summaryrefslogtreecommitdiff
path: root/src/core/dbus-unit.h
AgeCommit message (Collapse)Author
2015-04-29sd-bus: drop bus parameter from message callback prototypeLennart Poettering
This should simplify the prototype a bit. The bus parameter is redundant in most cases, and in the few where it matters it can be derived from the message via sd_bus_message_get_bus().
2013-11-21bus: rework message handlers to always take an error argumentLennart Poettering
Message handler callbacks can be simplified drastically if the dispatcher automatically replies to method calls if errors are returned. Thus: add an sd_bus_error argument to all message handlers. When we dispatch a message handler and it returns negative or a set sd_bus_error we send this as message error back to the client. This means errors returned by handlers by default are given back to clients instead of rippling all the way up to the event loop, which is desirable to make things robust. As a side-effect we can now easily turn the SELinux checks into normal function calls, since the method call dispatcher will generate the right error replies automatically now. Also, make sure we always pass the error structure to all property and method handlers as last argument to follow the usual style of passing variables for return values as last argument.
2013-11-20core: convert PID 1 to libsystemd-busLennart Poettering
This patch converts PID 1 to libsystemd-bus and thus drops the dependency on libdbus. The only remaining code using libdbus is a test case that validates our bus marshalling against libdbus' marshalling, and this dependency can be turned off. This patch also adds a couple of things to libsystem-bus, that are necessary to make the port work: - Synthesizing of "Disconnected" messages when bus connections are severed. - Support for attaching multiple vtables for the same interface on the same path. This patch also fixes the SetDefaultTarget() and GetDefaultTarget() bus calls which used an inappropriate signature. As a side effect we will now generate PropertiesChanged messages which carry property contents, rather than just invalidation information.
2013-07-17systemd,systemctl: export condition status and show failing conditionZbigniew Jędrzejewski-Szmek
$ systemctl --user status hoohoo hoohoo.service Loaded: loaded (/home/zbyszek/.config/systemd/user/hoohoo.service; static) Active: inactive (dead) start condition failed at Tue 2013-06-25 18:08:42 EDT; 1s ago ConditionPathExists=/tmp/hoo was not met Full information is exported over D-Bus: [(condition, trigger, negate, param, state),...] where state is one of "failed" (<0), "untested" (0), "OK" (>0). I've decided to use 0 for "untested", because it might be useful to differentiate different types of failure later on, without breaking compatibility. systemctl shows the failing condition, if there was a non-trigger failing condition, or says "none of the trigger conditions were met", because there're often many trigger conditions, and they must all fail for the condition to fail, so printing them all would consume a lot of space, and bring unnecessary attention to something that is quite low-level.
2013-07-01core: move ControlGroup and Slice properties out of the dbus "Unit" interfaceLennart Poettering
Slice/ControlGroup only really makes sense for unit types which actually have cgroups attached to them, hence move them out of the generic Unit interface and into the specific unit type interfaces. These fields will continue to be part of Unit though, simply because things are a log easier that way. However, regardless how this looks internally we should keep things clean and independent of the specific implementation of the inside.
2013-06-28core: add transient unitsLennart Poettering
Transient units can be created via the bus API. They are configured via the method call parameters rather than on-disk files. They are subject to normal GC. Transient units currently may only be created for services (however, we will extend this), and currently only ExecStart= and the cgroup parameters can be configured (also to be extended). Transient units require a unique name, that previously had no configuration file on disk. A tool systemd-run is added that makes use of this functionality to run arbitrary command lines as transient services: $ systemd-run /bin/ping www.heise.de Will cause systemd to create a new transient service and run ping in it.
2013-06-28unit: make sure the dropins we write are high-priorityLennart Poettering
2013-06-27dbus: add infrastructure for changing multiple properties at once on units ↵Lennart Poettering
and hook some cgroup attributes up to it This introduces two bus calls to make runtime changes to selected bus properties, optionally with persistence. This currently hooks this up only for three cgroup atributes, but this brings the infrastructure to add more changable attributes. This allows setting multiple attributes at once, and takes an array rather than a dictionary of properties, in order to implement simple resetting of lists using the same approach as when they are sourced from unit files. This means, that list properties are appended to by this call, unless they are first reset via assigning the empty list.
2013-06-27core: general cgroup reworkLennart Poettering
Replace the very generic cgroup hookup with a much simpler one. With this change only the high-level cgroup settings remain, the ability to set arbitrary cgroup attributes is removed, so is support for adding units to arbitrary cgroup controllers or setting arbitrary paths for them (especially paths that are different for the various controllers). This also introduces a new -.slice root slice, that is the parent of system.slice and friends. This enables easy admin configuration of root-level cgrouo properties. This replaces DeviceDeny= by DevicePolicy=, and implicitly adds in /dev/null, /dev/zero and friends if DeviceAllow= is used (unless this is turned off by DevicePolicy=).
2013-06-18core: expose a "Slice" property on Unit objects on the busLennart Poettering
2013-04-02Replace s/Dropin/DropIn/Zbigniew Jędrzejewski-Szmek
2013-04-01Introspect and monitor dropin configurationOleksii Shevchuk
2013-02-27unit: rework resource management APILennart Poettering
This introduces a new static list of known attributes and their special semantics. This means that cgroup attribute values can now be automatically translated from user to kernel notation for command line set settings, too. This also adds proper support for multi-line attributes.
2013-01-18systemctl: add new "get-cgroup-attr" to query current cgroup attribute valueLennart Poettering
Also adds a pair of bus calls for this to the daemon.
2013-01-17dbus: add Unit's PartOf and ConsistsOf deps to introspection XMLLennart Poettering
2013-01-14core: add bus API and systemctl commands for altering cgroup parameters ↵Lennart Poettering
during runtime
2012-10-02selinux: rework selinux access check logicLennart Poettering
a) Instead of parsing the bus messages inside of selinux-access.c simply pass everything pre-parsed in the functions b) implement the access checking with a macro that resolves to nothing on non-selinux builds c) split out the selinux checks into their own sources selinux-util.[ch] d) this unifies the job creation code behind the D-Bus calls Manager.StartUnit() and Unit.Start().
2012-07-20core: drop KillMode parameter from KillUnit() bus callLennart Poettering
It made no sense, and since we are documenting the bus calls now and want to include them in our stability promise we really should get it cleaned up sooner, not later.
2012-07-19use #pragma once instead of foo*foo #define guardsShawn Landden
#pragma once has been "un-deprecated" in gcc since 3.3, and is widely supported in other compilers. I've been using and maintaining (rebasing) this patch for a while now, as it annoyed me to see #ifndef fooblahfoo, etc all over the place, almost arrogant about the annoyance of having to define all these names to perform a commen but neccicary functionality, when a completely superior alternative exists. I havn't sent it till now, cause its kindof a style change, and it is bad voodoo to mess with style that has been established by more established editors. So feel free to lambast me as a crazy bafoon. v2 - preserve externally used headers
2012-07-13unit: rename BindTo= to BindsTo=Lennart Poettering
all other dependencies are in 3rd person. Change BindTo= accordingly to BindsTo=. Of course, the dependency is widely used, hence we parse the old name too for compatibility.
2012-05-22units: remove service sysv_path variable and replace it by generic unit_pathLennart Poettering
UnitPath= is also writable via native units and may be used by generators to clarify from which file a unit is generated. This patch also hooks up the cryptsetup and fstab generators to set UnitPath= accordingly.
2012-05-21units: introduce new Documentation= field and make use of it everywhereLennart Poettering
This should help making the boot process a bit easier to explore and understand for the administrator. The simple idea is that "systemctl status" now shows a link to documentation alongside the other status and decriptionary information of a service. This patch adds the necessary fields to all our shipped units if we have proper documentation for them.
2012-04-30unit: add new dependency type RequiresMountsFor=Lennart Poettering
RequiresMountsFor= is a shortcut for adding requires and after dependencies to all mount units neeed for the specified paths. This solves a couple of issues regarding dep loop cycles for encrypted swap.
2012-04-12relicense to LGPLv2.1 (with exceptions)Lennart Poettering
We finally got the OK from all contributors with non-trivial commits to relicense systemd from GPL2+ to LGPL2.1+. Some udev bits continue to be GPL2+ for now, but we are looking into relicensing them too, to allow free copy/paste of all code within systemd. The bits that used to be MIT continue to be MIT. The big benefit of the relicensing is that closed source code may now link against libsystemd-login.so and friends.
2012-04-11move libsystemd_core.la sources into core/Kay Sievers