| Age | Commit message (Collapse) | Author |
|---|
|
It might be blocked through /proc/PID/setgroups
|
|
|
|
|
|
If the new item is inserted before the first item in the list, then the
head must be updated as well.
Add a test to the list unit test to check for this.
|
|
core:sandbox: Add new ProtectKernelTunables=, ProtectControlGroups=, ProtectSystem=strict and fixes
|
|
Show and formatting fixes
|
|
Even if
```
cat /proc/sys/net/ipv6/conf/all/disable_ipv6
1
```
is disabled
cat /proc/net/sockstat6
```
TCP6: inuse 2
UDP6: inuse 1
UDPLITE6: inuse 0
RAW6: inuse 0
FRAG6: inuse 0 memory 0
```
Looking for /proc/net/if_inet6 is the right choice.
|
|
This adds logic to chase symlinks for all mount points that shall be created in
a namespace environment in userspace, instead of leaving this to the kernel.
This has the advantage that we can correctly handle absolute symlinks that
shall be taken relative to a specific root directory. Moreover, we can properly
handle mounts created on symlinked files or directories as we can merge their
mounts as necessary.
(This also drops the "done" flag in the namespace logic, which was never
actually working, but was supposed to permit a partial rollback of the
namespace logic, which however is only mildly useful as it wasn't clear in
which case it would or would not be able to roll back.)
Fixes: #3867
|
|
Previously, if ReadWritePaths= was nested inside a ReadOnlyPaths=
specification, then we'd first recursively apply the ReadOnlyPaths= paths, and
make everything below read-only, only in order to then flip the read-only bit
again for the subdirs listed in ReadWritePaths= below it.
This is not only ugly (as for the dirs in question we first turn on the RO bit,
only to turn it off again immediately after), but also problematic in
containers, where a container manager might have marked a set of dirs read-only
and this code will undo this is ReadWritePaths= is set for any.
With this patch behaviour in this regard is altered: ReadOnlyPaths= will not be
applied to the children listed in ReadWritePaths= in the first place, so that
we do not need to turn off the RO bit for those after all.
This means that ReadWritePaths=/ReadOnlyPaths= may only be used to turn on the
RO bit, but never to turn it off again. Or to say this differently: if some
dirs are marked read-only via some external tool, then ReadWritePaths= will not
undo it.
This is not only the safer option, but also more in-line with what the man page
currently claims:
"Entries (files or directories) listed in ReadWritePaths= are
accessible from within the namespace with the same access rights as
from outside."
To implement this change bind_remount_recursive() gained a new "blacklist"
string list parameter, which when passed may contain subdirs that shall be
excluded from the read-only mounting.
A number of functions are updated to add more debug logging to make this more
digestable.
|
|
This adds a new call get_user_creds_clean(), which is just like
get_user_creds() but returns NULL in the home/shell parameters if they contain
no useful information. This code previously lived in execute.c, but by
generalizing this we can reuse it in run.c.
|
|
Also some trivial tests for STR_IN_SET and STRPTR_IN_SET.
|
|
Network file dropins
|
|
In preparation for adding a version which takes a strv.
|
|
condition: ignore nanoseconds in timestamps for ConditionNeedsUpdate=
Fixes #4130.
|
|
|
|
Strerror removal and other janitorial cleanups
|
|
We were already unconditionally using the unicode character when the
input string was not pure ASCII, leading to different behaviour in
depending on the input string.
systemd[1]: Starting printit.service.
python3[19962]: foooooooooooooooooooooooooooooooooooo…oooo
python3[19964]: fooąęoooooooooooooooooooooooooooooooo…oooo
python3[19966]: fooąęoooooooooooooooooooooooooooooooo…ąęąę
python3[19968]: fooąęoooooooooooooooooąęąęąęąęąęąęąęą…ąęąę
systemd[1]: Started printit.service.
|
|
According to its manual page, flags given to mkostemp(3) shouldn't include
O_RDWR, O_CREAT or O_EXCL flags as these are always included. Beyond
those, the only flag that all callers (except a few tests where it
probably doesn't matter) use is O_CLOEXEC, so set that unconditionally.
|
|
This splits the OS field in two : one for the distribution name
and one for the the version id.
Dashes are written for missing fields.
This also prints ip addresses of known machines. The `--max-addresses`
option specifies how much ip addresses we want to see. The default is 1.
When more than one address is written for a machine, a `,` follows it.
If there are more ips than `--max-addresses`, `...` follows the last
address.
|
|
fileio makes use of O_TMPFILE when it is available.
We now always have O_TMPFILE, defined in missing.h if missing
from the toolchain headers.
Have fileio include missing.h and drop the guards around the
use of O_TMPFILE.
|
|
Currently, a missing __O_TMPFILE was only defined for i386 and x86_64,
leaving any other architectures with an "old" toolchain fail miserably
at build time:
src/import/export-raw.c: In function 'reflink_snapshot':
src/import/export-raw.c:271:26: error: 'O_TMPFILE' undeclared (first use in this function)
new_fd = open(d, O_TMPFILE|O_CLOEXEC|O_NOCTTY|O_RDWR, 0600);
^
__O_TMPFILE (and O_TMPFILE) are available since glibc 2.19. However, a
lot of existing toolchains are still using glibc-2.18, and some even
before that, and it is not really possible to update those toolchains.
Instead of defining it only for i386 and x86_64, define __O_TMPFILE
with the specific values for those archs where it is different from the
generic value. Use the values as found in the Linux kernel (v4.8-rc3,
current as of time of commit).
---
Note: tested on ARM (build+run), with glibc-2.18 and linux headers 3.12.
Untested on other archs, though (I have no board to test this).
Changes v1 -> v2:
- add a comment specifying some are hexa, others are octal.
|
|
|
|
After the call of the isatty() we check its result twice in the
open_terminal(). There are no sense to check result of isatty() that
it is less than zero and return -errno, because as described in
documentation:
isatty() returns 1 if fd is an open file descriptor referring to a
terminal; otherwise 0 is returned, and errno is set to indicate the
error.
So it can't be less than zero.
|
|
add a new tool for creating transient mount and automount units
|
|
Rework console color setup
|
|
This changes the semantics a bit: before, SYSTEMD_COLORS= would be treated as
"yes", same as SYSTEMD_COLORS=xxx and SYSTEMD_COLORS=1, and only
SYSTEMD_COLORS=0 would be treated as "no". Now, only valid booleans are treated
as "yes". This actually matches how $SYSTEMD_COLORS was announced in NEWS.
|
|
When started by the kernel, we are connected to the console, and we'll set TERM
properly to some value in fixup_environment(). We'll then enable or disable
colors based on the value of $SYSTEMD_COLORS and $TERM.
When reexecuting, TERM should be already set, so we can use this value.
Effectively, behaviour is the same as before affd7ed1a was reverted, but instead
of reopening the console before configuring color output, we just ignore what
stdout is connected to and decide based on the variables only.
|
|
Journald dynamic users
|
|
Dynamic users should be treated like system users, and their logs
should end up in the main system journal.
|
|
The parsing functions for [User]TasksMax were inconsistent. Empty string and
"infinity" were interpreted as no limit for TasksMax but not accepted for
UserTasksMax. Update them so that they're consistent with other knobs.
* Empty string indicates the default value.
* "infinity" indicates no limit.
While at it, replace opencoded (uint64_t) -1 with CGROUP_LIMIT_MAX in TasksMax
handling.
v2: Update empty string to indicate the default value as suggested by Zbigniew
Jędrzejewski-Szmek.
v3: Fixed empty UserTasksMax handling.
|
|
Rework 17eb9a9ddba3f03fcba33445c1c1eedeb948da04 a bit.
Let's make sure we don't clobber the input parameter args[1], following our
coding style to not clobber parameters unless explicitly indicated. (in
particular, as we don't want to have our changes appear in the command line
shown in "ps"...)
No functional change.
|
|
This adds "systemd-mount" which is for transient mount and automount units what
"systemd-run" is for transient service, scope and timer units.
The tool allows establishing mounts and automounts during runtime. It is very
similar to the usual /bin/mount commands, but can pull in additional
dependenices on access (for example, it pulls in fsck automatically), an take
benefit of the automount logic.
This tool is particularly useful for mount removable file systems (such as USB
sticks), as the automount logic (together with automatic unmount-on-idle), as
well as automatic fsck on first access ensure that the removable file system
has a high chance to remain in a fully clean state even when it is unplugged
abruptly, and returns to a clean state on the next re-plug.
This is a follow-up for #2471, as it adds a simple client-side for the
transient automount logic added in that PR.
In later work it might make sense to invoke this tool automatically from udev
rules in order to implement a simpler and safer version of removable media
management á la udisks.
|
|
Currently, systemd uses either the legacy hierarchies or the unified hierarchy.
When the legacy hierarchies are used, systemd uses a named legacy hierarchy
mounted on /sys/fs/cgroup/systemd without any kernel controllers for process
management. Due to the shortcomings in the legacy hierarchy, this involves a
lot of workarounds and complexities.
Because the unified hierarchy can be mounted and used in parallel to legacy
hierarchies, there's no reason for systemd to use a legacy hierarchy for
management even if the kernel resource controllers need to be mounted on legacy
hierarchies. It can simply mount the unified hierarchy under
/sys/fs/cgroup/systemd and use it without affecting other legacy hierarchies.
This disables a significant amount of fragile workaround logics and would allow
using features which depend on the unified hierarchy membership such bpf cgroup
v2 membership test. In time, this would also allow deleting the said
complexities.
This patch updates systemd so that it prefers the unified hierarchy for the
systemd cgroup controller hierarchy when legacy hierarchies are used for kernel
resource controllers.
* cg_unified(@controller) is introduced which tests whether the specific
controller in on unified hierarchy and used to choose the unified hierarchy
code path for process and service management when available. Kernel
controller specific operations remain gated by cg_all_unified().
* "systemd.legacy_systemd_cgroup_controller" kernel argument can be used to
force the use of legacy hierarchy for systemd cgroup controller.
* nspawn: By default nspawn uses the same hierarchies as the host. If
UNIFIED_CGROUP_HIERARCHY is set to 1, unified hierarchy is used for all. If
0, legacy for all.
* nspawn: arg_unified_cgroup_hierarchy is made an enum and now encodes one of
three options - legacy, only systemd controller on unified, and unified. The
value is passed into mount setup functions and controls cgroup configuration.
* nspawn: Interpretation of SYSTEMD_CGROUP_CONTROLLER to the actual mount
option is moved to mount_legacy_cgroup_hierarchy() so that it can take an
appropriate action depending on the configuration of the host.
v2: - CGroupUnified enum replaces open coded integer values to indicate the
cgroup operation mode.
- Various style updates.
v3: Fixed a bug in detect_unified_cgroup_hierarchy() introduced during v2.
v4: Restored legacy container on unified host support and fixed another bug in
detect_unified_cgroup_hierarchy().
|
|
A following patch will update cgroup handling so that the systemd controller
(/sys/fs/cgroup/systemd) can use the unified hierarchy even if the kernel
resource controllers are on the legacy hierarchies. This would require
distinguishing whether all controllers are on cgroup v2 or only the systemd
controller is. In preparation, this patch renames cg_unified() to
cg_all_unified().
This patch doesn't cause any functional changes.
|
|
core: add cgroup CPU controller support on the unified hierarchy
(zj: merging not squashing to make it clear against which upstream this patch was developed.)
|
|
Unfortunately, due to the disagreements in the kernel development community,
CPU controller cgroup v2 support has not been merged and enabling it requires
applying two small out-of-tree kernel patches. The situation is explained in
the following documentation.
https://git.kernel.org/cgit/linux/kernel/git/tj/cgroup.git/tree/Documentation/cgroup-v2-cpu.txt?h=cgroup-v2-cpu
While it isn't clear what will happen with CPU controller cgroup v2 support,
there are critical features which are possible only on cgroup v2 such as
buffered write control making cgroup v2 essential for a lot of workloads. This
commit implements systemd CPU controller support on the unified hierarchy so
that users who choose to deploy CPU controller cgroup v2 support can easily
take advantage of it.
On the unified hierarchy, "cpu.weight" knob replaces "cpu.shares" and "cpu.max"
replaces "cpu.cfs_period_us" and "cpu.cfs_quota_us". [Startup]CPUWeight config
options are added with the usual compat translation. CPU quota settings remain
unchanged and apply to both legacy and unified hierarchies.
v2: - Error in man page corrected.
- CPU config application in cgroup_context_apply() refactored.
- CPU accounting now works on unified hierarchy.
|
|
beef up /var/tmp and /tmp handling; set $SERVICE_RESULT/$EXIT_CODE/$EXIT_STATUS on ExecStop= and make sure root/nobody are always resolvable
|
|
Fix 3607
|
|
This adds parse_nice() that parses a nice level and ensures it is in the right
range, via a new nice_is_valid() helper. It then ports over a number of users
to this.
No functional changes.
|
|
The intention is to clamp the value to READ_FULL_BYTES_MAX, which
would be the minimum of the two.
|
|
|
|
read_full_stream() _always_ allocated twice the memory needed, due to
only breaking the realloc() && fread() loop when fread() returned 0,
requiring another iteration and exponentially enlarged buffer just to
discover the EOF condition.
This also caused file sizes >2MiB && <= 4MiB to erroneously be treated
as E2BIG, due to the inappropriately doubled buffer size exceeding
4*1024*1024.
Also made the 4*1024*1024 magic number a READ_FULL_BYTES_MAX constant.
|
|
Beef up the existing var_tmp() call, rename it to var_tmp_dir() and add a
matching tmp_dir() call (the former looks for the place for /var/tmp, the
latter for /tmp).
Both calls check $TMPDIR, $TEMP, $TMP, following the algorithm Python3 uses.
All dirs are validated before use. secure_getenv() is used in order to limite
exposure in suid binaries.
This also ports a couple of users over to these new APIs.
The var_tmp() return parameter is changed from an allocated buffer the caller
will own to a const string either pointing into environ[], or into a static
const buffer. Given that environ[] is mostly considered constant (and this is
exposed in the very well-known getenv() call), this should be OK behaviour and
allows us to avoid memory allocations in most cases.
Note that $TMPDIR and friends override both /var/tmp and /tmp usage if set.
|
|
This permits CPUQuota to accept greater values as documented.
|
|
nspawn resolv.conf handling improvements, and inherit $TERM all the way through nspawn → console login
|
|
This patch improves parsing and generation of timestamps and calendar
specifications in two ways:
- The week day is now always printed in the abbreviated English form, instead
of the locale's setting. This makes sure we can always parse the week day
again, even if the locale is changed. Given that we don't follow locale
settings for printing timestamps in any other way either (for example, we
always use 24h syntax in order to make uniform parsing possible), it only
makes sense to also stick to a generic, non-localized form for the timestamp,
too.
- When parsing a timestamp, the local timezone (in its DST or non-DST name)
may be specified, in addition to "UTC". Other timezones are still not
supported however (not because we wouldn't want to, but mostly because libc
offers no nice API for that). In itself this brings no new features, however
it ensures that any locally formatted timestamp's timezone is also parsable
again.
These two changes ensure that the output of format_timestamp() may always be
passed to parse_timestamp() and results in the original input. The related
flavours for usec/UTC also work accordingly. Calendar specifications are
extended in a similar way.
The man page is updated accordingly, in particular this removes the claim that
timestamps systemd prints wouldn't be parsable by systemd. They are now.
The man page previously showed invalid timestamps as examples. This has been
removed, as the man page shouldn't be a unit test, where such negative examples
would be useful. The man page also no longer mentions the names of internal
functions, such as format_timestamp_us() or UNIX error codes such as EINVAL.
|
|
This way, invoking nspawn from a shell in the best case inherits the TERM
setting all the way down into the login shell spawned in the container.
Fixes: #3697
|
|
Update documentation for systemd-vconsole-setup
|
|
The CPUID and DMI vendor strings do not seem to be documented.
Values were found experimentally and by inspecting the source code.
|
|
In this patch "enabled" and "disabled" is used exclusively, but "enable" and
"disable" forms are need for the following patch.
|
