Age | Commit message (Collapse) | Author |
|
Remove some old cruft
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
unit, not just services
This moves the StartLimitBurst=, StartLimitInterval=, StartLimitAction=, RebootArgument= from the [Service] section
into the [Unit] section of unit files, and thus support it in all unit types, not just in services.
This way we can enforce the start limit much earlier, in particular before testing the unit conditions, so that
repeated start-up failure due to failed conditions is also considered for the start limit logic.
For compatibility the four options may also be configured in the [Service] section still, but we only document them in
their new section [Unit].
This also renamed the socket unit failure code "service-failed-permanent" into "service-start-limit-hit" to express
more clearly what it is about, after all it's only triggered through the start limit being hit.
Finally, the code in busname_trigger_notify() and socket_trigger_notify() is altered to become more alike.
Fixes: #2467
|
|
events correctly
|
|
This clean-ups timeout handling in PID 1. Specifically, instead of storing 0 in internal timeout variables as
indication for a disabled timeout, use USEC_INFINITY which is in-line with how we do this in the rest of our code
(following the logic that 0 means "no", and USEC_INFINITY means "never").
This also replace all usec_t additions with invocations to usec_add(), so that USEC_INFINITY is properly propagated,
and sd-event considers it has indication for turning off the event source.
This also alters the deserialization of the units to restart timeouts from the time they were originally started from.
Before this patch timeouts would be restarted beginning with the time of the deserialization, which could lead to
artificially prolonged timeouts if a daemon reload took place.
Finally, a new RuntimeMaxSec= setting is introduced for service units, that specifies a maximum runtime after which a
specific service is forcibly terminated. This is useful to put time limits on time-intensive processing jobs.
This also simplifies the various xyz_spawn() calls of the various types in that explicit distruction of the timers is
removed, as that is done anyway by the state change handlers, and a state change is always done when the xyz_spawn()
calls fail.
Fixes: #2249
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
Now that we don't have RequiresOverridable= and RequisiteOverridable=
dependencies anymore, we can get rid of tracking the "override" boolean
for jobs in the job engine, as it serves no purpose anymore.
While we are at it, fix some error messages we print when invoking
functions that take the override parameter.
|
|
When coldplugging the unit state, make sure to follow the same basic
logic for all unit types: always verify whether the control PID is still
a waitable process before proceeding.
|
|
|
|
|
|
|
|
|
|
There are more than enough to deserve their own .c file, hence move them
over.
|
|
string-util.[ch]
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
|
|
Normally this shouldn't happen unless the daemon is reloaded.
A similar check is already in place in socket.c for the socket
activation case.
This hopefully makes #1526 non-fatal, though it will not fix this, and
there's something else to fix.
|
|
When starting a transient service, allow setting stdin/stdout/stderr fds
for it, by passing them in via the bus.
This also simplifies some of the serialization code for units.
|
|
|
|
This replaces this:
free(p);
p = NULL;
by this:
p = mfree(p);
Change generated using coccinelle. Semantic patch is added to the
sources.
|
|
Let's add a way to get the type-specific D-Bus interface of a unit from
either its type or name to src/basic/unit-name.[ch]. That way we can
share it with the client side, where it is useful in tools like cgls or
machinectl.
Also ports over machinectl to make use of this.
|
|
These units' message format strings are identical to the generic
strings. Since we can always rely on the fallback, these are now
redundant.
|
|
mask/handlers
Also, when the child is potentially long-running make sure to set a
death signal.
Also, ignore the result of the reset operations explicitly by casting
them to (void).
|
|
|
|
No functional changes.
|
|
|
|
It's primarily just a property of the Manager object after all, and we
try to refer to PID 1 as "manager" instead of "systemd", hence let's to
stick to this here too.
|
|
This changes log_unit_info() (and friends) to take a real Unit* object
insted of just a unit name as parameter. The call will now prefix all
logged messages with the unit name, thus allowing the unit name to be
dropped from the various passed romat strings, simplifying invocations
drastically, and unifying log output across messages. Also, UNIT= vs.
USER_UNIT= is now derived from the Manager object attached to the Unit
object, instead of getpid(). This has the benefit of correcting the
field for --test runs.
Also contains a couple of other logging improvements:
- Drops a couple of strerror() invocations in favour of using %m.
- Not only .mount units now warn if a symlinks exist for the mount
point already, .automount units do that too, now.
- A few invocations of log_struct() that didn't actually pass any
additional structured data have been replaced by simpler invocations
of log_unit_info() and friends.
- For structured data a new LOG_UNIT_MESSAGE() macro has been added,
that works like LOG_MESSAGE() but prefixes the message with the unit
name. Similar, there's now LOG_LINK_MESSAGE() and
LOG_NETDEV_MESSAGE().
- For structured data new LOG_UNIT_ID(), LOG_LINK_INTERFACE(),
LOG_NETDEV_INTERFACE() macros have been added that generate the
necessary per object fields. The old log_unit_struct() call has been
removed in favour of these new macros used in raw log_struct()
invocations. In addition to removing one more function call this
allows generated structured log messages that contain two object
fields, as necessary for example for network interfaces that are
joined into another network interface, and whose messages shall be
indexed by both.
- The LOG_ERRNO() macro has been removed, in favour of
log_struct_errno(). The latter has the benefit of ensuring that %m in
format strings is properly resolved to the specified error number.
- A number of logging messages have been converted to use
log_unit_info() instead of log_info()
- The client code in sysv-generator no longer #includes core code from
src/core/.
- log_unit_full_errno() has been removed, log_unit_full() instead takes
an errno now, too.
- log_unit_info(), log_link_info(), log_netdev_info() and friends, now
avoid double evaluation of their parameters
|
|
Whenever systemd is re-executed, it tries to create a system bus via
kdbus. If the system did not have kdbus loaded during bootup, but the
module is loaded later on manually, this will cause two system buses
running (kdbus and dbus-daemon in parallel).
This patch makes sure we never try to create kdbus buses if it wasn't
explicitly requested on the command-line.
|
|
|
|
A variety of changes:
- Make sure all our calls distuingish OOM from other errors if OOM is
not the only error possible.
- Be much stricter when parsing escaped paths, do not accept trailing or
leading escaped slashes.
- Change unit validation to take a bit mask for allowing plain names,
instance names or template names or an combination thereof.
- Refuse manipulating invalid unit name
|
|
Introduce a new call unit_type_supported() and make use of it
everywhere.
Also, drop Manager parameter from per-type supported method prototype.
|
|
These looked like a mass-replace gone slightly wrong – two statements
with no { }'s, and no error checking.
|
|
|
|
This reverts commit 6e392c9c45643d106673c6643ac8bf4e65da13c1.
We really shouldn't invent external state keeping hashmaps, if we can
keep this state in the units themselves.
|
|
|
|
|
|
Because the order of coldplugging is not defined, we can reference a
not-yet-coldplugged unit and read its state while it has not yet been
set to a meaningful value.
This way, already active units may get started again.
We fix this by deferring such actions until all units have been at
least somehow coldplugged.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=88401
|
|
Add the missing "static" to actually make this a cache.
|
|
After all it is now much more like strjoin() than strappend(). At the
same time, add support for NULL sentinels, even if they are normally not
necessary.
|
|
changing unit state
Unit _start() and _stop() implementations can fail with -EAGAIN to delay
execution temporarily. Thus, we should not output status messages before
invoking these calls, but after, and only when we know that the
invocation actually made a change.
|
|
Just a simple variable rename, and a dropped flag that sd-bus didn't make
use of.
|
|
files from core
Stuff in src/shared or src/libsystemd should *never* include code from
src/core or any of the tools, so don't do that here either. It's not OK!
|
|
The KDBUS_CMD_FREE ioctl struct has a size field now, which needs to be set.
|
|
Containers do not really support .device, .automount or .swap units;
Systems compiled without support for swap do not support .swap units;
Systems without kdbus do not support .busname units.
With this change attempts to start a unsupported unit types will result
in an immediate "unsupported" job result, which is a lot more
descriptive then before. Also, attempts to start device units in
containers will now immediately fail instead of causing jobs to be
enqueued that never go away.
|
|
Sync up with recent kdbus changed:
* several ioctls gained .size and .items members (but still unused)
* CMD_SEND gained its own ioctl structure
* several members of kdbus_msg were dropped as they were only used during
SEND, not during RECV etc.
* CMD_RECV and CMD_SEND now share a kdbus_reply member which contains the
offset and size of the returned message.
|
|
|
|
|
|
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_unit_(debug|info|notice|warning|error|emergency)\(([^"]+), "(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_unit_\1_errno(\2, \5, "\3%m"\4);/'
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
|
- Rename log_meta() → log_internal(), to follow naming scheme of most
other log functions that are usually invoked through macros, but never
directly.
- Rename log_info_object() to log_object_info(), simply because the
object should be before any other parameters, to follow OO-style
programming style.
|