| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This will now also handle `journalctl --directory=/var/log/journal`
properly.
|
|
After `journalctl -D /var/log/journal` "--directory", "--file",
"--machine" and "--root" should not be available for completion, because
they are exclusive. But multiple `--file` arguments are allowed.
|
|
In 68c4f6d the following was added:
local -a _modes; _modes=("--user" "--system")
local _sys_service_mgr=${${words:*_modes}[(R)(${(j.|.)_modes})]:---system}
With the following comment:
> If neither are on the line, --system is set; for system services to be
> completed.
But it does not work as documented:
% _modes=(--user --system)
% words=()
% echo ${${words:*_modes}[(R)(${(j.|.)_modes})]:---system}
However, it should not use `--system` in that case anyway, so this patch
removes the part that should cause a default to be used and adds some
comments.
|
|
This only completes fields from `journalctl --user` in _journal_fields when `--user`
is used.
It also changes $_sys_service_mgr to include both `--system` and `--user`,
because `journalctl` behaves different from `systemctl` in this regard.
No attempt is made to filter out invalid combinations, e.g. when using both
`--directory` and `--system` (see https://github.com/systemd/systemd/issues/3949).
|
|
This uses the same mechanism from _systemctl to inject `--user` into the
`journalctrl -F _EXE` call to list executables.
Before this patch the "commands" section would list executables from
system units always.
|
|
Use `$_sys_service_mgr` to handle `--user`, so that `systemctl --user
stop` will correctly filter the active (user) units. Before this patch,
only user units that also exist as system units and are stoppable there
would be listed.
|
|
This new output mode formats all timestamps using the usual format_timestamp()
call we use pretty much everywhere else. Timestamps formatted this way are some
ways more useful than traditional syslog timestamps as they include weekday,
month and timezone information, while not being much longer. They are also not
locale-dependent. The primary advantage however is that they may be passed
directly to journalctl's --since= and --until= switches as soon as #3869 is
merged.
While we are at it, let's also add "short-unix" to shell completion.
|
|
This patch renames Read{Write,Only}Directories= and InaccessibleDirectories=
to Read{Write,Only}Paths= and InaccessiblePaths=, previous names are kept
as aliases but they are not advertised in the documentation.
Renamed variables:
`read_write_dirs` --> `read_write_paths`
`read_only_dirs` --> `read_only_paths`
`inaccessible_dirs` --> `inaccessible_paths`
|
|
|
|
Relative to: https://github.com/systemd/systemd/pull/3474
|
|
|
|
It has been replaced by --state=failed.
|
|
|
|
|
|
v2:
- use /sys/class/net to list interfaces,
also copy the same code to systemd-nspawn
v3:
- do not propose "any" twice for --type
|
|
Support for net_cls.class_id through the NetClass= configuration directive
has been added in v227 in preparation for a per-unit packet filter mechanism.
However, it turns out the kernel people have decided to deprecate the net_cls
and net_prio controllers in v2. Tejun provides a comprehensive justification
for this in his commit, which has landed during the merge window for kernel
v4.5:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=bd1060a1d671
As we're aiming for full support for the v2 cgroup hierarchy, we can no
longer support this feature. Userspace tool such as nftables are moving over
to setting rules that are specific to the full cgroup path of a task, which
obsoletes these controllers anyway.
This commit removes support for tweaking details in the net_cls controller,
but keeps the NetClass= directive around for legacy compatibility reasons.
|
|
|
|
But also keep the old name as (undocumented) compatibility around.
The reload-or-try-restart was documented to be a NOP if the unit is not running, since the previous commits this is
also implemented. The old name suggests that the "try" logic only applies to restarting. Fix this, by moving the "try-"
to the front, to indicate that the whole option is a NOP if the service isn't running.
|
|
Escape colons and backslashes in unit names.
This gives correct completions for units with names like
systemd-backlight@backlight:acpi_video0.service
and
systemd-fsck@dev-disk-by\x2duuid-...
|
|
The current code is not compatible with current dkr protocols anyway,
and dkr has a different focus ("microservices") than nspawn anyway
("whole machine containers"), hence drop support for it, we cannot
reasonably keep this up to date, and it creates the impression we'd
actually care for the microservices usecase.
|
|
This directive allows passing environment variables from the system
manager to spawned services. Variables in the system manager can be set
inside a container by passing `--set-env=...` options to systemd-spawn.
Tested with an on-disk test.service unit. Tested using multiple variable
names on a single line, with an empty setting to clear the current list
of variables, with non-existing variables.
Tested using `systemd-run -p PassEnvironment=VARNAME` to confirm it
works with transient units.
Confirmed that `systemctl show` will display the PassEnvironment
settings.
Checked that man pages are generated correctly.
No regressions in `make check`.
|
|
Snapshots were never useful or used for anything. Many systemd
developers that I spoke to at systemd.conf2015, didn't even know they
existed, so it is fairly safe to assume that this type can be deleted
without harm.
The fundamental problem with snapshots is that the state of the system
is dynamic, devices come and go, users log in and out, timers fire...
and restoring all units to some state from the past would "undo"
those changes, which isn't really possible.
Tested by creating a snapshot, running the new binary, and checking
that the transition did not cause errors, and the snapshot is gone,
and snapshots cannot be created anymore.
New systemctl says:
Unknown operation snapshot.
Old systemctl says:
Failed to create snapshot: Support for snapshots has been removed.
IgnoreOnSnaphost settings are warned about and ignored:
Support for option IgnoreOnSnapshot= has been removed and it is ignored
http://lists.freedesktop.org/archives/systemd-devel/2015-November/034872.html
|
|
|
|
|
|
Fixes #1549.
|
|
|
|
|
|
|
|
The file is obsolete, use /proc/self/mounts instead.
Also, yuck, the code is so awful...
|
|
This way completion lists should stay up to date.
Also use systemctl -t help to list types in zsh, as was already
done in bash.
|
|
|
|
_loginctl: respects the verbose style. which allows a user to get
the pre d5df0d950f8bc behavior of not showing a description for sessions
and users, by default they aren't shown.
zstyle ':completion:*' verbose true
or
zstyle ':completion:*:loginctl*:*' verbose true # or similar
Will show the descriptions.
zstyle ':completion:*' verbose true
and
zstyle ':completion:*:loginctl*:*' verbose false # or similar
Won't show descriptions for loginctl only
_systemd: complete pids for systemd-notify's --pid option.
display a message of the expected argument for other options.
_systemd-inhibit: complete block & delay for --mode
display a message of the expected argument for --who/--why
|
|
filenames will be completed for --image/-i/--bind/--bind-ro/--tmpfs
network interfaces for --network-(interface|macvlan|ipvlan|bridge)
users for --user/-u, yes & no for --register, x86 * x86-64 for
--personality
display a message of the expected argument for --machine/-M/--uuid
--slice/-S/--port/-p/--selinux-*/-Z/-L/--setenv
Allow completing commands(and their options) of the host system for COMMAND
|
|
1) the iterator `fun' has an local scope. after running the completer,
it will no longer be defined.
2) use _describe instead of calling compadd. Using compadd without
calling _description or something similar before, restricts the
user's ability to customize what is presented to them.
zstyle ':completion:*' format 'Completing %d'
- now displays an header showing what is being completed.
zstyle ':completion::complete:loginctl-*::users' users user1 user2
- allows the user to manually specify which users is offered
zstyle :completion::complete:loginctl-kill-user:\* \
ignored-patterns '(100<0-4>|user1)'
- selectively ignore some users when completing loginctl kill-user
<tab>
Sessions, UIDs now have descriptions when selecting them.
3) removed the call to _loginctl_all_seats in _loginctl_attach(), since
_loginctl_seats calls it a second time, right before adding matches.
There isn't a noticeable difference doing this.
|
|
Optimize _filter_units_by_property by calling `systemctl` only once with
a list of units, and not once per unit.
I could not reproduce the "Unknown unit" error mentioned in a FIXME,
which might have made this necessary previously.
|
|
systemd-mailing-devs/1432910411-14517-1-git-send-email-llua@gmx.com
zsh-completion: a more style/tag aware _systemctl
|
|
systemd-mailing-devs/1431989131-25145-1-git-send-email-llua@gmx.com
zsh-completion: fix completion of --user services
|
|
The command is 'install', not 'instal'. Fix that typo.
|
|
|
|
using _wanted instead of calling compadd directly. this allows the user to customize
possible matches.
An example being, grouping units by type:
autoload -Uz compinit; compinit
zstyle ':completion:*' menu select
zstyle ':completion:*' group-name ''
zstyle ':completion:*' format 'Completing %d'
zstyle -e ':completion:*:*:systemctl-(((re|)en|dis)able|(*re|)start|reload*):*' \
tag-order 'local type; for type in service template target socket;
reply+=( systemd-units:-${type}:${type} ); reply=( "$reply systemd-units:-misc:misc" )'
zstyle ':completion:*:systemd-units-template' ignored-patterns '^*@'
zstyle ':completion:*:systemd-units-target' ignored-patterns '^*.target'
zstyle ':completion:*:systemd-units-socket' ignored-patterns '^*.socket'
zstyle ':completion:*:systemd-units-service' ignored-patterns '^*.service'
zstyle ':completion:*:systemd-units-misc' ignored-patterns '*(@|.(service|socket|target))'
also, <poke> http://lists.freedesktop.org/archives/systemd-devel/2015-May/032012.html
|
|
By the time __systemctl is called, --user/--system are shifted out of
`words' by _arguments. This patch queries the array sooner.
In the case that both --user and --system are on the line when compsys runs,
_sys_service_mgr is set to the latter. Which is seemingly how systemctl behaves.
If neither are on the line, --system is set; for system services to be completed.
|
|
_sys_restartable_units local to the completer.
|
|
I seem to have forgot about _systemctl_active_units().
|
|
`_sys_failed_units' local to the completer.
|
|
|
|
reenable and disable.
compadd's -a option treats non-option arguments as arrays. So
$(_systemctl_get_template_names) expands to some words that aren't
legal array names. Even if there were, they would be empty; thus adding
nothing.
deduplicated a few functions too.
|
|
arrays _sys_(re|)startable_units
|
|
--irreversible/--ignore-dependencies/--fail are deprececated since 4dc5b821ae737914499119e29811fc3346e3d97c.
Also add shell completions for --jobs-mode.
|
|
|
