summaryrefslogtreecommitdiff
path: root/src/core/automount.c
AgeCommit message (Collapse)Author
2015-10-08core: add support for setting stdin/stdout/stderr for transient servicesLennart Poettering
When starting a transient service, allow setting stdin/stdout/stderr fds for it, by passing them in via the bus. This also simplifies some of the serialization code for units.
2015-09-28Move all unit states to basic/ and extend systemctl --state=helpZbigniew Jędrzejewski-Szmek
2015-09-09tree-wide: take benefit of the fact that hashmap_free() returns NULLLennart Poettering
And set_free() too. Another Coccinelle patch.
2015-09-09tree-wide: use coccinelle to patch a lot of code to use mfree()Lennart Poettering
This replaces this: free(p); p = NULL; by this: p = mfree(p); Change generated using coccinelle. Semantic patch is added to the sources.
2015-08-28core: add unit_dbus_interface_from_type() to unit-name.hLennart Poettering
Let's add a way to get the type-specific D-Bus interface of a unit from either its type or name to src/basic/unit-name.[ch]. That way we can share it with the client side, where it is useful in tools like cgls or machinectl. Also ports over machinectl to make use of this.
2015-08-27Revert "sd-bus: do not connect to dbus-1 socket when kdbus is available"David Herrmann
This reverts commit d4d00020d6ad855d65d31020fefa5003e1bb477f. The idea of the commit is broken and needs to be reworked. We really cannot reduce the bus-addresses to a single address. We always will have systemd with native clients and legacy clients at the same time, so we also need both addresses at the same time.
2015-08-11 sd-bus: do not connect to dbus-1 socket when kdbus is availableKay Sievers
We should not fall back to dbus-1 and connect to the proxy when kdbus returns an error that indicates that kdbus is running but just does not accept new connections because of quota limits or something similar. Using is_kdbus_available() in libsystemd/ requires it to move from shared/ to libsystemd/. Based on a patch from David Herrmann: https://github.com/systemd/systemd/pull/886
2015-07-24automount: handle state changes of the corresponding mount unit correctlyMichael Olbrich
The expire timeout must be started/stopped if the corresponding mount unit changes its state, e.g. it is started via local-fs.target or stopped by a manual umount.
2015-07-24automount: don't try to umount if it already happenedMichael Olbrich
Return the token immediately instead. Otherwise the token is never returned to the kernel, because the umount job is a noop and will not trigger a state change.
2015-07-24automount: do not start expiration timer for TimeoutIdleSec=0Daniel Mack
The timer value for automount unit specified with TimeoutIdleSec= is rounded up to one second if that directive is set to 0. Fix this by bailing early in automount_enter_runnning() in case no timeout is requested.
2015-07-24automount: lower the idle polling frequency a bitLennart Poettering
The autofs kernel idle logic requires us to poll the kernel for idleness. This is of course suboptimal, but cannot be fixed without kernel change. Currently the polling frequency is set to 1/10 of the idle timeout. This is quite high, as seen in #571. Let's lower this to 1/3.
2015-07-21core: remove generic job completion messages from unit vtablesMichal Schmidt
These units' message format strings are identical to the generic strings. Since we can always rely on the fallback, these are now redundant.
2015-05-29path-util: Change path_is_mount_point() symlink arg from bool to flagsMartin Pitt
This makes path_is_mount_point() consistent with fd_is_mount_point() wrt. flags.
2015-05-11core: rename SystemdRunningAs to ManagerRunningAsLennart Poettering
It's primarily just a property of the Manager object after all, and we try to refer to PID 1 as "manager" instead of "systemd", hence let's to stick to this here too.
2015-05-11core,network: major per-object logging reworkLennart Poettering
This changes log_unit_info() (and friends) to take a real Unit* object insted of just a unit name as parameter. The call will now prefix all logged messages with the unit name, thus allowing the unit name to be dropped from the various passed romat strings, simplifying invocations drastically, and unifying log output across messages. Also, UNIT= vs. USER_UNIT= is now derived from the Manager object attached to the Unit object, instead of getpid(). This has the benefit of correcting the field for --test runs. Also contains a couple of other logging improvements: - Drops a couple of strerror() invocations in favour of using %m. - Not only .mount units now warn if a symlinks exist for the mount point already, .automount units do that too, now. - A few invocations of log_struct() that didn't actually pass any additional structured data have been replaced by simpler invocations of log_unit_info() and friends. - For structured data a new LOG_UNIT_MESSAGE() macro has been added, that works like LOG_MESSAGE() but prefixes the message with the unit name. Similar, there's now LOG_LINK_MESSAGE() and LOG_NETDEV_MESSAGE(). - For structured data new LOG_UNIT_ID(), LOG_LINK_INTERFACE(), LOG_NETDEV_INTERFACE() macros have been added that generate the necessary per object fields. The old log_unit_struct() call has been removed in favour of these new macros used in raw log_struct() invocations. In addition to removing one more function call this allows generated structured log messages that contain two object fields, as necessary for example for network interfaces that are joined into another network interface, and whose messages shall be indexed by both. - The LOG_ERRNO() macro has been removed, in favour of log_struct_errno(). The latter has the benefit of ensuring that %m in format strings is properly resolved to the specified error number. - A number of logging messages have been converted to use log_unit_info() instead of log_info() - The client code in sysv-generator no longer #includes core code from src/core/. - log_unit_full_errno() has been removed, log_unit_full() instead takes an errno now, too. - log_unit_info(), log_link_info(), log_netdev_info() and friends, now avoid double evaluation of their parameters
2015-05-05core: rework unit name validation and manipulation logicLennart Poettering
A variety of changes: - Make sure all our calls distuingish OOM from other errors if OOM is not the only error possible. - Be much stricter when parsing escaped paths, do not accept trailing or leading escaped slashes. - Change unit validation to take a bit mask for allowing plain names, instance names or template names or an combination thereof. - Refuse manipulating invalid unit name
2015-04-30core: simplify unit type detection logicLennart Poettering
Introduce a new call unit_type_supported() and make use of it everywhere. Also, drop Manager parameter from per-type supported method prototype.
2015-04-29core: annotate event sourcesTom Gundersen
2015-04-24Revert "core: do not spawn jobs or touch other units during coldplugging"Lennart Poettering
This reverts commit 6e392c9c45643d106673c6643ac8bf4e65da13c1. We really shouldn't invent external state keeping hashmaps, if we can keep this state in the units themselves.
2015-04-21automount: remove unused variableThomas Hindoe Paaboel Andersen
2015-04-21automount: various smaller fixesLennart Poettering
2015-04-21automount: add expire supportMichael Olbrich
2015-04-10shared: add process-util.[ch]Ronny Chevalier
2015-04-10shared: add formats-util.hRonny Chevalier
2015-04-08core/automount: beef up error messageZbigniew Jędrzejewski-Szmek
This should not happen... but when it does more information is nice.
2015-04-07path-util: fix more path_is_mount e792e890f falloutLennart Poettering
2015-03-09Introduce loop_read_exact helperZbigniew Jędrzejewski-Szmek
Usually when using loop_read(), we want to read the full buffer. Add a helper that mirrors loop_write(), and returns 0 when full buffer was read, and an error otherwise. Use -ENODATA for the short read, to distinguish it from a read error.
2015-03-07core: do not spawn jobs or touch other units during coldpluggingIvan Shapovalov
Because the order of coldplugging is not defined, we can reference a not-yet-coldplugged unit and read its state while it has not yet been set to a meaningful value. This way, already active units may get started again. We fix this by deferring such actions until all units have been at least somehow coldplugged. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=88401
2015-02-23remove unused includesThomas Hindoe Paaboel Andersen
This patch removes includes that are not used. The removals were found with include-what-you-use which checks if any of the symbols from a header is in use.
2015-02-01Add a snprinf wrapper which checks that the buffer was big enoughZbigniew Jędrzejewski-Szmek
If we scale our buffer to be wide enough for the format string, we should expect that the calculation was correct. char_array_0() invocations are removed, since snprintf nul-terminates the output in any case. A similar wrapper is used for strftime calls, but only in timedatectl.c.
2015-01-28core: output unit status output strings to console, only if we actually are ↵Lennart Poettering
changing unit state Unit _start() and _stop() implementations can fail with -EAGAIN to delay execution temporarily. Thus, we should not output status messages before invoking these calls, but after, and only when we know that the invocation actually made a change.
2015-01-22Assorted format fixesZbigniew Jędrzejewski-Szmek
Types used for pids and uids in various interfaces are unpredictable. Too bad.
2014-12-15unit: handle nicely of certain unit types are not supported on specific systemsLennart Poettering
Containers do not really support .device, .automount or .swap units; Systems compiled without support for swap do not support .swap units; Systems without kdbus do not support .busname units. With this change attempts to start a unsupported unit types will result in an immediate "unsupported" job result, which is a lot more descriptive then before. Also, attempts to start device units in containers will now immediately fail instead of causing jobs to be enqueued that never go away.
2014-11-28treewide: another round of simplificationsMichal Schmidt
Using the same scripts as in f647962d64e "treewide: yet more log_*_errno + return simplifications".
2014-11-28treewide: use log_*_errno whenever %m is in the format stringMichal Schmidt
If the format string contains %m, clearly errno must have a meaningful value, so we might as well use log_*_errno to have ERRNO= logged. Using: find . -name '*.[ch]' | xargs sed -r -i -e \ 's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/' Plus some whitespace, linewrap, and indent adjustments.
2014-11-28core: two more log_unit_*_errno() conversionsMichal Schmidt
2014-11-28core: convert log_unit_*() to log_unit_*_errno()Michal Schmidt
Using: find . -name '*.[ch]' | xargs sed -r -i -e \ 's/log_unit_(debug|info|notice|warning|error|emergency)\(([^"]+), "(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_unit_\1_errno(\2, \5, "\3%m"\4);/'
2014-11-27log: rearrange log function namingLennart Poettering
- Rename log_meta() → log_internal(), to follow naming scheme of most other log functions that are usually invoked through macros, but never directly. - Rename log_info_object() to log_object_info(), simply because the object should be before any other parameters, to follow OO-style programming style.
2014-09-15hashmap: introduce hash_ops to make struct Hashmap smallerMichal Schmidt
It is redundant to store 'hash' and 'compare' function pointers in struct Hashmap separately. The functions always comprise a pair. Store a single pointer to struct hash_ops instead. systemd keeps hundreds of hashmaps, so this saves a little bit of memory.
2014-06-24use more _cleanup_ macroRonny Chevalier
2014-03-24util: replace close_pipe() with new safe_close_pair()Lennart Poettering
safe_close_pair() is more like safe_close(), except that it handles pairs of fds, and doesn't make and misleading allusion, as it works similarly well for socketpairs() as for pipe()s...
2014-03-18util: replace close_nointr_nofail() by a more useful safe_close()Lennart Poettering
safe_close() automatically becomes a NOP when a negative fd is passed, and returns -1 unconditionally. This makes it easy to write lines like this: fd = safe_close(fd); Which will close an fd if it is open, and reset the fd variable correctly. By making use of this new scheme we can drop a > 200 lines of code that was required to test for non-negative fds or to reset the closed fd variable afterwards.
2014-02-20api: in constructor function calls, always put the returned object pointer ↵Lennart Poettering
first (or second) Previously the returned object of constructor functions where sometimes returned as last, sometimes as first and sometimes as second parameter. Let's clean this up a bit. Here are the new rules: 1. The object the new object is derived from is put first, if there is any 2. The object we are creating will be returned in the next arguments 3. This is followed by any additional arguments Rationale: For functions that operate on an object we always put that object first. Constructors should probably not be too different in this regard. Also, if the additional parameters might want to use varargs which suggests to put them last. Note that this new scheme only applies to constructor functions, not to all other functions. We do give a lot of freedom for those. Note that this commit only changes the order of the new functions we added, for old ones we accept the wrong order and leave it like that.
2014-01-02Use format patterns for usec_t, pid_t, nsec_t, usec_tZbigniew Jędrzejewski-Szmek
It is nicer to predefine patterns using configure time check instead of using casts everywhere. Since we do not need to use any flags, include "%" in the format instead of excluding it like PRI* macros.
2013-12-22core: no need to list properties for PropertiesChanged messages anymoreLennart Poettering
Since the vtable includes this information anyway, let's just use that
2013-11-28automount: log info about triggering processKay Sievers
2013-11-26tree-wide usage of %m specifier instead of strerror(errno)Daniel Buch
Also for log_error() except where a specific error is specified e.g. errno ? strerror(errno) : "Some user specified message"
2013-11-20core: convert PID 1 to libsystemd-busLennart Poettering
This patch converts PID 1 to libsystemd-bus and thus drops the dependency on libdbus. The only remaining code using libdbus is a test case that validates our bus marshalling against libdbus' marshalling, and this dependency can be turned off. This patch also adds a couple of things to libsystem-bus, that are necessary to make the port work: - Synthesizing of "Disconnected" messages when bus connections are severed. - Support for attaching multiple vtables for the same interface on the same path. This patch also fixes the SetDefaultTarget() and GetDefaultTarget() bus calls which used an inappropriate signature. As a side effect we will now generate PropertiesChanged messages which carry property contents, rather than just invalidation information.
2013-09-26core: rework how we match mount units against each otherLennart Poettering
Previously to automatically create dependencies between mount units we matched every mount unit agains all others resulting in O(n^2) complexity. On setups with large amounts of mount units this might make things slow. This change replaces the matching code to use a hashtable that is keyed by a path prefix, and points to a set of units that require that path to be around. When a new mount unit is installed it is hence sufficient to simply look up this set of units via its own file system paths to know which units to order after itself. This patch also changes all unit types to only create automatic mount dependencies via the RequiresMountsFor= logic, and this is exposed to the outside to make things more transparent. With this change we still have some O(n) complexities in place when handling mounts, but that's currently unavoidable due to kernel APIs, and still substantially better than O(n^2) as before. https://bugs.freedesktop.org/show_bug.cgi?id=69740
2013-09-13automount: rename repeat_unmont to repeat_unmountDavid Mackey
Trivial cleanup of repeat_unmount() spelling.