| Age | Commit message (Collapse) | Author |
|---|
|
attached to a bus connection
This makes callback behaviour more like sd-event or sd-resolve, and
creates proper object for unregistering callbacks.
Taking the refernce to the slot is optional. If not taken life time of
the slot will be bound to the underlying bus object (or in the case of
an async call until the reply has been recieved).
|
|
|
|
|
|
safe_close() automatically becomes a NOP when a negative fd is passed,
and returns -1 unconditionally. This makes it easy to write lines like
this:
fd = safe_close(fd);
Which will close an fd if it is open, and reset the fd variable
correctly.
By making use of this new scheme we can drop a > 200 lines of code that
was required to test for non-negative fds or to reset the closed fd
variable afterwards.
|
|
GCC optimizes strlen("string constant") to a constant, even with -O0.
Thus, replace patterns like sizeof("string constant")-1 with
strlen("string constant") where possible, for clarity. In particular,
for expressions intended to add up the lengths of components going into
a string, this often makes it clearer that the expression counts the
trailing '\0' exactly once, by putting the +1 for the '\0' at the end of
the expression, rather than hidden in a sizeof in the middle of the
expression.
|
|
object
|
|
This is primarily useful for services that need to track clients which
reference certain objects they maintain, or which explicitly want to
subscribe to certain events. Something like this is done in a large
number of services, and not trivial to do. Hence, let's unify this at
one place.
This also ports over PID 1 to use this to ensure that subscriptions to
job and manager events are correctly tracked. As a side-effect this
makes sure we properly serialize and restore the track list across
daemon reexec/reload, which didn't work correctly before.
This also simplifies how we distribute messages to broadcast to the
direct busses: we only track subscriptions for the API bus and
implicitly assume that all direct busses are subscribed. This should be
a pretty OK simplification since clients connected via direct bus
connections are shortlived anyway.
|
|
first (or second)
Previously the returned object of constructor functions where sometimes
returned as last, sometimes as first and sometimes as second parameter.
Let's clean this up a bit. Here are the new rules:
1. The object the new object is derived from is put first, if there is any
2. The object we are creating will be returned in the next arguments
3. This is followed by any additional arguments
Rationale:
For functions that operate on an object we always put that object first.
Constructors should probably not be too different in this regard. Also,
if the additional parameters might want to use varargs which suggests to
put them last.
Note that this new scheme only applies to constructor functions, not to
all other functions. We do give a lot of freedom for those.
Note that this commit only changes the order of the new functions we
added, for old ones we accept the wrong order and leave it like that.
|
|
|
|
|
|
|
|
that are closer to kdbus
This turns around DO_NOT_QUEUE into QUEUE which implies a more useful
default. (And negative options are awful anyway.)
|
|
|
|
|
|
|
|
other calls
Instead of returning an enum of return codes, make them return error
codes like kdbus does internally.
Also, document this behaviour so that clients can stick to it.
(Also rework bus-control.c to always have to functions for dbus1 vs.
kernel implementation of the various calls.)
|
|
This way we can unify handling of credentials that are attached to
messages, or can be queried for bus name owners or connection peers.
This also adds the ability to extend incomplete credential information
with data from /proc,
Also, provide a convenience call that will automatically determine the
most appropriate credential object for an incoming message, by using the
the attached information if possible, the sending name information if
available and otherwise the peer's credentials.
|
|
Just in order to bring things inline with the method and property
callbacks.
|
|
|
|
Message handler callbacks can be simplified drastically if the
dispatcher automatically replies to method calls if errors are returned.
Thus: add an sd_bus_error argument to all message handlers. When we
dispatch a message handler and it returns negative or a set sd_bus_error
we send this as message error back to the client. This means errors
returned by handlers by default are given back to clients instead of
rippling all the way up to the event loop, which is desirable to make
things robust.
As a side-effect we can now easily turn the SELinux checks into normal
function calls, since the method call dispatcher will generate the right
error replies automatically now.
Also, make sure we always pass the error structure to all property and
method handlers as last argument to follow the usual style of passing
variables for return values as last argument.
|
|
|
|
This patch converts PID 1 to libsystemd-bus and thus drops the
dependency on libdbus. The only remaining code using libdbus is a test
case that validates our bus marshalling against libdbus' marshalling,
and this dependency can be turned off.
This patch also adds a couple of things to libsystem-bus, that are
necessary to make the port work:
- Synthesizing of "Disconnected" messages when bus connections are
severed.
- Support for attaching multiple vtables for the same interface on the
same path.
This patch also fixes the SetDefaultTarget() and GetDefaultTarget() bus
calls which used an inappropriate signature.
As a side effect we will now generate PropertiesChanged messages which
carry property contents, rather than just invalidation information.
|
|
|
|
each invocation
We can determine the list entry type via the typeof() gcc construct, and
so we should to make the macros much shorter to use.
|
|
reload/reexec of PID 1
Since we'll unload all units/job during a reload, and then readd them it
is really useful for clients to be aware of this phase hence sent a
signal out before and after. This signal is called "Reloading" (despite
the fact that it is also sent out during reexecution, which we consider
a special case in this context) and has one boolean parameter which is
true for the signal sent before the reload, and false for the signal
after the reload. The UnitRemoved/JobRremoved and UnitNew/JobNew due to
the reloading are guranteed to be between the pair of Reloading
messages.
|
|
While we are reloading we shouldn't suppress adding units to the bus
queue when there are no subscribers, simply because we might not have
deserialized the subscribers list yet. Hence, during reloading always
assume we have subscribers.
|
|
|
|
Replace the very generic cgroup hookup with a much simpler one. With
this change only the high-level cgroup settings remain, the ability to
set arbitrary cgroup attributes is removed, so is support for adding
units to arbitrary cgroup controllers or setting arbitrary paths for
them (especially paths that are different for the various controllers).
This also introduces a new -.slice root slice, that is the parent of
system.slice and friends. This enables easy admin configuration of
root-level cgrouo properties.
This replaces DeviceDeny= by DevicePolicy=, and implicitly adds in
/dev/null, /dev/zero and friends if DeviceAllow= is used (unless this is
turned off by DevicePolicy=).
|
|
|
|
When a trigger unit wants to know if a stop is queued for it, we should
just check precisely that and do not check whether it is actually
stopped already. This is because we use these checks usually from state
change calls where the state variables are not updated yet.
This change splits unit_pending_inactive() into two calls
unit_inactive_or_pending() and unit_stop_pending(). The former checks
state and pending jobs, the latter only pending jobs.
|
|
Before, we would initialize many fields twice: first
by filling the structure with zeros, and then a second
time with the real values. We can let the compiler do
the job for us, avoiding one copy.
A downside of this patch is that text gets slightly
bigger. This is because all zero() calls are effectively
inlined:
$ size build/.libs/systemd
text data bss dec hex filename
before 897737 107300 2560 1007597 f5fed build/.libs/systemd
after 897873 107300 2560 1007733 f6075 build/.libs/systemd
… actually less than 1‰.
A few asserts that the parameter is not null had to be removed. I
don't think this changes much, because first, it is quite unlikely
for the assert to fail, and second, an immediate SEGV is almost as
good as an assert.
|
|
Based on coverity report.
|
|
|
|
This is a followup to: commit 1a37b9b9043ef83e9900e460a9a1fccced3acf89
It will fix denial messages from dbus-daemon between gdm and
systemd-logind on logging into GNOME due to this.
See the previous commit for more details.
|
|
If XDG_RUNTIME_DIR contains a character like ":" (for instance if it's
formed from an X11 display name), then it isn't valid to substitute
it into a D-Bus address without escaping.
http://bugs.freedesktop.org/show_bug.cgi?id=60499
|
|
Note: I did s/MANAGER/SYSTEMD/ everywhere, even though it makes the
patch quite verbose. Nevertheless, keeping MANAGER prefix in some
places, and SYSTEMD prefix in others would just lead to confusion down
the road. Better to rip off the band-aid now.
|
|
|
|
times
This only adds the fields to the D-Bus interfaces but doesn't fill them
in with anything useful yet. Gummiboot exposes the necessary bits of
information to use however and as soon as I get my fingers on a proper
UEFI laptop I'll hook up the remaining bits.
Since we want to stabilize the D-Bus interface soon and include it in
the stability promise we should get the last fixes in, hence this change
now.
|
|
__secure_getenv() rather than getenv()
It's better to be safe than sorry.
|
|
also a number of minor fixups and bug fixes: spelling, oom errors
that didn't print errors, not properly forwarding error codes,
few more consistency issues, et cetera
|
|
glibc/glib both use "out of memory" consistantly so maybe we should
consider that instead of this.
Eliminates one string out of a number of binaries. Also fixes extra newline
in udev/scsi_id
|
|
context
|
|
Merging of jobs can result in more than one client being interested in a job.
|
|
We finally got the OK from all contributors with non-trivial commits to
relicense systemd from GPL2+ to LGPL2.1+.
Some udev bits continue to be GPL2+ for now, but we are looking into
relicensing them too, to allow free copy/paste of all code within
systemd.
The bits that used to be MIT continue to be MIT.
The big benefit of the relicensing is that closed source code may now
link against libsystemd-login.so and friends.
|
|
|
