the DMI-based key detections. Thanks to Peter Hutterer for catching this!
2015-03-16rules: keyboard - prefix "atkbd" match strings like we prefix the "name" stringsKay Sievers
2015-03-16rules: keyboard - only search the "input" subsystem for the modaliasKay Sievers
2015-03-16Revert "hwdb: merge atkbd into platform matches"David Herrmann
This reverts commit ba76ee29bc02879fb42c048132af8889b00220d5. As it turns out, we need to match on driver=atkbd to not load the fixups on any plugged USB devices. That is, whenever you use "name:<name>:dmi:<dmi>" style matches, you better provide a name or you're screwing things up.
2015-03-16rules: keyboard - remove "platform" from commentsKay Sievers
2015-03-16hwdb: merge atkbd into platform matchesDavid Herrmann
Currently, we always run hwdb 'keyboard:name:$attr{name}:$attr{[dmi/id]modalias}' as last step to match keyboards. Therefore, if nothing else matched so far, we still try the device-name+dmi combination. However, we have a special atkbd rule which is only run for atkbd as: hwdb 'keyboard:$attr{[dmi/id]modalias}' This is redundant, as we already pass the same information to hwdb in the last fallback step. This patch converts the hwdb "keyboard:dmi:*" matches to "keyboard:name:*:dmi:*" matches and drops the redundant rule.
2015-03-16rules: drop redundant matchDavid Herrmann
The 60-keyboard rules are already guared by KERNEL!="event*" bail-outs, therefore, KERNELS="input*" is always true. Drop it!
2015-03-16hwdb: support bluetooth keyboard fixupsDavid Herrmann
Drop the restriction not to match on bluetooth devices. They are supported just fine!
2015-03-16hwdb: convert to generic input-modalias matchesDavid Herrmann
There is no reason to match on usb-modaliases, if we can use the input-modalias to achieve the same. This commit changes the keyboard-lookups to not be restricted to USB, but pass all modaliases to the hwdb. Furthermore, we convert all usb:* matches to input:* matches, thus getting rid of any ambiguity if multiple usb devices are chained (or a bluetooth device / etc. is on top). Note that legacy keyboard:usb:* matches are still supported, but deprecated. If possible, please use keyboard:input:* matches instead. This is a required step to make other input devices work with 60-keyboard.hwdb. Other bus-types are often chained on usb and we want to avoid any ambiguity here if we incorrectly match on a USB hub.
2015-03-12rules: merge tty and serial rules fileKay Sievers
2015-03-12rules: merge udev-late.rules filesKay Sievers
2015-03-12rules: default - remove legacy agpgartKay Sievers
2015-03-12rules: systemd - remove legacy "ram" from block device blacklistKay Sievers
2015-03-12rules: move block device rules to its own rules fileKay Sievers
2015-03-12rules: storage - relace blacklist with explicit whitelistKay Sievers
Newly added kernel drivers repeatedly pass our blacklist and cause trouble for the devices, because they do not expect to be examined by udev's default rules which include blkid. This turns the blacklist into a whitelist. Device type which need support for additional symlinks need to be added to the whitelist now. Note, that the by-id, by-path symlinks are only intended for hotpluggable devices. There is no reason for exotic, or for statically configured devices to provide them.
2015-02-13rules: simplify mmc RPMB handlingMartin Pitt
We don't actually want a by-path/ symlink for MMC RPMB devices, so just add them to the blacklist. This will prevent creating wrong by-path links and blkid'ing those.
2015-02-13rules: Fix by-path of mmc RPMB partitions and don't blkid themMartin Pitt
Linux 3.10+ exposes RPMB (Replay Protected Memory Block) partitions of MMC devices [1] ; trying to read them with blkid or other unspecific means will cause kernel buffer I/O errors and timeouts. So don't run blkid on these. Also ensure that /dev/disk/by-path creates proper symlinks and exposes the -rpmb partition separately, instead of letting the "normal" partition symlink point to the rpbm device (this is a race condition). [1] http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=090d25fe224c0 https://launchpad.net/bugs/1333140
2015-01-29hwdb: add a touchpad hwdbPeter Hutterer
Currently used to tag devices in the new Lenovo *50 series and the X1 Carbon 3rd. These laptops re-introduced the physical trackpoint buttons that were missing from the *40 series but those buttons are now wired up to the touchpad. The touchpad now sends BTN_0, BTN_1 and BTN_2 for the trackpoint. The same button codes were used in older touchpads that had dedicated scroll up/down buttons. Input drivers need to work around this and thus know what they're dealing with. For the previous gen we introduced INPUT_PROP_TOPBUTTONPAD in the kernel, but the resulting mess showed that these per-device quirks should really live in userspace. The list currently includes the X1 Carbon 3rd PNPID, others will be added as get to know which PNPID they have.
2015-01-28rules: clean up stale CD drive mounts after ejectionMartin Pitt
Ejecting a CD with the hardware drive button only causes a change uevent, but the device node stays around (just without a medium). Pick up these uevents and mark the device as SYSTEMD_READY=0 on ejection, so that systemd stops the device unit and consequently all mount units on it. On media insertion, mark the device as SYSTEMD_READY=1 again. https://bugs.freedesktop.org/show_bug.cgi?id=72206 https://bugzilla.opensuse.org/show_bug.cgi?id=909418 https://bugs.archlinux.org/task/42071 https://bugs.launchpad.net/bugs/1168742
2015-01-15udev: merge evdev_id into input_idDavid Herrmann
There is no reason to keep both separated. We want to avoid API specific tools and instead keep generic terms like 'input'.