| Age | Commit message (Collapse) | Author |
|---|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
|
|
|
|
There are more than enough to deserve their own .c file, hence move them
over.
|
|
|
|
Let's make sure that we follow the same codepaths when adjusting a
cgroup property via the dbus SetProperty() call, and when we execute the
StartupCPUShares= effect.
|
|
Let's stop using the "unsigned long" type for weights/shares, and let's
just use uint64_t for this, as that's what we expose on the bus.
Unify parsers, and always validate the range for these fields.
Correct the default blockio weight to 500, since that's what the kernel
actually uses.
When parsing the weight/shares settings from unit files accept the empty
string as a way to reset the weight/shares value. When getting it via
the bus, uniformly map (uint64_t) -1 to unset.
Open up StartupCPUShares= and StartupBlockIOWeight= to transient units.
|
|
This adds support for the new "pids" cgroup controller of 4.3 kernels.
It allows accounting the number of tasks in a cgroup and enforcing
limits on it.
This adds two new setting TasksAccounting= and TasksMax= to each unit,
as well as a gloabl option DefaultTasksAccounting=.
This also updated "cgtop" to optionally make use of the new
kernel-provided accounting.
systemctl has been updated to show the number of tasks for each service
if it is available.
This patch also adds correct support for undoing memory limits for units
using a MemoryLimit=infinity syntax. We do the same for TasksMax= now
and hence keep things in sync here.
|
|
the controller in the kernel
Follow-up to 5bf8002a3a6723ce50331c024122078552fb600a.
|
|
This patch set adds full support the new unified cgroup hierarchy logic
of modern kernels.
A new kernel command line option "systemd.unified_cgroup_hierarchy=1" is
added. If specified the unified hierarchy is mounted to /sys/fs/cgroup
instead of a tmpfs. No further hierarchies are mounted. The kernel
command line option defaults to off. We can turn it on by default as
soon as the kernel's APIs regarding this are stabilized (but even then
downstream distros might want to turn this off, as this will break any
tools that access cgroupfs directly).
It is possibly to choose for each boot individually whether the unified
or the legacy hierarchy is used. nspawn will by default provide the
legacy hierarchy to containers if the host is using it, and the unified
otherwise. However it is possible to run containers with the unified
hierarchy on a legacy host and vice versa, by setting the
$UNIFIED_CGROUP_HIERARCHY environment variable for nspawn to 1 or 0,
respectively.
The unified hierarchy provides reliable cgroup empty notifications for
the first time, via inotify. To make use of this we maintain one
manager-wide inotify fd, and each cgroup to it.
This patch also removes cg_delete() which is unused now.
On kernel 4.2 only the "memory" controller is compatible with the
unified hierarchy, hence that's the only controller systemd exposes when
booted in unified heirarchy mode.
This introduces a new enum for enumerating supported controllers, plus a
related enum for the mask bits mapping to it. The core is changed to
make use of this everywhere.
This moves PID 1 into a new "init.scope" implicit scope unit in the root
slice. This is necessary since on the unified hierarchy cgroups may
either contain subgroups or processes but not both. PID 1 hence has to
move out of the root cgroup (strictly speaking the root cgroup is the
only one where processes and subgroups are still allowed, but in order
to support containers nicey, we move PID 1 into the new scope in all
cases.) This new unit is also used on legacy hierarchy setups. It's
actually pretty useful on all systems, as it can then be used to filter
journal messages coming from PID 1, and so on.
The root slice ("-.slice") is now implicitly created and started (and
does not require a unit file on disk anymore), since
that's where "init.scope" is located and the slice needs to be started
before the scope can.
To check whether we are in unified or legacy hierarchy mode we use
statfs() on /sys/fs/cgroup. If the .f_type field reports tmpfs we are in
legacy mode, if it reports cgroupfs we are in unified mode.
This patch set carefuly makes sure that cgls and cgtop continue to work
as desired.
When invoking nspawn as a service it will implicitly create two
subcgroups in the cgroup it is using, one to move the nspawn process
into, the other to move the actual container processes into. This is
done because of the requirement that cgroups may either contain
processes or other subgroups.
|
|
|
|
After all it is now much more like strjoin() than strappend(). At the
same time, add support for NULL sentinels, even if they are normally not
necessary.
|
|
subhierarchies
For priviliged units this resource control property ensures that the
processes have all controllers systemd manages enabled.
For unpriviliged services (those with User= set) this ensures that
access rights to the service cgroup is granted to the user in question,
to create further subgroups. Note that this only applies to the
name=systemd hierarchy though, as access to other controllers is not
safe for unpriviliged processes.
Delegate=yes should be set for container scopes where a systemd instance
inside the container shall manage the hierarchies below its own cgroup
and have access to all controllers.
Delegate=yes should also be set for user@.service, so that systemd
--user can run, controlling its own cgroup tree.
This commit changes machined, systemd-nspawn@.service and user@.service
to set this boolean, in order to ensure that container management will
just work, and the user systemd instance can run fine.
|
|
No functional change intended.
|
|
Only accept cpu quota values in percentages, get rid of period
definition.
It's not clear whether the CFS period controllable per-cgroup even has a
future in the kernel, hence let's simplify all this, hardcode the period
to 100ms and only accept percentage based quota values.
|
|
Introduce a (unsigned long) -1 as "unset" state for cpu shares/block io
weights, and keep the startup unit set around all the time.
|
|
Similar to CPUShares= and BlockIOWeight= respectively. However only
assign the specified weight during startup. Each control group
attribute is re-assigned as weight by CPUShares=weight and
BlockIOWeight=weight after startup. If not CPUShares= or
BlockIOWeight= be specified, then the attribute is re-assigned to each
default attribute value. (default cpu.shares=1024, blkio.weight=1000)
If only CPUShares=weight or BlockIOWeight=weight be specified, then
that implies StartupCPUShares=weight and StartupBlockIOWeight=weight.
|
|
|
|
|
|
of the message
|
|
particular devices nodes
|
|
It is nicer to predefine patterns using configure time check instead of
using casts everywhere.
Since we do not need to use any flags, include "%" in the format instead
of excluding it like PRI* macros.
|
|
|
|
|
|
where appropriate
|
|
Message handler callbacks can be simplified drastically if the
dispatcher automatically replies to method calls if errors are returned.
Thus: add an sd_bus_error argument to all message handlers. When we
dispatch a message handler and it returns negative or a set sd_bus_error
we send this as message error back to the client. This means errors
returned by handlers by default are given back to clients instead of
rippling all the way up to the event loop, which is desirable to make
things robust.
As a side-effect we can now easily turn the SELinux checks into normal
function calls, since the method call dispatcher will generate the right
error replies automatically now.
Also, make sure we always pass the error structure to all property and
method handlers as last argument to follow the usual style of passing
variables for return values as last argument.
|
|
This patch converts PID 1 to libsystemd-bus and thus drops the
dependency on libdbus. The only remaining code using libdbus is a test
case that validates our bus marshalling against libdbus' marshalling,
and this dependency can be turned off.
This patch also adds a couple of things to libsystem-bus, that are
necessary to make the port work:
- Synthesizing of "Disconnected" messages when bus connections are
severed.
- Support for attaching multiple vtables for the same interface on the
same path.
This patch also fixes the SetDefaultTarget() and GetDefaultTarget() bus
calls which used an inappropriate signature.
As a side effect we will now generate PropertiesChanged messages which
carry property contents, rather than just invalidation information.
|
|
|
|
each invocation
We can determine the list entry type via the typeof() gcc construct, and
so we should to make the macros much shorter to use.
|
|
The cgroup attribute memory.soft_limit_in_bytes is unlikely to stay
around in the kernel for good, so let's not expose it for now. We can
readd something like it later when the kernel guys decided on a final
API for this.
|
|
This patch adds the support for setting up BlockIODeviceWeight
in bus_cgroup_set_property. most of the codes are copied from
the case that sets up DeviceAllow.
|
|
|
|
This patch adds the support for setting up BlockIORead/WriteBandwidth
in bus_cgroup_set_property.
|
|
If a device node is already in the device_allow list of
CGroupContext, we should replace it instead of create a
new one and append this new one to the end of device_allow
list.
change from v1: use streq to replace !strcmp
|
|
We should set up blockio_weight not cpu_shares.
|
|
let's make use of some format string magic!
|
|
Mapping from "FooBar" to "foo-bar" is unnecessary and makes it hard to
handle many different properties with the same code, hence, let's just
not do it.
|
|
Transient units can be created via the bus API. They are configured via
the method call parameters rather than on-disk files. They are subject
to normal GC. Transient units currently may only be created for
services (however, we will extend this), and currently only ExecStart=
and the cgroup parameters can be configured (also to be extended).
Transient units require a unique name, that previously had no
configuration file on disk.
A tool systemd-run is added that makes use of this functionality to run
arbitrary command lines as transient services:
$ systemd-run /bin/ping www.heise.de
Will cause systemd to create a new transient service and run ping in it.
|
|
|
|
|
|
and hook some cgroup attributes up to it
This introduces two bus calls to make runtime changes to selected bus
properties, optionally with persistence.
This currently hooks this up only for three cgroup atributes, but this
brings the infrastructure to add more changable attributes.
This allows setting multiple attributes at once, and takes an array
rather than a dictionary of properties, in order to implement simple
resetting of lists using the same approach as when they are sourced from
unit files. This means, that list properties are appended to by this
call, unless they are first reset via assigning the empty list.
|
|
Replace the very generic cgroup hookup with a much simpler one. With
this change only the high-level cgroup settings remain, the ability to
set arbitrary cgroup attributes is removed, so is support for adding
units to arbitrary cgroup controllers or setting arbitrary paths for
them (especially paths that are different for the various controllers).
This also introduces a new -.slice root slice, that is the parent of
system.slice and friends. This enables easy admin configuration of
root-level cgrouo properties.
This replaces DeviceDeny= by DevicePolicy=, and implicitly adds in
/dev/null, /dev/zero and friends if DeviceAllow= is used (unless this is
turned off by DevicePolicy=).
|
