| Age | Commit message (Collapse) | Author |
|---|
|
When mcstransd* is running non-raw functions will return translated SELinux
context. Problem is that libselinux will cache this information and in the
future it will return same context even though mcstransd maybe not running at
that time. If you then check with such context against SELinux policy then
selinux_check_access may fail depending on whether mcstransd is running or not.
To workaround this problem/bug in libselinux, we should always get raw context
instead. Most users will not notice because result of access check is logged
only in debug mode.
* SELinux context translation service, which will translates labels to human
readable form
|
|
|
|
|
|
Refactor allocation of the result string to the top, since it is
currently done in both branches of the condition.
Remove unreachable code checking for EXTRACT_DONT_COALESCE_SEPARATORS
when state == SEPARATOR (the only place where SEPARATOR is assigned to
state follows a check for EXTRACT_DONT_COALESCE_SEPARATORS that jumps to
the end of the function.)
Tested by running test-util successfully.
Follow up to: 206644aedeb8859801051ac170ec562c6a113a79
|
|
This covers the case where an argument is an empty string, such as ''.
Instead of allocating the empty string in the individual conditions when
state == VALUE, just always allocate it at the end of state == START, at
which point we know we will have an argument.
Tested that test-util keeps passing after the refactor.
Follow up to: 14e685c29d5b317b815e3e9f056648027852b07e
|
|
... instead of an array of n individual bytes.
Silences a lot of warnings in smatch.
|
|
cgls/cgtop: a variety of modernizations
|
|
A few auto-pager improvements
|
|
In preparation of the unified cgroup support, let's clean up cgtop:
a) rework time code to be based on "nsec_t" rather than "struct timespec"
b) Introduce long option --order= for selecting ordering
c) count number of processes only in the main hierarchy, don't bother
with the controller hierarchies. We don't allow orthogonal
hierarchies in systemd anymore, hence there's no point to check the
other hierarchies.
d) Deal with non-monotonic cpuacct values (see #749)
e) When sorting groups, don't do prefix compare when ordering by number
of tasks, since this is not accumulative for all children.
f) Actually make --cpu without parameter work
g) Don't output control characters when we get them as input.
Fixes #749.
|
|
Let's add a way to get the type-specific D-Bus interface of a unit from
either its type or name to src/basic/unit-name.[ch]. That way we can
share it with the client side, where it is useful in tools like cgls or
machinectl.
Also ports over machinectl to make use of this.
|
|
Apparently, sendfile() does not work between fifos and ttys, but
splice() does, hence let's optionally fall back to that. This is useful
to implement the fallback pager this way.
|
|
Various networkd and dhcp updates
|
|
Let's do this everywhere the same way.
|
|
This reverts commit d4d00020d6ad855d65d31020fefa5003e1bb477f. The idea of
the commit is broken and needs to be reworked. We really cannot reduce
the bus-addresses to a single address. We always will have systemd with
native clients and legacy clients at the same time, so we also need both
addresses at the same time.
|
|
refcnt.h only exists for cases where objects are simultaneously handled
by different threads. Otherwise it should not be used. The only case
where this applies is sd_bus, really, and pretty much none of our APIs,
since we do not claim thread-safety for them.
|
|
Let's move the timedated-specific code to time-util.h and make it
generic.
|
|
Some of the operations machined/machinectl implement are also very
useful when applied to the host system (such as machinectl login,
machinectl shell or machinectl status), hence introduce a pseudo-machine
by the name of ".host" in machined that refers to the host system, and
may be used top execute operations on the host system with.
This copies the pseudo-image ".host" machined already implements for
image related commands.
(This commit also adds a PK privilege for opening a PTY in a container,
which was previously not accessible for non-root.)
|
|
When enumerating machines from /run, and when accepting machine names
for operations, be more strict and always validate.
Note that these checks are strictly speaking unnecessary, since
enumeration happens only on the trusted /run...
|
|
As it turns out machine_name_is_valid() does the exact same thing as
hostname_is_valid() these days, as it just invoked that and checked the
name length was < 64. However, hostname_is_valid() checks the length
against HOST_NAME_MAX anyway (which is 64 on Linux), hence any
additional check is redundant.
We hence replace machine_name_is_valid() by a macro that simply maps it
to hostname_is_valid() but sets the allow_trailing_dot parameter to
false. We also move this this call to hostname-util.h, to the same place
as the hostname_is_valid() declaration.
|
|
Add more comments, and rename some parameters and variables to be more
expressive.
|
|
This moves is_gateway() from nss-myhostname into the basic APIs, and
makes it more like is_localhost(). Also, we rename it to
is_gateway_hostname() to make it more expressive.
Sharing this function in src/basic/ allows us to reuse the function for
routing name requests in resolved (in a later commit).
|
|
Fix machinectl login with containers in user namespaces (v2)
|
|
To be able to use `systemd-run` or `machinectl login` on a container
that is in a private user namespace, the sub-process must have entered
the user namespace before connecting to the container's D-Bus, otherwise
the UID and GID in the peer credentials are garbage.
So we extend namespace_open and namespace_enter to support UID namespaces,
and we enter the UID namespace in bus_container_connect_{socket,kernel}.
namespace_open will degrade to a no-op if user namespaces are not enabled
in the kernel.
Special handling is required for the setns call in namespace_enter with
a user namespace, since transitioning to your own namespace is forbidden,
as it would result in re-entering your user namespace as root.
Arguably it may be valid to check this at the call site, rather than
inside namespace_enter, but it is less code to do it inside, and if the
intention of calling namespace_enter is to *be* in the target namespace,
rather than to transition to the target namespace, it is a reasonable
approach.
The check for whether the user namespace is the same must happen before
entering namespaces, as we may not be able to access /proc during the
intermediate transition stage.
We can't instead attempt to enter the user namespace and then ignore
the failure from it being the same namespace, since the error code is
not distinct, and we can't compare namespaces while mid-transition.
|
|
Allow arbitrary file paths to be passed to nspawn (v3)
|
|
We should not fall back to dbus-1 and connect to the proxy when kdbus
returns an error that indicates that kdbus is running but just does not
accept new connections because of quota limits or something similar.
Using is_kdbus_available() in libsystemd/ requires it to move from
shared/ to libsystemd/.
Based on a patch from David Herrmann:
https://github.com/systemd/systemd/pull/886
|
|
This modifies the strv in-place, replacing strings with their escaped
version. It's mostly just a convenience function for when you need to
join a strv together because it's passed as a string to something, and
the separator needs escaping.
|
|
This is for shell-style \ escaping rather than quoting, which while it
has the same effect in produced shell commands, is not exclusively
useful for shell commands.
shell_escape would be useful for producing sed commands, as you would be
able to \ escape the normal special characters, plus whichever argument
separator was chosen; or it could be used to escape arguments passed to
the overlayfs mount command.
|
|
strv_split_extract is to strv_split_quotes as extract_first_word was to
unquote_first_word.
Now there's extract_first_word for extracting a single argument,
extract_many_words for extracting a bounded number of arguments,
and strv_split_extract for extracting an arbitrary number of arguments.
|
|
If EXTRACT_DONT_COALESCE_SEPARATORS is passed, then leading separators,
trailing separators and spans of multiple separators aren't skipped, and
empty arguments from before, after or between separators may be extracted.
|
|
This adds an EXTRACT_QUOTES option to allow the previous behaviour, of
not interpreting any character inside ' or " quotes as separators.
|
|
It now takes a separators argument, which defaults to WHITESPACE if NULL
is passed.
|
|
To add a flag to allow an empty string to be parsed as an argument, we
need to be able to distinguish between the end of the string, and after
the end of the string, so when we *do* reach the end, let's set *p to
this state.
|
|
Manual merge of https://github.com/systemd/systemd/pull/751.
|
|
|
|
All users are now setting lowercase=false.
|
|
Tests are modified to check behaviour with relax and without relax.
New tests are added for hostname_cleanup().
Tests are moved a new file (test-hostname-util) because there's
now a bunch of them.
New parameter is not used anywhere, except in tests, so there should
be no observable change.
|
|
networkd: save private-zone DHCP options
|
|
Alpha does not have a getpid syscall, but rather has getxpid to match
OSF/1.
|
|
- Add smack xattr lookup table
- Unify all of mac_smack_apply_xxx{_fd}() to mac_smack_apply() and
mac_smack_apply_fd().
- Add smack xattr read apis similar with apply apis as
mac_smack_read{_fd}().
|
|
To get xattr of given path or fd on newly allocated buffer, add new
helper api getxattr_malloc() and fgetxattr_malloc().
|
|
Similar in function to LIST_INSERT_AFTER, this will insert a new element
into the list before the specified position. If the specified position
is NULL, the element is added as the tail of the list.
|
|
add O_NONBLOCK to terminal handling
|
|
|
|
That's just handle this as a normal error.
|
|
|
|
In case of non-CLOCAL lines (i.e. those with carrier detect configured)
we shouldnt wait for a carrier if all we try to do is reset the TTY.
Hence, whenever we open such a TTY pass O_NONBLOCK.
Note that we continue to open ttys we intend to write to without
O_ONBLOCK, we only add it in cases we invoke ioctl()s or other terminal
operations without reading or writing to the device.
Fixes #835.
|
|
tree-wide: introduce mfree()
|
|
Pretty trivial helper which wraps free() but returns NULL, so we can
simplify this:
free(foobar);
foobar = NULL;
to this:
foobar = mfree(foobar);
|
|
busctl: Misc cleanups and a fix (v2)
|
|
In member_compare_func(), it compares interface, type and name of
members. But as it can contain NULL pointer, it needs to check them
before calling strcmp(). So make it as a separate strcmp_ptr
function (named after streq_ptr) so that it can be used by others.
Also let streq_ptr() to use it in order to make the code simpler.
|
