| Age | Commit message (Collapse) | Author |
|---|
|
Container managers frequently block name_to_handle_at(), returning
EACCES or EPERM when this is issued. Accept that, and simply fall back
to to fdinfo-based checks.
Note that we accept either EACCES or EPERM here, as container managers
can choose the error code and aren't very good on agreeing on just one.
(note that this is a non-issue with nspawn, as we permit
name_to_handle_at() there, only block open_by_handle_at(), which should
be sufficiently safe).
|
|
socket-util: introduce address_label_valid
|
|
networkd: add symlinks for Makefile (netdev and wait-online) , vxlan enhancements.
|
|
|
|
* Fix MIPS N64 and N32 LIB_ARCH_TUPLE
For mips, we have 3 major ABIs, they are N64, N32 and O32.
Both N32 and N64 defined __mips64__, and only N64 defined __LP64__.
|
|
Fix build failure on the tilegx architecture.
https://bugs.debian.org/856306
|
|
Revert "core: simplify cg_[all_]unified()" and more.
|
|
|
|
Let's just check the unified level, directly. There's really no value in
wrapping cg_unified_controllers() with this, i.e. potentially do string
comparison when there's no reason to.
Also, this makes the clal more alike cg_hybrid_unified().
|
|
We usually put the noun first, the verb (i.e. method) secont, for
example in cg_unified_flush(), let's follow the logic here...
|
|
cg_unified() is a bit generic a name, let's make clear that it checks
whether a specified controller is in unified mode.
|
|
We use our cgroup APIs in various contexts, including from our libraries
sd-login, sd-bus. As we don#t control those environments we can't rely
that the unified cgroup setup logic succeeds, and hence really shouldn't
assert on it.
This more or less reverts 415fc41ceaeada2e32639f24f134b1c248b9e43f.
|
|
Just a minor optimization.
|
|
This patch add support to test whether a internet
address is multicast or not.
|
|
Systemd controller on unified v2
|
|
We should mount the hybrid hierarchy if the user disabled the unified
hierarchy on the kernel command line.
|
|
/sys/fs/cgroups/unified on unified
If we encounter an error in proc cmdline parsing, just treat that as permanent,
i.e. the same as if the option was not specified. Realistically, it is better
to use the same condition for all related mounts, then to have e.g.
/sys/fs/cgroup mounted and /sys/fs/cgroup/unified not. If we find something is
mounted and base our answer on that, cache that result too.
Fix the conditions so that if "unified" is used, make sure any "hybrid" mounts
are not mounted.
|
|
We need this to gracefully support older or strangely configured kernels.
v2:
- do not install a callback handler, just embed the right conditions into
cg_is_*_wanted()
v3:
- fix bug in cg_is_legacy_wanted()
|
|
Less typing and doesn't make the table so incredibly wide.
|
|
test-env-util: fix typo leading to memleak
|
|
This reverts commit 18f71a3c8174774c5386c4aba94d54f3b5c36a84.
According to @keszybz we don't need this anymore, hence drop it:
https://github.com/systemd/systemd/pull/5131/commits/18f71a3c8174774c5386c4aba94d54f3b5c36a84#r102232368
|
|
Fixes: #5401
|
|
If the snippet aleady exists, don't do anything, as the file was already
installed then.
(This also reworks the code to create the file atomically)
Fixes: #5396
|
|
|
|
IN_SET(SIGCONT, SIGKILL) will always evaluate to false.
The signal needs to be included as the first argument.
Fixup for 26f417d3e8dd2522adfdc4c8fed4c36fa40f48fc.
|
|
|
|
|
|
Fixes #5405.
|
|
Environment generators
|
|
Sometimes it's useful to provide a default value during an environment
expansion, if the environment variable isn't already set.
For instance $XDG_DATA_DIRS is suppose to default to:
/usr/local/share/:/usr/share/
if it's not yet set. That means callers wishing to augment
XDG_DATA_DIRS need to manually add those two values.
This commit changes replace_env to support the following shell
compatible default value syntax:
XDG_DATA_DIRS=/foo:${XDG_DATA_DIRS:-/usr/local/share/:/usr/share}
Likewise, it's useful to provide an alternate value during an
environment expansion, if the environment variable isn't already set.
For instance, $LD_LIBRARY_PATH will inadvertently search the current
working directory if it starts or ends with a colon, so the following
is usually wrong:
LD_LIBRARY_PATH=/foo/lib:${LD_LIBRARY_PATH}
To address that, this changes replace_env to support the following
shell compatible alternate value syntax:
LD_LIBRARY_PATH=/foo/lib${LD_LIBRARY_PATH:+:${LD_LIBRARY_PATH}}
[zj: gate the new syntax under REPLACE_ENV_ALLOW_EXTENDED switch, so
existing callers are not modified.]
|
|
It's like replace_env, but lets you pass in a substring.
|
|
In the future we might want to allow additional syntax (for example
"unset VAR". But let's check that the data we're getting does not contain
anything unexpected.
|
|
(Only in environment.d files.)
We have only basic compatibility with shell syntax, but specifying variables
without using braces is probably more common, and I think a lot of people would
be surprised if this didn't work.
|
|
|
|
merge_env_file is a new function, that's like load_env_file, but takes a
pre-existing environment as an input argument. New environment entries are
merged. Variable expansion is performed.
Falling back to the process environment is supported (when a flag is set).
Alternatively this could be implemented as passing an additional fallback
environment array, but later on we're adding another flag to allow braceless
expansion, and the two flags can be combined in one arg, so there's less
stuff to pass around.
|
|
strempty() converts a NULL value to empty string, so
that it can be passed on to functions that don't support NULL.
replace_env calls strempty before passing its value on to strappend.
strappend supports NULL just fine, though, so this commit drops the
strempty call.
|
|
If an environment array has duplicates, strv_env_get_n returns
the results for the first match. This is wrong, because later
entries in the environment are supposed to replace earlier
entries.
|
|
Only tests are added, otherwise the new code is unused.
|
|
|
|
strv_env_replace was calling env_match(), which in effect allowed multiple
values for the same key to be inserted into the environment block. That's
pointless, because APIs to access variables only return a single value (the
latest entry), so it's better to keep the block clean, i.e. with just a single
entry for each key.
Add a new helper function that simply tests if the part before '=' is equal in
two strings and use that in strv_env_replace.
In load_env_file_push, use strv_env_replace to immediately replace the previous
assignment with a matching name.
Afaict, none of the callers are materially affected by this change, but it
seems like some pointless work was being done, if the same value was set
multiple times. We'd go through parsing and assigning the value for each
entry. With this change, we handle just the last one.
|
|
|
|
This protocol is generally useful, we might just as well reuse it for the
env. generators.
The implementation is changed a bit: instead of making a new strv and freeing
the old one, just mutate the original. This is much faster with larger arrays,
while in fact atomicity is preserved, since we only either insert the new
entry or not, without being in inconsistent state.
v2:
- fix confusion with return value
|
|
The output of processes can be gathered, and passed back to the callee.
(This commit just implements the basic functionality and tests.)
After the preparation in previous commits, the change in functionality is
relatively simple. For coding convenience, alarm is prepared *before* any
children are executed, and not before. This shouldn't matter usually, since
just forking of the children should be pretty quick. One could also argue that
this is more correct, because we will also catch the case when (for whatever
reason), forking itself is slow.
Three callback functions and three levels of serialization are used:
- from individual generator processes to the generator forker
- from the forker back to the main process
- deserialization in the main process
v2:
- replace an structure with an indexed array of callbacks
|
|
There is a slight change in behaviour: the user manager for root will create a
temporary file in /run/systemd, not /tmp. I don't think this matters, but
simplifies implementation.
|
|
This is pretty important, and we print this string during startup, so putting
the default hierarchy information might help with diagnosis if things go awry.
$ ./systemctl --version
systemd 232
+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN default-hierarchy=legacy
v2: make the message nicer by including the ./configure option argument
directly in output
|
|
The default default is set to "legacy", with "hybrid" and "unified"
being the other two alternatives.
There invert the behaviour for systemd.legacy_systemd_cgroup_controller:
if it is not specified on the kernel command line, "hybrid" is used if
selected as the default. If this option is specified, "hybrid" is used if false,
and full "legacy" if true.
Also make all fields in the configure summary lowercase (unless they are
capitalized names) for consistency.
v2:
- update for the fixed interpreation of systemd.legacy_systemd_cgroup_controller
|
|
v232's cgroup hybrid mode mounted v2 on /sys/fs/cgroup/systemd, which
unfortunately broke other tools which expect v1 there. From v233 on, hybrid
mode instead mounts and uses v2 on /sys/fs/cgroup/unified and keeps
/sys/fs/cgroup/systemd on v1 for compatibility with external tools. However,
to keep systemd live upgrades working, v233+ should be able to recognize v232
layout and keep using it.
This patch adds v232 hybrid mode support. If v232 layout is detected,
cg_unified(SYSTEMD_CGRouP_CONTROLLER) keeps returning %true but
cg_hybrid_unified() returns %false. This keeps process management on cgroup v2
but turns off the parallel layout.
|
|
hierarchy
Currently the hybrid mode mounts cgroup v2 on /sys/fs/cgroup instead of the v1
name=systemd hierarchy. While this works fine for systemd itself, it breaks
tools which expect cgroup v1 hierarchy on /sys/fs/cgroup/systemd.
This patch updates the hybrid mode so that it mounts v2 hierarchy on
/sys/fs/cgroup/unified and keeps v1 "name=systemd" hierarchy on
/sys/fs/cgroup/systemd for compatibility. systemd itself doesn't depend on the
"name=systemd" hierarchy at all. All operations take place on the v2 hierarchy
as before but the v1 hierarchy is kept in sync so that any tools which expect
it to be there can keep doing so. This allows systemd to take advantage of
cgroup v2 process management without requiring other tools to be aware of the
hybrid mode.
The hybrid mode is implemented by mapping the special systemd controller to
/sys/fs/cgroup/unified and making the basic cgroup utility operations -
cg_attach(), cg_create(), cg_rmdir() and cg_trim() - also operate on the
/sys/fs/cgroup/systemd hierarchy whenever the cgroup2 hierarchy is updated.
While a bit messy, this will allow dropping complications from using cgroup v1
for process management a lot sooner than otherwise possible which should make
it a net gain in terms of maintainability.
v2: Fixed !cgns breakage reported by @evverx and renamed the unified mount
point to /sys/fs/cgroup/unified as suggested by @brauner.
v3: chown the compat hierarchy too on delegation. Suggested by @evverx.
v4: [zj]
- drop the change to default, full "legacy" is still the default.
|
|
cg_is_unified_systemd_contoller_wanted
1d84ad944520fc3e062ef518c4db4e1 reversed the meaning of the option.
The kernel command line option has the opposite meaning to the function,
i.e. specifying "legacy=yes" means "unifed systemd controller=no".
|
|
SYSTEMD_CGROUP_CONTROLLER is currently defined as "name=systemd" which cgroup
utility functions interpret as a named cgroup hierarchy with the specified
named. With the planned cgroup hybrid mode changes, SYSTEMD_CGROUP_CONTROLLER
would map to different hierarchy names.
This patch makes SYSTEMD_CGROUP_CONTROLLER a special string "_systemd" which is
substituted to "name=systemd" by the cgroup utility functions. This allows the
callers to address the systemd hierarchy without actually specifying the
hierarchy name allowing the cgroup utility functions to map it to whatever is
appropriate.
Note that SYSTEMD_CGROUP_CONTROLLER was already special on full unified cgroup
hierarchy even before this patch.
|
