summaryrefslogtreecommitdiff
path: root/src/bus-proxyd/bus-proxyd.c
AgeCommit message (Collapse)Author
2015-08-27Revert "sd-bus: do not connect to dbus-1 socket when kdbus is available"David Herrmann
This reverts commit d4d00020d6ad855d65d31020fefa5003e1bb477f. The idea of the commit is broken and needs to be reworked. We really cannot reduce the bus-addresses to a single address. We always will have systemd with native clients and legacy clients at the same time, so we also need both addresses at the same time.
2015-08-11 sd-bus: do not connect to dbus-1 socket when kdbus is availableKay Sievers
We should not fall back to dbus-1 and connect to the proxy when kdbus returns an error that indicates that kdbus is running but just does not accept new connections because of quota limits or something similar. Using is_kdbus_available() in libsystemd/ requires it to move from shared/ to libsystemd/. Based on a patch from David Herrmann: https://github.com/systemd/systemd/pull/886
2015-06-17turn kdbus support into a runtime optionKay Sievers
./configure --enable/disable-kdbus can be used to set the default behavior regarding kdbus. If no kdbus kernel support is available, dbus-dameon will be used. With --enable-kdbus, the kernel command line option "kdbus=0" can be used to disable kdbus. With --disable-kdbus, the kernel command line option "kdbus=1" is required to enable kdbus support.
2015-04-10shared: add formats-util.hRonny Chevalier
2015-03-03bus-proxyd: avoid logging oom twiceZbigniew Jędrzejewski-Szmek
2015-02-23remove unused includesThomas Hindoe Paaboel Andersen
This patch removes includes that are not used. The removals were found with include-what-you-use which checks if any of the symbols from a header is in use.
2015-02-13bus-proxy: a few simplificationsLennart Poettering
2015-02-13bus-proxy: close each connection fd only onceLennart Poettering
After passing the fds over to the sd_bus object, we should forget them, so that we don't close them a second time when the object goes away.
2015-02-12include <poll.h> instead of <sys/poll.h>Thomas Hindoe Paaboel Andersen
include-what-you-use automatically does this and it makes finding unnecessary harder to spot. The only content of poll.h is a include of sys/poll.h so should be harmless.
2015-01-18bus-proxy: fix bus-uid trackingDavid Herrmann
We need to implicitly allow HELLO from users with the same uid as the bus. Fix the bus-uid tracking to use the original uid, not the uid after privilege-dropping.
2015-01-17bus-proxy: drop privileges if run as rootDavid Herrmann
We cannot use "User=" in unit-files if we want to retain privileges. So make bus-proxy.c explicitly drop privileges. However, only do that if we're root, as there is no need to drop it on the user-bus.
2015-01-17bus-proxy: share policy between threadsDavid Herrmann
This implements a shared policy cache with read-write locks. We no longer parse the XML policy in each thread. This will allow us to easily implement ReloadConfig().
2015-01-17bus-proxy: set custom thread namesDavid Herrmann
Set thread-names to "p$PIDu$UID" and suffix with '*' if truncated. This helps debugging bus-proxy issues if we want to figure out which connections are currently open.
2015-01-17bus-proxy: turn into multi-threaded daemonDavid Herrmann
Instead of using Accept=true and running one proxy for each connection, we now run one proxy-daemon with a thread per connection. This will enable us to share resources like policies in the future.
2015-01-17bus-proxy: extract proxy into Proxy objectDavid Herrmann
Move all the proxy code into a "struct Proxy" object that can be used from multiple binaries. We now dropped SMACK as we have to refactor it to work properly. We can introduce it later on.
2015-01-17bus-proxy: refactor bus-creationDavid Herrmann
Move local and destination bus creation into a helper function. This further reduces the line count of main().
2015-01-15bus-proxyd: move synthesize_name_acquired()Daniel Mack
Move synthesize_name_acquired() to synthesize.c.
2015-01-15bus-proxy: factor out code for driver handling and message synthesisDaniel Mack
Move synthesize_*() into synthesize.c and bus_proxy_process_driver() into driver.c for better code separation.
2015-01-11bus-proxy: print message direction in policy logsDavid Herrmann
Make sure to print "dbus-1 to kernel" or "kernel to dbus-1" in policy logs to better diagnose the situation.
2015-01-11bus-proxy: fix receiver policy on dbus-1 to kdbus signalsDavid Herrmann
If a dbus-1 client sends a broadcasted signal via the bus-proxy to kdbus, the bus-proxy has no idea who the receiver is. Classic dbus-daemon has bus-access and can perform policy checks for each receiver, but we cant. Instead, we know the kernel will perform receiver policy checks for broadcasts, so we can skip the policy check and just push it into the kernel. This fixes wpa_supplicant which has DENY rules on receive_type=signal for non-root. As we never know the target, we always DENY all broadcasts from wpa_supplicant. Note that will still perform receiver-policy checks for signals that we get from the kernel back to us. In those cases, we know the receiver (which is us).
2015-01-11bus-proxy: fix policy for expected/non-expected reply tagsDavid Herrmann
dbus-1 distinguishes expected and non-expected replies. An expected reply is a reply that is sent as answer to a previously forwarded method-call before the timeout fires. Those replies are, by default, forwarded and DENY policy tags are ignored on them (unless explicitly stated otherwise). We don't track reply-windows in the bus-proxy as the kernel already does this. Furthermore, the kernel prohibits any non-expected replies (which breaks dbus-1, but it was an odd feature, anyway). Therefore, skip policy checks on replies and always let the kernel deal with it! To be correct, we should still process DENY tags marked as send_expected_reply=true (which is *NOT* the default!). However, so far we don't parse those attributes, and no-one really uses it, so lets not implement it for now. It's marked as TODO if anyone feels like fixing it.
2015-01-09bus-proxy: make sure we have creds when two legacy clients talk to each otherLennart Poettering
2015-01-09bus-proxy: dbus-daemon implies that connections from UIDs that are identical ↵Lennart Poettering
to the bus owner should be allowed Hence, copy this behaviour for bus-proxy too.
2015-01-08bus-proxyd: fix EPERM on repliesDavid Herrmann
Imagine a kdbus peer sending a method-call without EXPECT_REPLY set through the proxy to a dbus1 peer. The proxy turns the missing EXPECT_REPLY flag into a dbus1 NO_REPLY_EXPECTED flag. However, if the receipient ignores that flag (valid dbus1 behavior) and sends a reply, the proxy will try to forward it to the original peer. This will fail with EPERM as the kernel didn't track the reply. We have two options now: Either we ignore EPERM for reply messages, or we track reply-windows in the proxy so we can properly ignore replies if EXPECT_REPLY wasn't set. This commit chose the first option: ignore EPERM for replies. The only down-side is that replies without matching method call will no longer be forwarded by the proxy. This works on dbus1, though. Nobody sane does this, so lets ignore it.
2015-01-08bus-proxyd: optimize replies if they're not requestedDavid Herrmann
If a caller does not request a reply, dont send it. This skips message creation and speeds up NO_REPLY_EXPECTED cases. Note that sd-bus still handles this case internally, but if we handle it in bus-proxyd, we can skip the whole message creation step.
2015-01-08bus-proxy: augment credentials from /proc for cmdline updateDavid Herrmann
dbus1 does not provide cmdline, so we have to augment our credentials from /proc to beautify the bus-proxyd cmdline. We dont use this for anything but beautification, so there shouldn't be any problems due to /proc pid-recycling races. This fixes bus-proxyd to no longer display 'xxxxxxxxxxxxxxxxxxxxxxxxxxx' in its cmdline.
2015-01-07sd-bus: always catch name requests for the special names ↵Lennart Poettering
"org.freedesktop.DBus" and "org.freedesktop.DBus.Local" and refuse them
2015-01-05bus-proxyd: don't allow to acquire org.freedesktop.DBus nameLukasz Skalski
2015-01-05machined,bus-proxy: fix connecting to containersLennart Poettering
2014-12-30tree-wide: spelling fixesVeres Lajos
https://github.com/vlajos/misspell_fixer https://github.com/torstehu/systemd/commit/b6fdeb618cf2f3ce1645b3315f15f482710c7ffa Thanks to Torstein Husebo <torstein@huseboe.net>.
2014-12-29bus-proxy: fix sd_bus_reply_*() usageDavid Herrmann
We *must* not use sd_bus_reply_*() as it does not set the sender field correctly. Use the synthetic_reply_*() helpers instead!
2014-12-23core: rearrange code so that libsystemd/sd-bus/ does not include header ↵Lennart Poettering
files from core Stuff in src/shared or src/libsystemd should *never* include code from src/core or any of the tools, so don't do that here either. It's not OK!
2014-12-23bus-proxyd: ignore errors from sd_bus_creds_get_well_known_names()Daniel Mack
sd_bus_creds_get_well_known_names() fails with -ENODATA in case the message has no names attached, which is intended behavior if the remote connection didn't own any names at the time of sending. The function already deals with 'sender_names' being an empty strv, so we can just continue in such cases.
2014-12-23bus-proxyd: handle -ESRCH and -ENXIO gracefullyDaniel Mack
Messages to destinations that are not currently owned by any bus connection will cause kdbus related function to return with either -ENXIO or -ESRCH. Such conditions should not make the proxyd terminate but send a sane SD_BUS_ERROR_NAME_HAS_NO_OWNER error reply to the proxied connection.
2014-12-09bus-proxy: cloning smack labelPrzemyslaw Kedzierski
When dbus client connects to systemd-bus-proxyd through Unix domain socket proxy takes client's smack label and sets for itself. It is done before and independent of dropping privileges. The reason of such soluton is fact that tests of access rights performed by lsm may take place inside kernel, not only in userspace of recipient of message. The bus-proxyd needs CAP_MAC_ADMIN to manipulate its label. In case of systemd running in system mode, CAP_MAC_ADMIN should be added to CapabilityBoundingSet in service file of bus-proxyd. In case of systemd running in user mode ('systemd --user') it can be achieved by addition Capabilities=cap_mac_admin=i and SecureBits=keep-caps to user@.service file and setting cap_mac_admin+ei on bus-proxyd binary.
2014-12-08bus-proxy: fix compat with autostarted servicesLennart Poettering
2014-12-02bus-proxy: don't log bus policy every single time we runLennart Poettering
2014-11-28treewide: introduce UID_INVALID (and friends) as macro for (uid_t) -1Lennart Poettering
2014-11-28sd-bus: rename sd_bus_get_owner_id() → sd_bus_get_bus_id()Lennart Poettering
The ID returned really doesn't identify the owner, but the bus instance, hence fix this misnaming. Also, update "busctl status" to show the ID in its output.
2014-11-28treewide: use log_*_errno whenever %m is in the format stringMichal Schmidt
If the format string contains %m, clearly errno must have a meaningful value, so we might as well use log_*_errno to have ERRNO= logged. Using: find . -name '*.[ch]' | xargs sed -r -i -e \ 's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/' Plus some whitespace, linewrap, and indent adjustments.
2014-11-28treewide: more log_*_errno + return simplificationsMichal Schmidt
2014-11-28bus-proxy: automatically detect scope of bus and derive which XML snippets ↵Lennart Poettering
to load from that
2014-11-28sd-bus: rename default bus address constants, they aren't "paths" but ↵Lennart Poettering
"addresses"
2014-11-28sd-bus: rework credential query logicLennart Poettering
Also, make the call to free kdbus slices generic and use it everywhere
2014-11-28treewide: no need to negate errno for log_*_errno()Michal Schmidt
It corrrectly handles both positive and negative errno values.
2014-11-28treewide: auto-convert the simple cases to log_*_errno()Michal Schmidt
As a followup to 086891e5c1 "log: add an "error" parameter to all low-level logging calls and intrdouce log_error_errno() as log calls that take error numbers", use sed to convert the simple cases to use the new macros: find . -name '*.[ch]' | xargs sed -r -i -e \ 's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/' Multi-line log_*() invocations are not covered. And we also should add log_unit_*_errno().
2014-11-27bus-proxy: beef up policy enforcementLennart Poettering
- actually return permission errors to clients - use the right ucreds field - fix error paths when we cannot keep track of locally acquired names due to OOM - avoid unnecessary global variables - log when the policy denies access - enforce correct policy rule order - always request all the metadata its we need to make decisions
2014-11-27bus-proxy: check passed parameter signature of all driver method callsLennart Poettering
2014-11-25sd-bus: update to current kernel version, by splitting off the extended ↵Lennart Poettering
KDBUS_ITEM_PIDS structure from KDBUS_ITEM_CREDS Also: - adds support for euid, suid, fsuid, egid, sgid, fsgid fields. - makes augmentation of creds with data from /proc explicitly controllable to give apps better control over this, given that this is racy. - enables augmentation for kdbus connections (previously we only did it for dbus1). This is useful since with recent kdbus versions it is possible for clients to control the metadata they want to send. - changes sd_bus_query_sender_privilege() to take the euid of the client into consideration, if known - when we don't have permissions to read augmentation data from /proc, don't fail, just don't add the data in
2014-11-14bus-proxy: avoid redundant name validity checksLennart Poettering
Our API calls check the validity of bus names anyway, hence we don't have to do this before calling them...