| Age | Commit message (Collapse) | Author |
|---|
|
The current raw_clone function takes two arguments, the cloning flags and
a pointer to the stack for the cloned child. The raw cloning without
passing a "thread main" function does not make sense if a new stack is
specified, as it returns in both the parent and the child, which will fail
in the child as the stack is virgin. All uses of raw_clone indeed pass NULL
for the stack pointer which indicates that both processes should share the
stack address (so you better don't pass CLONE_VM).
This commit refactors the code to not require the caller to pass the stack
address, as NULL is the only sensible option. It also adds the magic code
needed to make raw_clone work on sparc64, which does not return 0 in %o0
for the child, but indicates the child process by setting %o1 to non-zero.
This refactoring is not plain aesthetic, because non-NULL stack addresses
need to get mangled before being passed to the clone syscall (you have to
apply STACK_BIAS), whereas NULL must not be mangled. Implementing the
conditional mangling of the stack address would needlessly complicate the
code.
raw_clone is moved to a separete header, because the burden of including
the assert machinery and sched.h shouldn't be applied to every user of
missing_syscalls.h
|
|
networkd: IPv6 fixes
|
|
Add some special filesystems that should not be shifted, most of them
relate to the host and not to containers.
|
|
Although networkd has option (LinkLocalAddressing=) to toggle IPv6LL autoconfiguration, when it is enabled, the address is autoconfigured by the kernel, but not networkd.
Therefore, we do not statically set IFLA_INET6_ADDR_GEN_MODE to IN6_ADDR_GEN_MODE_EUI64, but dynamically depending on whether stable_secret is set, just as what the kernel does by default.
Note that this does NOT affect the global addresses configured by networkd.
|
|
ask-password: ask for passphrases not only on the first console
|
|
but also on all other consoles. This does help on e.g. mainframes
where often a serial console together with other consoles are
used. Even rack based servers attachted to both a serial console
as well as having a virtual console do sometimes miss a connected
monitor.
To be able to ask on all terminal devices of /dev/console the devices
are collected. If more than one device are found, then on each of the
terminals a inquiring task for passphrase is forked and do not return
to the caller.
Every task has its own session and its own controlling terminal.
If one of the tasks does handle a password, the remaining tasks
will be terminated.
Also let contradictory options on the command of
systemd-tty-ask-password-agent fail.
Spwan for each device of the system console /dev/console a own process.
Replace the system call wait() with with system call waitid().
Use SIGTERM instead of SIGHUP to get unresponsive childs down.
Port the collect_consoles() function forward to a pulbic and strv
based function "get_kernel_consoles()" in terminal-util.c and use this
in tty-ask-password-agent.c.
|
|
Fixes:
-bash-4.3# echo core >/proc/sys/kernel/core_pattern
-bash-4.3# kill -ABRT 1
-bash-4.3# kill -ABRT 1
[ 61.373922] systemd[1]: segfault at 7fff1d0a8f48 ip 00007fc9ca91b1c3 sp 00007fff1d0a8f50 error 6 in libc-2.23.so[7fc9ca8ce000+1c0000]
[ 61.768017] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000008b
[ 61.768017]
...
Recursive ABRT and segfault:
PID 1 - core
TID 1:
...
#153905 0x00005575fc3f829d log_dispatch
#153906 0x00005575fc3f8aa3 log_assert
#153907 0x00005575fc3f8ae9 log_assert_failed
#153908 0x00005575fc3e7eb1 safe_close
#153909 0x00005575fc3f6d5e log_close_journal
#153910 0x00005575fc3f829d log_dispatch
#153911 0x00005575fc3f85a1 log_internalv
#153912 0x00005575fc3f86a1 log_internal
#153913 0x00005575fc31c4c1 crash
#153914 0x00007fb26f2cf3d0 __restore_rt
#153915 0x00007fb26f2ced00 pause
#153916 0x00005575fc403944 freeze
#153917 0x00005575fc31bf7b freeze_or_reboot
...
|
|
Implement compat translation between IO* and BlockIO* settings
|
|
minor improvements for dealing with MAC Addresses
|
|
rm_rf_physical_and_freep in tests (#3292)
Some distros don't mount /tmp as tmpfs.
For example:
https://lists.ubuntu.com/archives/ubuntu-cloud/2016-January/001009.html
Some tests:
* print 'Attempted to remove disk file system, and we can't allow that.'
* don't really cleanup /tmp
|
|
cgroup IO controller supports maximum limits for both bandwidth and IOPS but
systemd resource control currently only supports bandwidth limits. This patch
adds support for IOReadIOPSMax and IOWriteIOPSMax when unified cgroup hierarchy
is in use.
It isn't difficult to also add BlockIOReadIOPS and BlockIOWriteIOPS for legacy
hierarchies but IO control on legacy hierarchies is half-broken anyway, so
let's leave it alone for now.
|
|
Currently, there are two cgroup IO limits, bandwidth max for read and write,
and they are hard-coded in various places. This is fine for two limits but IO
is expected to grow more limits - low, high and max limits for bandwidth and
IOPS - and hard-coding each limit won't make sense.
This patch replaces hard-coded limits with an array indexed by
CGroupIOLimitType and accompanying string and default value tables so that new
limits can be added trivially.
|
|
This isn't quite symmetrical to in_addr_from_string() because it also returns
an offset indicating how much of the string was consumed by the matched
pattern. This offset reporting is needed for either of the following use
cases:
* verifying the lack of trailing garbage after such an address
* parsing subsequent data from the same string
|
|
define HEXDIGITS alongside DIGITS, and use it where it's already useful. We'll
use it again shortly when parsing MAC addresses.
|
|
core: add io controller support on the unified hierarchy
|
|
|
|
|
|
Add a synchronization point so that custom initramfs units can run
after the root device becomes available, before it is fsck'd and
mounted.
This is useful for custom initramfs units that may modify the
root disk partition table, where the root device is not known in
advance (it's dynamically selected by the generators).
|
|
Fix "preset-all" with dangling symlinks and install-section hint emitted too eagerly
|
|
_const_ means that the caller can assume that the function will return the same
result every time (and will not modify global memory). special_glyph() meets
this: even though it depends on global memory, that part of global memory is
not expected to change. This allows the calls to special_glyph() to be
optimized, even if -flto is not used.
|
|
That function doesn't draw anything on it's own, just returns a string, which
sometimes is more than one character. Also remove "DRAW_" prefix from character
names, TREE_* and ARROW and BLACK_CIRCLE are unambigous on their own, don't
draw anything, and are always used as an argument to special_glyph().
Rename "DASH" to "MDASH", as there's more than one type of dash.
|
|
Make use of this in nspawn at a couple of places. A later commit should port
more code over to this, including networkd.
|
|
don't reopen socket fds when reloading the daemon
|
|
Previously, we'd simply close and reopen the socket file descriptors. This is
problematic however, as we won't transition through the SOCKET_CHOWN state
then, and thus the file ownership won't be correct for the sockets.
Rework the flushing logic, and actually read any queued data from the sockets
for flushing, and accept any queued messages and disconnect them.
|
|
On the unified hierarchy, blkio controller is renamed to io and the interface
is changed significantly.
* blkio.weight and blkio.weight_device are consolidated into io.weight which
uses the standardized weight range [1, 10000] with 100 as the default value.
* blkio.throttle.{read|write}_{bps|iops}_device are consolidated into io.max.
Expansion of throttling features is being worked on to support
work-conserving absolute limits (io.low and io.high).
* All stats are consolidated into io.stats.
This patchset adds support for the new interface. As the interface has been
revamped and new features are expected to be added, it seems best to treat it
as a separate controller rather than trying to expand the blkio settings
although we might add automatic translation if only blkio settings are
specified.
* io.weight handling is mostly identical to blkio.weight[_device] handling
except that the weight range is different.
* Both read and write bandwidth settings are consolidated into
CGroupIODeviceLimit which describes all limits applicable to the device.
This makes it less painful to add new limits.
* "max" can be used to specify the maximum limit which is equivalent to no
config for max limits and treated as such. If a given CGroupIODeviceLimit
doesn't contain any non-default configs, the config struct is discarded once
the no limit config is applied to cgroup.
* lookup_blkio_device() is renamed to lookup_block_device().
Signed-off-by: Tejun Heo <htejun@fb.com>
|
|
The macro determines the right length of a AF_UNIX "struct sockaddr_un" to pass to
connect() or bind(). It automatically figures out if the socket refers to an
abstract namespace socket, or a socket in the file system, and properly handles
the full length of the path field.
This macro is not only safer, but also simpler to use, than the usual
offsetof() + strlen() logic.
|
|
|
|
make virtualization detection quieter, rework unit start limit logic, detect unit file drop-in changes correctly, fix autofs state propagation
|
|
Commit 82501b3fc added an early break when a terminal node is found to
incorrect place -- before setting c. This caused trie to be built that
does not correspond to what it points to in buffer, causing incorrect
deduplications:
# cat /etc/udev/rules.d/99-bug.rules
ENV{FOO}=="0"
ENV{xx0}=="BAR"
ENV{BAZ}=="00"
# udevadm test
* RULE /etc/udev/rules.d/99-bug.rules:1, token: 0, count: 2, label: ''
M ENV match 'FOO' '0'(plain)
* RULE /etc/udev/rules.d/99-bug.rules:2, token: 2, count: 2, label: ''
M ENV match 'xx0' 'BAR'(plain)
* RULE /etc/udev/rules.d/99-bug.rules:3, token: 4, count: 2, label: ''
M ENV match 'BAZ' 'x0'(plain)
* END
The addition of "xx0" following "0" will cause a trie like this to be
created:
c=\0
c=0 "0"
c=0 "xx0" <-- note the c is incorrect here, causing "00" to be
c=O "FOO" deduplicated to it
c=R "BAR"
This in effect caused the usb_modeswitch rule for Huawei modems to never
match and this never be switched to serial mode from mass storage.
|
|
machined: make "clone" asynchronous, and support copy-based fall-back
|
|
This is hardly useful, it's trivial for developers to get that info by running
cat /proc/cpuinfo.
Fixes #3155
|
|
Fall back to a normal copy operation when the backing file system isn't btrfs,
and hence doesn't support cheap snapshotting. Of course, this will be slow, but
given that the execution is asynchronous now, this should be OK.
Fixes: #1308
|
|
When recursively copying a directory tree, fix up the file times after having
created all contents in it, so that our changes don't end up altering any of
the directory times.
|
|
|
|
Let's make sigkill_wait() take a normal pid_t, and add sigkill_waitp() that
takes a pointer (which is useful for usage in _cleanup_), following the usual
logic we have for this.
|
|
Refuse aliases to non-aliasable units in more places
Fixes #2730.
|
|
Add nios2 architecture support. The nios2 is a softcore by Altera.
|
|
Assorted fixes #3149 + one commit tacked on top
|
|
Hashing should be quicker than allocating, hence let's first check if the
string already exists and only then allocate a new copy for it.
|
|
|
|
In 4.2 kernel headers, some netlink defines are missing that we need. missing.h
already can add them in, but currently makes this dependent on a definition
that these kernels already have. Change the check hence to check for the newest
definition in the table, so that the whole bunch of definitions as added in on
all kernels lacking this.
|
|
~ suffix works fine, but looks to much like it the file is supposed to be
automatically cleaned up. For new versions of configuration files installers
might want to using something that looks more permanent like foobar.new.
So let's add treat ".old" and ".new" as special.
Update test to match.
|
|
We previously would fail with EOPNOTSUPP when encountering an AF_UNIX socket in
the directory tree to copy. Fix that, and copy them too (even if they are dead
in the result).
Fixes: #2914
|
|
hidden_or_backup_file()
And let's add ".bak" as a generic suffix for backups, that people can use
without having to register their stuff in our list.
|
|
created in too
Fixes: #2831
|
|
On s390 size_t is an unsigned long, nor an unsigned int. They both are
of the same size and can be cast to each other safely, but the compiler
still seems unhappy about incompatible pointers.
Fixes: 7c2da2ca8
|
|
Various small cleanups in shared code
|
|
Added to kernel 4.6.
|
|
In standard linux parlance, "hidden" usually means that the file name starts
with ".", and nothing else. Rename the function to convey what the function does
better to casual readers.
Stop exposing hidden_file_allow_backup which is rather ugly and rewrite
hidden_file to extract the suffix first. Note that hidden_file_allow_backup
excluded files with "~" at the end, which is quite confusing. Let's get
rid of it before it gets used in the wrong place.
|
|
dirent_is_file_with_suffix
If the file name is supposed to end in a suffix, there's not need to check the
name against a list of "special" file names, which is slow. Instead, just check
that the name doens't start with a period.
|
