summaryrefslogtreecommitdiff
path: root/src/core/dbus-service.c
AgeCommit message (Collapse)Author
2015-02-23remove unused includesThomas Hindoe Paaboel Andersen
This patch removes includes that are not used. The removals were found with include-what-you-use which checks if any of the symbols from a header is in use.
2015-01-06core: add new logic for services to store file descriptors in PID 1Lennart Poettering
With this change it is possible to send file descriptors to PID 1, via sd_pid_notify_with_fds() which PID 1 will store individually for each service, and pass via the usual fd passing logic on next invocation. This is useful for enable daemon reload schemes where daemons serialize their state to /run, push their fds into PID 1 and terminate, restoring their state on next start from the data in /run and passed in from PID 1. The fds are kept by PID 1 as long as no POLLHUP or POLLERR is seen on them, and the service they belong to are either not dead or failed, or have a job queued.
2014-12-18core: make exec_command_free_list return NULLZbigniew Jędrzejewski-Szmek
2014-07-07core: Added support for ERRNO NOTIFY_SOCKET message parsing, and added ↵Miguel Angel Ajo
StatusErrno dbus property along StatusText to allow notification of numeric status condition while degraded service operation or any other special situation.
2014-04-24service: rename StartLimitAction enum to FailureActionMichael Olbrich
It's used for the FailureAction property as well.
2014-04-24service: add FailureAction= optionMichael Olbrich
It has the same possible values as StartLimitAction= and is executed immediately if a service fails.
2014-04-21service: add support for reboot argument when triggered by StartLimitAction=Michael Olbrich
When rebooting with systemctl, an optional argument can be passed to the reboot system call. This makes it possible the specify the argument in a service file and use it when the service triggers a restart. This is useful to distinguish between manual reboots and reboots caused by failing services.
2014-02-17core: rework cgroup mask propagationLennart Poettering
Previously a cgroup setting down tree would result in cgroup membership additions being propagated up the tree and to the siblings, however a unit could never lose cgroup memberships again. With this change we'll make sure that both cgroup additions and removals propagate properly.
2014-02-05core: allow User=, Group=, Nice=, Environment=, Type= to be passed when ↵Lennart Poettering
creating a transient service
2013-12-22core: no need to list properties for PropertiesChanged messages anymoreLennart Poettering
Since the vtable includes this information anyway, let's just use that
2013-12-22bus: decorate the various object vtables with SD_BUS_VTABLE_PROPERTY_CONST ↵Lennart Poettering
where appropriate
2013-11-25core: fix serialization of exec command structsLennart Poettering
2013-11-21core: fix deserialization of StartTransientUnit() parametersLennart Poettering
2013-11-20core: convert PID 1 to libsystemd-busLennart Poettering
This patch converts PID 1 to libsystemd-bus and thus drops the dependency on libdbus. The only remaining code using libdbus is a test case that validates our bus marshalling against libdbus' marshalling, and this dependency can be turned off. This patch also adds a couple of things to libsystem-bus, that are necessary to make the port work: - Synthesizing of "Disconnected" messages when bus connections are severed. - Support for attaching multiple vtables for the same interface on the same path. This patch also fixes the SetDefaultTarget() and GetDefaultTarget() bus calls which used an inappropriate signature. As a side effect we will now generate PropertiesChanged messages which carry property contents, rather than just invalidation information.
2013-10-21bus: remove static introspection file exportKay Sievers
2013-09-09systemd-run: properly escape argumentsZbigniew Jędrzejewski-Szmek
Spaces, quotes, and such, were not properly escaped. We should write them like we read them. https://bugs.freedesktop.org/show_bug.cgi?id=67971
2013-07-30core: open up SendSIGHUP property for transient unitsLennart Poettering
2013-07-26core: allow setting RemainAfterExit= for transient servicesLennart Poettering
2013-07-11core: simplify drop-in writing logic a bitLennart Poettering
let's make use of some format string magic!
2013-07-11core: when writing drop-in files, name them directly after the property we setLennart Poettering
Mapping from "FooBar" to "foo-bar" is unnecessary and makes it hard to handle many different properties with the same code, hence, let's just not do it.
2013-07-01core: move ControlGroup and Slice properties out of the dbus "Unit" interfaceLennart Poettering
Slice/ControlGroup only really makes sense for unit types which actually have cgroups attached to them, hence move them out of the generic Unit interface and into the specific unit type interfaces. These fields will continue to be part of Unit though, simply because things are a log easier that way. However, regardless how this looks internally we should keep things clean and independent of the specific implementation of the inside.
2013-07-01core: allow setting of the description string for transient unitsLennart Poettering
2013-07-01dbus: expose cgroup properties in introspection everywhereLennart Poettering
2013-07-01service: correct service bus introspection for timeoutsLennart Poettering
2013-06-28core: add transient unitsLennart Poettering
Transient units can be created via the bus API. They are configured via the method call parameters rather than on-disk files. They are subject to normal GC. Transient units currently may only be created for services (however, we will extend this), and currently only ExecStart= and the cgroup parameters can be configured (also to be extended). Transient units require a unique name, that previously had no configuration file on disk. A tool systemd-run is added that makes use of this functionality to run arbitrary command lines as transient services: $ systemd-run /bin/ping www.heise.de Will cause systemd to create a new transient service and run ping in it.
2013-06-27dbus: hookup runtime property changes for mouns, services, sockets, swaps tooLennart Poettering
2013-06-27core: general cgroup reworkLennart Poettering
Replace the very generic cgroup hookup with a much simpler one. With this change only the high-level cgroup settings remain, the ability to set arbitrary cgroup attributes is removed, so is support for adding units to arbitrary cgroup controllers or setting arbitrary paths for them (especially paths that are different for the various controllers). This also introduces a new -.slice root slice, that is the parent of system.slice and friends. This enables easy admin configuration of root-level cgrouo properties. This replaces DeviceDeny= by DevicePolicy=, and implicitly adds in /dev/null, /dev/zero and friends if DeviceAllow= is used (unless this is turned off by DevicePolicy=).
2013-05-20core: fix DBus property ExecMainExitTimestampMichal Schmidt
Possibly due to copy&paste error it was identical to ExecMainStartTimestamp.
2013-01-14core: add bus API and systemctl commands for altering cgroup parameters ↵Lennart Poettering
during runtime
2012-10-02selinux: rework selinux access check logicLennart Poettering
a) Instead of parsing the bus messages inside of selinux-access.c simply pass everything pre-parsed in the functions b) implement the access checking with a macro that resolves to nothing on non-selinux builds c) split out the selinux checks into their own sources selinux-util.[ch] d) this unifies the job creation code behind the D-Bus calls Manager.StartUnit() and Unit.Start().
2012-08-08systemd: introduced new timeout typesMichal Sekletar
Makes possible to specify separate timeout for start and stop of the service. [ Improved the manpage. Coding style fix. -- michich ]
2012-07-20unit: split off KillContext from ExecContext containing only kill definitionsLennart Poettering
2012-05-30service: mark compat options as suchLennart Poettering
This moves FsckPassNo= and SysVStartPriority= into its own "Compatibility Options" section in the man page to clarify that these options are not useful for anything but establishing a limited amount of compatibility. Also stop exposing these options on the bus.
2012-05-22units: remove service sysv_path variable and replace it by generic unit_pathLennart Poettering
UnitPath= is also writable via native units and may be used by generators to clarify from which file a unit is generated. This patch also hooks up the cryptsetup and fstab generators to set UnitPath= accordingly.
2012-04-12relicense to LGPLv2.1 (with exceptions)Lennart Poettering
We finally got the OK from all contributors with non-trivial commits to relicense systemd from GPL2+ to LGPL2.1+. Some udev bits continue to be GPL2+ for now, but we are looking into relicensing them too, to allow free copy/paste of all code within systemd. The bits that used to be MIT continue to be MIT. The big benefit of the relicensing is that closed source code may now link against libsystemd-login.so and friends.
2012-04-11move libsystemd_core.la sources into core/Kay Sievers