summaryrefslogtreecommitdiff
path: root/src/cgtop
AgeCommit message (Collapse)Author
2016-06-06cgtop: fix ret pointer usage (#3443)Alessandro Puccetti
2016-06-05cgtop: add option to show a single cgroup subtree (#3413)Alessandro Puccetti
When many services are running, it was difficult to see only the interesting ones. This patch allows to show only the subtree of interest.
2016-05-30pager: don't start pager if the terminal is explicitly set to TERM=dumbLennart Poettering
As suggested here: https://bugs.freedesktop.org/show_bug.cgi?id=64737#c8 This adds a new call terminal_is_dumb() and makes use of this where appropriate.
2016-05-05core: add io controller support on the unified hierarchyTejun Heo
On the unified hierarchy, blkio controller is renamed to io and the interface is changed significantly. * blkio.weight and blkio.weight_device are consolidated into io.weight which uses the standardized weight range [1, 10000] with 100 as the default value. * blkio.throttle.{read|write}_{bps|iops}_device are consolidated into io.max. Expansion of throttling features is being worked on to support work-conserving absolute limits (io.low and io.high). * All stats are consolidated into io.stats. This patchset adds support for the new interface. As the interface has been revamped and new features are expected to be added, it seems best to treat it as a separate controller rather than trying to expand the blkio settings although we might add automatic translation if only blkio settings are specified. * io.weight handling is mostly identical to blkio.weight[_device] handling except that the weight range is different. * Both read and write bandwidth settings are consolidated into CGroupIODeviceLimit which describes all limits applicable to the device. This makes it less painful to add new limits. * "max" can be used to specify the maximum limit which is equivalent to no config for max limits and treated as such. If a given CGroupIODeviceLimit doesn't contain any non-default configs, the config struct is discarded once the no limit config is applied to cgroup. * lookup_blkio_device() is renamed to lookup_block_device(). Signed-off-by: Tejun Heo <htejun@fb.com>
2016-04-28cgtop: initialize `ours' to NULL properly (#3139)Naohiro Aota
Running cgtop on a system, which lacks expecting stat file, results in a segfault. For example, a system with blkio tree but without cfq io scheduler, lacks "blkio.io_service_bytes". When the targeting cgroup's file does not exist, process() returns 0 and also does not modify `*ret' value (which is `*ours'). As a result, callers of refresh_one() can have bogus pointer, which result in SEGV. This patch just properly initialize the variable to NULL.
2016-02-13tree-wide: make more global variables staticLennart Poettering
let's export as little as we can
2016-02-10tree-wide: remove Emacs lines from all filesDaniel Mack
This should be handled fine now by .dir-locals.el, so need to carry that stuff in every file.
2016-01-12tree-wide: use xsprintf() where applicableDaniel Mack
Also add a coccinelle receipt to help with such transitions.
2015-11-27tree-wide: expose "p"-suffix unref calls in public APIs to make gcc cleanup easyLennart Poettering
GLIB has recently started to officially support the gcc cleanup attribute in its public API, hence let's do the same for our APIs. With this patch we'll define an xyz_unrefp() call for each public xyz_unref() call, to make it easy to use inside a __attribute__((cleanup())) expression. Then, all code is ported over to make use of this. The new calls are also documented in the man pages, with examples how to use them (well, I only added docs where the _unref() call itself already had docs, and the examples, only cover sd_bus_unrefp() and sd_event_unrefp()). This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we tend to call our destructors these days. Note that this defines no public macro that wraps gcc's attribute and makes it easier to use. While I think it's our duty in the library to make our stuff easy to use, I figure it's not our duty to make gcc's own features easy to use on its own. Most likely, client code which wants to make use of this should define its own: #define _cleanup_(function) __attribute__((cleanup(function))) Or similar, to make the gcc feature easier to use. Making this logic public has the benefit that we can remove three header files whose only purpose was to define these functions internally. See #2008.
2015-10-27util-lib: split out allocation calls into alloc-util.[ch]Lennart Poettering
2015-10-27util-lib: split string parsing related calls from util.[ch] into parse-util.[ch]Lennart Poettering
2015-10-25util-lib: split out fd-related operations into fd-util.[ch]Lennart Poettering
There are more than enough to deserve their own .c file, hence move them over.
2015-09-29bus-util: rename bus_open_transport() to bus_connect_transport()Lennart Poettering
In sd-bus, the sd_bus_open_xyz() family of calls allocates a new bus, while sd_bus_default_xyz() family tries to reuse the thread's default bus. bus_open_transport() sometimes internally uses the former, sometimes the latter family, but suggests it only calls the former via its name. Hence, let's avoid this confusion, and generically rename the call to bus_connect_transport(). Similar for all related calls. And while we are at it, also change cgls + cgtop to do direct systemd connections where possible, since all they do is talk to systemd itself.
2015-09-29util: introduce common version() implementation and use it everywhereLennart Poettering
This also allows us to drop build.h from a ton of files, hence do so. Since we touched the #includes of those files, let's order them properly according to CODING_STYLE.
2015-09-22cgtop: make sure help text doesn't cause main contents to moveLennart Poettering
Let's always keep space for the full help text. (We used to do that, but recently another line of help was added which broke this.)
2015-09-22cgtop: underline table headerLennart Poettering
Let's underline the header line of the table shown by cgtop, how it is customary for tables. In order to do this, let's introduce new ANSI underline macros, and clean up the existing ones as side effect.
2015-09-21cgtop: add -M/--machineEvgeny Vereshchagin
2015-09-10Merge pull request #1239 from poettering/cgroup-pidsDaniel Mack
core: add support for the "pids" cgroup controller
2015-09-10core: add support for the "pids" cgroup controllerLennart Poettering
This adds support for the new "pids" cgroup controller of 4.3 kernels. It allows accounting the number of tasks in a cgroup and enforcing limits on it. This adds two new setting TasksAccounting= and TasksMax= to each unit, as well as a gloabl option DefaultTasksAccounting=. This also updated "cgtop" to optionally make use of the new kernel-provided accounting. systemctl has been updated to show the number of tasks for each service if it is available. This patch also adds correct support for undoing memory limits for units using a MemoryLimit=infinity syntax. We do the same for TasksMax= now and hence keep things in sync here.
2015-09-10tree-wide: never use the off_t unless glibc makes us use itLennart Poettering
off_t is a really weird type as it is usually 64bit these days (at least in sane programs), but could theoretically be 32bit. We don't support off_t as 32bit builds though, but still constantly deal with safely converting from off_t to other types and back for no point. Hence, never use the type anymore. Always use uint64_t instead. This has various benefits, including that we can expose these values directly as D-Bus properties, and also that the values parse the same in all cases.
2015-09-01core: unified cgroup hierarchy supportLennart Poettering
This patch set adds full support the new unified cgroup hierarchy logic of modern kernels. A new kernel command line option "systemd.unified_cgroup_hierarchy=1" is added. If specified the unified hierarchy is mounted to /sys/fs/cgroup instead of a tmpfs. No further hierarchies are mounted. The kernel command line option defaults to off. We can turn it on by default as soon as the kernel's APIs regarding this are stabilized (but even then downstream distros might want to turn this off, as this will break any tools that access cgroupfs directly). It is possibly to choose for each boot individually whether the unified or the legacy hierarchy is used. nspawn will by default provide the legacy hierarchy to containers if the host is using it, and the unified otherwise. However it is possible to run containers with the unified hierarchy on a legacy host and vice versa, by setting the $UNIFIED_CGROUP_HIERARCHY environment variable for nspawn to 1 or 0, respectively. The unified hierarchy provides reliable cgroup empty notifications for the first time, via inotify. To make use of this we maintain one manager-wide inotify fd, and each cgroup to it. This patch also removes cg_delete() which is unused now. On kernel 4.2 only the "memory" controller is compatible with the unified hierarchy, hence that's the only controller systemd exposes when booted in unified heirarchy mode. This introduces a new enum for enumerating supported controllers, plus a related enum for the mask bits mapping to it. The core is changed to make use of this everywhere. This moves PID 1 into a new "init.scope" implicit scope unit in the root slice. This is necessary since on the unified hierarchy cgroups may either contain subgroups or processes but not both. PID 1 hence has to move out of the root cgroup (strictly speaking the root cgroup is the only one where processes and subgroups are still allowed, but in order to support containers nicey, we move PID 1 into the new scope in all cases.) This new unit is also used on legacy hierarchy setups. It's actually pretty useful on all systems, as it can then be used to filter journal messages coming from PID 1, and so on. The root slice ("-.slice") is now implicitly created and started (and does not require a unit file on disk anymore), since that's where "init.scope" is located and the slice needs to be started before the scope can. To check whether we are in unified or legacy hierarchy mode we use statfs() on /sys/fs/cgroup. If the .f_type field reports tmpfs we are in legacy mode, if it reports cgroupfs we are in unified mode. This patch set carefuly makes sure that cgls and cgtop continue to work as desired. When invoking nspawn as a service it will implicitly create two subcgroups in the cgroup it is using, one to move the nspawn process into, the other to move the actual container processes into. This is done because of the requirement that cgroups may either contain processes or other subgroups.
2015-09-01cgtop: properly show "/" instead of empty string in cgroup listLennart Poettering
2015-08-31cgtop: rework error handlingLennart Poettering
Never report errors twice.
2015-08-31cgtop: allow toggling of --recursive= and -k at runtimeLennart Poettering
2015-08-31cgtop: recursively count cgroup member tasksLennart Poettering
When showing the number of tasks in a cgroup, recursively count tasks in child cgroups and include them in the number. This ensures that the number of tasks is cummulative the same way as memory, cpu and IO resources are. Old behaviour can be restored by passing the new --recursive=no switch.
2015-08-31cgtop: ignore kernel threads when counting tasksLennart Poettering
However, allow them to be counted in by specifying -k
2015-08-31cgtop: show resource usage relative to cgroup root onlyLennart Poettering
This way the output is restricted to cgroups from a container when run in one.
2015-08-28cgtop: major modernizationsLennart Poettering
In preparation of the unified cgroup support, let's clean up cgtop: a) rework time code to be based on "nsec_t" rather than "struct timespec" b) Introduce long option --order= for selecting ordering c) count number of processes only in the main hierarchy, don't bother with the controller hierarchies. We don't allow orthogonal hierarchies in systemd anymore, hence there's no point to check the other hierarchies. d) Deal with non-monotonic cpuacct values (see #749) e) When sorting groups, don't do prefix compare when ordering by number of tasks, since this is not accumulative for all children. f) Actually make --cpu without parameter work g) Don't output control characters when we get them as input. Fixes #749.
2015-07-17cgtop: include missing signal.h for sigwinchUmut Tezduyar Lindskog
2015-06-10cgtop: IO readings are valid if any data is available, even if unchanged ↵Charles Duffy
since last tick Emit "0" rather than "-" if no change in IO values are seen for a process since last tick, so long as accounting has registered content at all.
2015-06-09cgtop: more sensible flushing behavior w/ non-TTY outputCharles Duffy
- Explicitly flush stdout before sleep between iterations - Only clear user keystrokes when output is to TTY - Add a newline between output batches when output is not to TTY
2015-06-09cgtop: allow user to force looping behavior even in non-TTY modeCharles Duffy
2015-06-09cgtop: raw output option (disable conversion to human-readable units)Charles Duffy
2015-04-11shared: add terminal-util.[ch]Ronny Chevalier
2015-03-11cgtop: fix assert when not on ttyUmut Tezduyar Lindskog
systemd-cgtop --dept=1 -b -n 10 -d 0.1 | cat Assertion 'new_length >= 3' failed at src/shared/util.c:3 \ 595, function ellipsize_mem(). Aborting. Aborted (core dumped) (David: add comment)
2014-11-28treewide: no need to negate errno for log_*_errno()Michal Schmidt
It corrrectly handles both positive and negative errno values.
2014-11-28treewide: auto-convert the simple cases to log_*_errno()Michal Schmidt
As a followup to 086891e5c1 "log: add an "error" parameter to all low-level logging calls and intrdouce log_error_errno() as log calls that take error numbers", use sed to convert the simple cases to use the new macros: find . -name '*.[ch]' | xargs sed -r -i -e \ 's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/' Multi-line log_*() invocations are not covered. And we also should add log_unit_*_errno().
2014-10-23install, cgtop: adjust hashmap_move_one() callers for -ENOMEM possibilityMichal Schmidt
That hashmap_move_one() currently cannot fail with -ENOMEM is an implementation detail, which is not possible to guarantee in general. Hashmap implementations based on anything else than chaining of individual entries may have to allocate. hashmap_move_one will not fail with -ENOMEM if a proper reservation has been made beforehand. Use reservations in install.c. In cgtop.c simply propagate the error instead of asserting.
2014-09-15hashmap: introduce hash_ops to make struct Hashmap smallerMichal Schmidt
It is redundant to store 'hash' and 'compare' function pointers in struct Hashmap separately. The functions always comprise a pair. Store a single pointer to struct hash_ops instead. systemd keeps hundreds of hashmaps, so this saves a little bit of memory.
2014-08-03Unify parse_argv styleZbigniew Jędrzejewski-Szmek
getopt is usually good at printing out a nice error message when commandline options are invalid. It distinguishes between an unknown option and a known option with a missing arg. It is better to let it do its job and not use opterr=0 unless we actually want to suppress messages. So remove opterr=0 in the few places where it wasn't really useful. When an error in options is encountered, we should not print a lengthy help() and overwhelm the user, when we know precisely what is wrong with the commandline. In addition, since help() prints to stdout, it should not be used except when requested with -h or --help. Also, simplify things here and there.
2014-02-19make gcc shut upLennart Poettering
If -flto is used then gcc will generate a lot more warnings than before, among them a number of use-without-initialization warnings. Most of them without are false positives, but let's make them go away, because it doesn't really matter.
2013-12-25build-sys: minor fixes found with cppcheckLennart Poettering
2013-11-06clients: unify how we invoke getopt_long()Lennart Poettering
Among other things this makes sure we always expose a --version command and show it in the help texts.
2013-10-13Never call qsort on potentially NULL arraysZbigniew Jędrzejewski-Szmek
This extends 62678ded 'efi: never call qsort on potentially NULL arrays' to all other places where qsort is used and it is not obvious that the count is non-zero.
2013-09-04cgtop: fixup the online helpBrandon Philips
The online help shows the keys as uppercase but the code and manpage say lower case. Make the online help follow reality.
2013-06-06cgroup: the "tasks" attribute is obsolete, cgroup.procs is the new replacementLennart Poettering
2013-04-08cgtop: print absolute CPU times with format_timespanLennart Poettering
2013-04-04util: make time formatting a bit smarterLennart Poettering
Instead of outputting "5h 55s 50ms 3us" we'll now output "5h 55.050003s". Also, while outputting the accuracy is configurable. Basically we now try use "dot notation" for all time values > 1min. For >= 1s we use 's' as unit, otherwise for >= 1ms we use 'ms' as unit, and finally 'us'. This should give reasonably values in most cases.
2013-04-03util: rename parse_usec() to parse_sec() sinds the default unit is secondsLennart Poettering
Internally we store all time values in usec_t, however parse_usec() actually was used mostly to parse values in seconds (unless explicit units were specified to define a different unit). Hence, be clear about this and name the function about what we pass into it, not what we get out of it.
2013-04-02cgtop: add % as key to toggle time/percentageZbigniew Jędrzejewski-Szmek