| Age | Commit message (Collapse) | Author |
|---|
|
rework C11 utf8.[ch] to use char32_t instead of uint32_t when referring
to unicode chars, to make things more expressive.
[
@zonque:
* rebased to current master
* use AC_CHECK_DECLS to detect availibility of char{16,32}_t
* make utf8_encoded_to_unichar() return int
]
|
|
nineteenth dnssec patch
|
|
shutdown: complain if process excluded from killing spree runs of the same rootfs as PID1 (v3)
|
|
The call combines outputing a string with prefixing it with a space, optionally. This is useful to shorten the logic
for outputing lists of strings, that are space separated.
|
|
For the search domain logic the order is highly relevant, hence make sure when collecting the various search domains to
add them to an ordered set, so that the order between search domains of a specific link is retained.
|
|
Previously, .network files only knew a vaguely defined "Domains=" concept, for which the documentation declared it was
the "DNS domain" for the network connection, without specifying what that means.
With this the Domains setting is reworked, so that there are now "routing" domains and "search" domains. The former are
to be used by resolved to route DNS request to specific network interfaces, the latter is to be used for searching
single-label hostnames with (in addition to being used for routing). Both settings are configured in the "Domains="
setting. Normal domain names listed in it are now considered search domains (for compatibility with existing setups),
while those prefixed with "~" are considered routing domains only. To route all lookups to a specific interface the
routing domain "." may be used, referring to the root domain. An alternative syntax for this is the "*", as was already
implemented before using the "wildcard" domain concept.
This commit adds proper parsers for this new logic, and exposes this via the sd-network API. This information is not
used by resolved yet, this will be added in a later commit.
|
|
Journald disk usage
|
|
rootfs as PID1
|
|
The LLMNR spec suggests to do do reverse address lookups by doing direct LLMNR/TCP connections to the indicated
address, instead of doing any LLMNR multicast queries. When we do this and the peer doesn't actually implement LLMNR
this will result in a TCP connection error, which we need to handle. In contrast to most LLMNR lookups this will give
us a quick response on whether we can find a suitable name. Report this as new transaction state, since this should
mostly be treated like an NXDOMAIN rcode, except that it's not one.
|
|
This mimics what networkd is doing to detect a carrier.
|
|
The code to format the iovec is shared with log.c. All call sites to
server_driver_message are changed to include the additional "MESSAGE="
part, but the new functionality is not used and change in functionality
is not expected.
iovec is preallocated, so the maximum number of messages is limited.
In server_driver_message N_IOVEC_PAYLOAD_FIELDS is currently set to 1.
New code is not oom safe, it will fail if memory cannot be allocated.
This will be fixed in subsequent commit.
|
|
chaloulo/split-mode-host-remove-port-from-journal-filename
journal-remote: split-mode=host, remove port from journal filename
|
|
core: Add flexible way to provide socket type
the socket type should be a diffrent argumet
in make_socket_fd . In this way we can set the socket
type like SOCK_STREAM SOCK_DGRAM in the address.
journal-remote: modify make_socket_fd
|
|
core: add valgrind helper for daemon-reexec
|
|
Coverity inspired fixes
|
|
Inspired by https://github.com/systemd/systemd/issues/2187#issuecomment-165587140
|
|
This function is not supposed to fail, it only returns a boolean.
So add an assert in case anyone calls it without proper initialization
of *b.
|
|
Fix IPv6PrivacyExtension (networkd-ndisc.c)
|
|
basic/terminal-util: introduce SYSTEMD_COLORS environment variable
|
|
... to determine if color output should be enabled. If the variable is not set,
fall back to using on_tty(). Also, rewrite existing code to use
colors_enabled() where appropriate.
|
|
This is useful for alternative network management solutions (such as NetworkManager) to push DNS configuration data
into resolved.
The calls will fail should networkd already have taken possesion of a link, so that the bus API is only available if
we don't get the data from networkd.
|
|
Remove gcc warnings v2
|
|
|
|
Not every byte sequence is valid utf8. We allow escaping of non-utf8
sequences in strings by using octal and hexadecimal escape sequences
(\123 and \0xAB) for bytes at or above 128. Users of cunescape_one
could infer whether such use occured when they received an answer
between 128 and 256 in *ret (a non-ascii one byte character). But this
is subtle and misleading: the comments were wrong, because ascii is a
subset of unicode, so c != 0 did not mean non-unicode, but rather
ascii-subset-of-unicode-or-raw-byte. This was all rather confusing, so
make the "single byte" condition explicit.
I'm not convinced that allowing non-utf8 sequences to be produced is
useful in all cases where we allow it (e.g. in config files), but that
behaviour is unchanged, just made more explicit.
This also fixes an (invalid) gcc warning about unitialized variable
(*ret_unicode) in callers of cunescape_one.
|
|
errno_from_name used an unusual return convention where 0 meant
"not found". This tripped up config_parse_syscall_errno(),
which would treat that as success. Return -EINVAL instead,
and adjust bus_error_name_to_errno() for the new convention.
Also remove a goto which was used as a simple if and clean
up surroudning code a bit.
|
|
This is not particularly intrusive because it happens in simple
utility functions. It helps gcc understand that error codes
are negative.
This gets a rid of most of the remaining warnings.
|
|
This small addition fixes the issues #1982 and #2242.
IPv6PrivacyExtension now works as expected even when a RA is received.
|
|
Compare errno with zero in a way that tells gcc that
(if the condition is true) errno is positive.
|
|
gcc is confused by the common idiom of
return errno ? -errno : -ESOMETHING
and thinks a positive value may be returned. Replace this condition
with errno > 0 to help gcc and avoid many spurious warnings. I filed
a gcc rfe a long time ago, but it hard to say if it will ever be
implemented [1].
Both conventions were used in the codebase, this change makes things
more consistent. This is a follow up to bcb161b0230f.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61846
|
|
In contrast to ascii_strcasecmp_nn() it takes two character buffers with their individual length. It will then compare
the buffers up the smaller size of the two buffers, and finally the length themselves.
|
|
|
|
Also add a coccinelle receipt to help with such transitions.
|
|
This patch adds support for ambient capabilities in service files. The
idea with ambient capabilities is that the execed processes can run with
non-root user and get some inherited capabilities, without having any
need to add the capabilities to the executable file.
You need at least Linux 4.3 to use ambient capabilities. SecureBit
keep-caps is automatically added when you use ambient capabilities and
wish to change the user.
An example system service file might look like this:
[Unit]
Description=Service for testing caps
[Service]
ExecStart=/usr/bin/sleep 10000
User=nobody
AmbientCapabilities=CAP_NET_ADMIN CAP_NET_RAW
After starting the service it has these capabilities:
CapInh: 0000000000003000
CapPrm: 0000000000003000
CapEff: 0000000000003000
CapBnd: 0000003fffffffff
CapAmb: 0000000000003000
|
|
Change the capability bounding set parser and logic so that the bounding
set is kept as a positive set internally. This means that the set
reflects those capabilities that we want to keep instead of drop.
|
|
Previously, when we couldn't connect to a DNS server via TCP we'd abort the whole transaction using a
"connection-failure" state. This change removes that, and counts failed connections as "lost packet" events, so that
we switch back to the UDP protocol again.
|
|
This also introduces a new macro siphash24_compress_byte() which is useful to add a single byte into the hash stream,
and ports one user over to it.
|
|
The hash operations are not really that specific to hashmaps, hence split them into a .c module of their own.
|
|
|
|
Rather than walking a list of valid values one-by-one, generate a
switch-case statement for the IN_SET() macro. This allows the compiler to
further optimize its code output, possibly by generating jump tables.
This effectively decreases the binary size slightly.
The implementation is based on macro overloading depending on the number of
arguments. h/t to the following post:
https://stackoverflow.com/questions/11761703/overloading-macro-on-number-of-arguments
|
|
In a couple of cases we maintain configuration settings that know an on
and off state, like a boolean, plus some additional states. We generally
parse them as booleans first, and if that fails check for specific
additional values.
This adds a generalized set of macros for parsing such settings, and
ports one use in resolved and another in networkd over to it.
|
|
core: socket options fix SCTP_NODELAY
|
|
|
|
SCTP_NODELAY is diffrent to TCP_NODELAY.
Apply proper options in case of SCTP.
|
|
It's weird doing bitwise operations on booleans. Let's use the boolean
XOR (i.e. "!=") instead of the bitweise XOR (i.e. "^") on them.
|
|
|
|
this is a follow-up for commit 11c3a36649e5e5e77db499c92f3
|
|
The file /sys/module/ipv6 does not exist in all container
implementations (e.g. Virtuozzo). Using /proc/net/sockstat6
detects IPv6 support reliably in these environments, too.
This file does not exist when the kernel is not compiled with
IPv6 support, or if IPv6 support is disabled, so simply checking
for existence should be a suitable check.
Fixes #2059
|
|
This adds an self-standing RB-Tree implementation to src/basic/. This
will be needed for NSEC RR lookups, since we need "close lookups", which
hashmaps (not even ordered-hashmaps) can give us in reasonable time.
|
|
Borked since
commit 3ee897d6c2401effbc82f5eef35fce405781d6c8
Author: Lennart Poettering <lennart@poettering.net>
Date: Wed Sep 23 01:00:04 2015 +0200
tree-wide: port more code to use send_one_fd() and receive_one_fd()
because here our fd is not connected and we need to specify
the address.
|
|
We need to check the same thing in multiple tests. Use a shared
macro to make it easier to update the list of errnos.
Change the errno code for "unitialized cgroup fs" for ENOMEDIUM.
Exec format error looks like something more serious.
This fixes test-execute invocation in mock.
|
