| Age | Commit message (Collapse) | Author |
|---|
|
And set_free() too.
Another Coccinelle patch.
|
|
This replaces this:
free(p);
p = NULL;
by this:
p = mfree(p);
Change generated using coccinelle. Semantic patch is added to the
sources.
|
|
Let's add a way to get the type-specific D-Bus interface of a unit from
either its type or name to src/basic/unit-name.[ch]. That way we can
share it with the client side, where it is useful in tools like cgls or
machinectl.
Also ports over machinectl to make use of this.
|
|
This reverts commit d4d00020d6ad855d65d31020fefa5003e1bb477f. The idea of
the commit is broken and needs to be reworked. We really cannot reduce
the bus-addresses to a single address. We always will have systemd with
native clients and legacy clients at the same time, so we also need both
addresses at the same time.
|
|
We should not fall back to dbus-1 and connect to the proxy when kdbus
returns an error that indicates that kdbus is running but just does not
accept new connections because of quota limits or something similar.
Using is_kdbus_available() in libsystemd/ requires it to move from
shared/ to libsystemd/.
Based on a patch from David Herrmann:
https://github.com/systemd/systemd/pull/886
|
|
The expire timeout must be started/stopped if the corresponding mount unit
changes its state, e.g. it is started via local-fs.target or stopped by a
manual umount.
|
|
Return the token immediately instead. Otherwise the token is never returned
to the kernel, because the umount job is a noop and will not trigger a
state change.
|
|
The timer value for automount unit specified with TimeoutIdleSec= is rounded
up to one second if that directive is set to 0.
Fix this by bailing early in automount_enter_runnning() in case no timeout is
requested.
|
|
The autofs kernel idle logic requires us to poll the kernel for
idleness. This is of course suboptimal, but cannot be fixed without
kernel change.
Currently the polling frequency is set to 1/10 of the idle timeout. This
is quite high, as seen in #571. Let's lower this to 1/3.
|
|
These units' message format strings are identical to the generic
strings. Since we can always rely on the fallback, these are now
redundant.
|
|
This makes path_is_mount_point() consistent with fd_is_mount_point() wrt.
flags.
|
|
It's primarily just a property of the Manager object after all, and we
try to refer to PID 1 as "manager" instead of "systemd", hence let's to
stick to this here too.
|
|
This changes log_unit_info() (and friends) to take a real Unit* object
insted of just a unit name as parameter. The call will now prefix all
logged messages with the unit name, thus allowing the unit name to be
dropped from the various passed romat strings, simplifying invocations
drastically, and unifying log output across messages. Also, UNIT= vs.
USER_UNIT= is now derived from the Manager object attached to the Unit
object, instead of getpid(). This has the benefit of correcting the
field for --test runs.
Also contains a couple of other logging improvements:
- Drops a couple of strerror() invocations in favour of using %m.
- Not only .mount units now warn if a symlinks exist for the mount
point already, .automount units do that too, now.
- A few invocations of log_struct() that didn't actually pass any
additional structured data have been replaced by simpler invocations
of log_unit_info() and friends.
- For structured data a new LOG_UNIT_MESSAGE() macro has been added,
that works like LOG_MESSAGE() but prefixes the message with the unit
name. Similar, there's now LOG_LINK_MESSAGE() and
LOG_NETDEV_MESSAGE().
- For structured data new LOG_UNIT_ID(), LOG_LINK_INTERFACE(),
LOG_NETDEV_INTERFACE() macros have been added that generate the
necessary per object fields. The old log_unit_struct() call has been
removed in favour of these new macros used in raw log_struct()
invocations. In addition to removing one more function call this
allows generated structured log messages that contain two object
fields, as necessary for example for network interfaces that are
joined into another network interface, and whose messages shall be
indexed by both.
- The LOG_ERRNO() macro has been removed, in favour of
log_struct_errno(). The latter has the benefit of ensuring that %m in
format strings is properly resolved to the specified error number.
- A number of logging messages have been converted to use
log_unit_info() instead of log_info()
- The client code in sysv-generator no longer #includes core code from
src/core/.
- log_unit_full_errno() has been removed, log_unit_full() instead takes
an errno now, too.
- log_unit_info(), log_link_info(), log_netdev_info() and friends, now
avoid double evaluation of their parameters
|
|
A variety of changes:
- Make sure all our calls distuingish OOM from other errors if OOM is
not the only error possible.
- Be much stricter when parsing escaped paths, do not accept trailing or
leading escaped slashes.
- Change unit validation to take a bit mask for allowing plain names,
instance names or template names or an combination thereof.
- Refuse manipulating invalid unit name
|
|
Introduce a new call unit_type_supported() and make use of it
everywhere.
Also, drop Manager parameter from per-type supported method prototype.
|
|
|
|
This reverts commit 6e392c9c45643d106673c6643ac8bf4e65da13c1.
We really shouldn't invent external state keeping hashmaps, if we can
keep this state in the units themselves.
|
|
|
|
|
|
|
|
|
|
|
|
This should not happen... but when it does more information is nice.
|
|
|
|
Usually when using loop_read(), we want to read the full buffer.
Add a helper that mirrors loop_write(), and returns 0 when full buffer
was read, and an error otherwise.
Use -ENODATA for the short read, to distinguish it from a read error.
|
|
Because the order of coldplugging is not defined, we can reference a
not-yet-coldplugged unit and read its state while it has not yet been
set to a meaningful value.
This way, already active units may get started again.
We fix this by deferring such actions until all units have been at
least somehow coldplugged.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=88401
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
If we scale our buffer to be wide enough for the format string, we
should expect that the calculation was correct.
char_array_0() invocations are removed, since snprintf nul-terminates
the output in any case.
A similar wrapper is used for strftime calls, but only in timedatectl.c.
|
|
changing unit state
Unit _start() and _stop() implementations can fail with -EAGAIN to delay
execution temporarily. Thus, we should not output status messages before
invoking these calls, but after, and only when we know that the
invocation actually made a change.
|
|
Types used for pids and uids in various interfaces are unpredictable.
Too bad.
|
|
Containers do not really support .device, .automount or .swap units;
Systems compiled without support for swap do not support .swap units;
Systems without kdbus do not support .busname units.
With this change attempts to start a unsupported unit types will result
in an immediate "unsupported" job result, which is a lot more
descriptive then before. Also, attempts to start device units in
containers will now immediately fail instead of causing jobs to be
enqueued that never go away.
|
|
Using the same scripts as in f647962d64e "treewide: yet more log_*_errno
+ return simplifications".
|
|
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
|
|
|
|
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_unit_(debug|info|notice|warning|error|emergency)\(([^"]+), "(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_unit_\1_errno(\2, \5, "\3%m"\4);/'
|
|
- Rename log_meta() → log_internal(), to follow naming scheme of most
other log functions that are usually invoked through macros, but never
directly.
- Rename log_info_object() to log_object_info(), simply because the
object should be before any other parameters, to follow OO-style
programming style.
|
|
It is redundant to store 'hash' and 'compare' function pointers in
struct Hashmap separately. The functions always comprise a pair.
Store a single pointer to struct hash_ops instead.
systemd keeps hundreds of hashmaps, so this saves a little bit of
memory.
|
|
|
|
safe_close_pair() is more like safe_close(), except that it handles
pairs of fds, and doesn't make and misleading allusion, as it works
similarly well for socketpairs() as for pipe()s...
|
|
safe_close() automatically becomes a NOP when a negative fd is passed,
and returns -1 unconditionally. This makes it easy to write lines like
this:
fd = safe_close(fd);
Which will close an fd if it is open, and reset the fd variable
correctly.
By making use of this new scheme we can drop a > 200 lines of code that
was required to test for non-negative fds or to reset the closed fd
variable afterwards.
|
|
first (or second)
Previously the returned object of constructor functions where sometimes
returned as last, sometimes as first and sometimes as second parameter.
Let's clean this up a bit. Here are the new rules:
1. The object the new object is derived from is put first, if there is any
2. The object we are creating will be returned in the next arguments
3. This is followed by any additional arguments
Rationale:
For functions that operate on an object we always put that object first.
Constructors should probably not be too different in this regard. Also,
if the additional parameters might want to use varargs which suggests to
put them last.
Note that this new scheme only applies to constructor functions, not to
all other functions. We do give a lot of freedom for those.
Note that this commit only changes the order of the new functions we
added, for old ones we accept the wrong order and leave it like that.
|
|
It is nicer to predefine patterns using configure time check instead of
using casts everywhere.
Since we do not need to use any flags, include "%" in the format instead
of excluding it like PRI* macros.
|
|
Since the vtable includes this information anyway, let's just use that
|
|
|
|
Also for log_error() except where a specific error is specified
e.g. errno ? strerror(errno) : "Some user specified message"
|
|
This patch converts PID 1 to libsystemd-bus and thus drops the
dependency on libdbus. The only remaining code using libdbus is a test
case that validates our bus marshalling against libdbus' marshalling,
and this dependency can be turned off.
This patch also adds a couple of things to libsystem-bus, that are
necessary to make the port work:
- Synthesizing of "Disconnected" messages when bus connections are
severed.
- Support for attaching multiple vtables for the same interface on the
same path.
This patch also fixes the SetDefaultTarget() and GetDefaultTarget() bus
calls which used an inappropriate signature.
As a side effect we will now generate PropertiesChanged messages which
carry property contents, rather than just invalidation information.
|
|
Previously to automatically create dependencies between mount units we
matched every mount unit agains all others resulting in O(n^2)
complexity. On setups with large amounts of mount units this might make
things slow.
This change replaces the matching code to use a hashtable that is keyed
by a path prefix, and points to a set of units that require that path to
be around. When a new mount unit is installed it is hence sufficient to
simply look up this set of units via its own file system paths to know
which units to order after itself.
This patch also changes all unit types to only create automatic mount
dependencies via the RequiresMountsFor= logic, and this is exposed to
the outside to make things more transparent.
With this change we still have some O(n) complexities in place when
handling mounts, but that's currently unavoidable due to kernel APIs,
and still substantially better than O(n^2) as before.
https://bugs.freedesktop.org/show_bug.cgi?id=69740
|
|
Trivial cleanup of repeat_unmount() spelling.
|
|
When a trigger unit wants to know if a stop is queued for it, we should
just check precisely that and do not check whether it is actually
stopped already. This is because we use these checks usually from state
change calls where the state variables are not updated yet.
This change splits unit_pending_inactive() into two calls
unit_inactive_or_pending() and unit_stop_pending(). The former checks
state and pending jobs, the latter only pending jobs.
|
|
Instead of having explicit type-specific callbacks that inform the
triggering unit when a triggered unit changes state, make this generic
so that state changes are forwarded betwee any triggered and triggering
unit.
Also, get rid of UnitRef references from automount, timer, path units,
to the units they trigger and rely exclsuively on UNIT_TRIGGER type
dendencies.
|
