| Age | Commit message (Collapse) | Author |
|---|
|
It's primarily just a property of the Manager object after all, and we
try to refer to PID 1 as "manager" instead of "systemd", hence let's to
stick to this here too.
|
|
This changes log_unit_info() (and friends) to take a real Unit* object
insted of just a unit name as parameter. The call will now prefix all
logged messages with the unit name, thus allowing the unit name to be
dropped from the various passed romat strings, simplifying invocations
drastically, and unifying log output across messages. Also, UNIT= vs.
USER_UNIT= is now derived from the Manager object attached to the Unit
object, instead of getpid(). This has the benefit of correcting the
field for --test runs.
Also contains a couple of other logging improvements:
- Drops a couple of strerror() invocations in favour of using %m.
- Not only .mount units now warn if a symlinks exist for the mount
point already, .automount units do that too, now.
- A few invocations of log_struct() that didn't actually pass any
additional structured data have been replaced by simpler invocations
of log_unit_info() and friends.
- For structured data a new LOG_UNIT_MESSAGE() macro has been added,
that works like LOG_MESSAGE() but prefixes the message with the unit
name. Similar, there's now LOG_LINK_MESSAGE() and
LOG_NETDEV_MESSAGE().
- For structured data new LOG_UNIT_ID(), LOG_LINK_INTERFACE(),
LOG_NETDEV_INTERFACE() macros have been added that generate the
necessary per object fields. The old log_unit_struct() call has been
removed in favour of these new macros used in raw log_struct()
invocations. In addition to removing one more function call this
allows generated structured log messages that contain two object
fields, as necessary for example for network interfaces that are
joined into another network interface, and whose messages shall be
indexed by both.
- The LOG_ERRNO() macro has been removed, in favour of
log_struct_errno(). The latter has the benefit of ensuring that %m in
format strings is properly resolved to the specified error number.
- A number of logging messages have been converted to use
log_unit_info() instead of log_info()
- The client code in sysv-generator no longer #includes core code from
src/core/.
- log_unit_full_errno() has been removed, log_unit_full() instead takes
an errno now, too.
- log_unit_info(), log_link_info(), log_netdev_info() and friends, now
avoid double evaluation of their parameters
|
|
|
|
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
|
|
We would require a match against all three: patterns specified
with --to, with --from, and as positional arguments to show an
edge. This does not seem useful. Let instead the positional args
behave like they were specified in both --to and --from, which is
fairly intuitive and should be more useful.
|
|
|
|
|
|
|
|
Pretty much everywhere else we use the generic term "machine" when
referring to containers in API, so let's do though in sd-bus too. In
particular, since the concept of a "container" exists in sd-bus too, but
as part of the marshalling system.
|
|
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
|
- Rename log_meta() → log_internal(), to follow naming scheme of most
other log functions that are usually invoked through macros, but never
directly.
- Rename log_info_object() to log_object_info(), simply because the
object should be before any other parameters, to follow OO-style
programming style.
|
|
It is redundant to store 'hash' and 'compare' function pointers in
struct Hashmap separately. The functions always comprise a pair.
Store a single pointer to struct hash_ops instead.
systemd keeps hundreds of hashmaps, so this saves a little bit of
memory.
|
|
Found with Coverity. Fixes: CID#1237756
|
|
If we have an error in the early sd_bus_* calls then unit_times
will still be null.
Found with coverity. Fixes: CID#996464
|
|
align --help texts
Negative switches are a bad un-normalized thing. We alerady have some,
but we should try harder to avoid intrdoucing new ones.
Hence, instead of adding two switches:
--foobar
--no-foobar
Let's instead use the syntax
--foobar
--foobar=yes
--foobar=no
Where the first two are equivalent. The boolean argument is parsed
following the usual rules.
Change all new negative switches this way.
This patch also properly aligns the --help table, so that single char
switches always get a column separate of the long switches.
|
|
|
|
Since b5eca3a2059f9399d1dc52cbcf9698674c4b1cf0 we don't attempt to GC
busses anymore when unsent messages remain that keep their reference,
when they otherwise are not referenced anymore. This means that if we
explicitly want connections to go away, we need to close them.
With this change we will no do so explicitly wherver we connect to the
bus from a main program (and thus know when the bus connection should go
away), or when we create a private bus connection, that really should go
away after our use.
This fixes connection leaks in the NSS and PAM modules.
|
|
getopt is usually good at printing out a nice error message when
commandline options are invalid. It distinguishes between an unknown
option and a known option with a missing arg. It is better to let it
do its job and not use opterr=0 unless we actually want to suppress
messages. So remove opterr=0 in the few places where it wasn't really
useful.
When an error in options is encountered, we should not print a lengthy
help() and overwhelm the user, when we know precisely what is wrong
with the commandline. In addition, since help() prints to stdout, it
should not be used except when requested with -h or --help.
Also, simplify things here and there.
|
|
|
|
We need to check if argv[1] is set before compare
|
|
|
|
Both systemd-analyze and systemd-run only access org.freedesktop.systemd1
on the bus. This patch allows using systemd-run --user and systemd-analyze
--user even if the user session's bus is not properly integrated with the
systemd user unit.
https://bugs.freedesktop.org/show_bug.cgi?id=79252 and other reports...
|
|
This makes "systemd-analyze plot" read host information from remote.
While we are it show if this is a virtualized system.
https://bugs.freedesktop.org/show_bug.cgi?id=76498
Reported-by: Zach <zachcook1991@gmail.com>
|
|
systemd-analyze plot > test.svg produces output with all y and height
element attributes equal to zero. This of course causes the resulting
svg to appear blank (zero height). Bug does not affect x86. Looks like
a compiler optimization may be the culprit.
https://github.com/archlinuxarm/PKGBUILDs/issues/815
|
|
Let's unify generation of unicode chars at one place.
Also, don't add an extra space into chars we print, except for the tree
chars where this is really necessary.
|
|
It would crash and the legend in the bottom followed the time 0.0.
|
|
- Add space between if/for and the opening parentheses
- Place the opening brace on same line as the function (not for udev)
From the CODING_STYLE
Try to use this:
void foo() {
}
instead of this:
void foo()
{
}
|
|
|
|
|
|
|
|
|
|
|
|
bus_log_parse_error()
|
|
The sd-event APIs should be available only as part of libsystemd-bus so
that the utility calls are not linked into each independently and we can
minimize the number of libraries we have.
|
|
Among other things this makes sure we always expose a --version command
and show it in the help texts.
|
|
|
|
|
|
|
|
|
|
Set the width of the svg to always fit the longest string
while taking its starting position into consideration.
Place the text on the right while the starting point is
in the first half of the screen. After that we put it on
the left to save the svg from being wider that it has to.
|
|
|
|
|
|
|
|
|
|
|
|
In programs like eog and gimp the transparant background did not
look very good.
https://bugs.freedesktop.org/show_bug.cgi?id=70720
|
