| Age | Commit message (Collapse) | Author |
|---|
|
Previously we'd open the connection in the originating namespace, which
meant most peers of the bus would not be able to make sense of the
PID/UID/... identity of us since we didn't exist in the namespace they
run in. However they require this identity for privilege decisions,
hence disallowing access to anything from the host.
Instead, when connecting to a container, create a temporary subprocess,
make it join the container's namespace and then connect from there to
the kdbus instance. This is similar to how we do it for socket
conections already.
THis also unifies the namespacing code used by machinectl and the bus
APIs.
|
|
The only problem is that libgen.h #defines basename to point to it's
own broken implementation instead of the GNU one. This can be fixed
by #undefining basename.
|
|
|
|
PrivateTmp= namespaces
|
|
setting and make use of it where applicable
|
|
Pass on the line on which a section was decleared to the parsers, so they
can distinguish between multiple sections (if they chose to). Currently
no parsers take advantage of this, but a follow-up patch will do that
to distinguish
[Address]
Address=192.168.0.1/24
Label=one
[Address]
Address=192.168.0.2/24
Label=two
from
[Address]
Address=192.168.0.1/24
Label=one
Address=192.168.0.2/24
Label=two
|
|
|
|
This patch converts PID 1 to libsystemd-bus and thus drops the
dependency on libdbus. The only remaining code using libdbus is a test
case that validates our bus marshalling against libdbus' marshalling,
and this dependency can be turned off.
This patch also adds a couple of things to libsystem-bus, that are
necessary to make the port work:
- Synthesizing of "Disconnected" messages when bus connections are
severed.
- Support for attaching multiple vtables for the same interface on the
same path.
This patch also fixes the SetDefaultTarget() and GetDefaultTarget() bus
calls which used an inappropriate signature.
As a side effect we will now generate PropertiesChanged messages which
carry property contents, rather than just invalidation information.
|
|
|
|
|
|
We now treat passno as boleans in the generators, and don't need this any more. fsck itself
is able to sequentialize checks on the same local media, so in the common case the ordering
is redundant.
It is still possible to force an order by using .d fragments, in case that is desired.
|
|
each invocation
We can determine the list entry type via the typeof() gcc construct, and
so we should to make the macros much shorter to use.
|
|
The code was actually safe, because b should
never be null, because if rvalue is empty, a different
branch is taken. But we *do* check for NULL in the
loop above, so it's better to also check here for symmetry.
|
|
|
|
Previously to automatically create dependencies between mount units we
matched every mount unit agains all others resulting in O(n^2)
complexity. On setups with large amounts of mount units this might make
things slow.
This change replaces the matching code to use a hashtable that is keyed
by a path prefix, and points to a set of units that require that path to
be around. When a new mount unit is installed it is hence sufficient to
simply look up this set of units via its own file system paths to know
which units to order after itself.
This patch also changes all unit types to only create automatic mount
dependencies via the RequiresMountsFor= logic, and this is exposed to
the outside to make things more transparent.
With this change we still have some O(n) complexities in place when
handling mounts, but that's currently unavoidable due to kernel APIs,
and still substantially better than O(n^2) as before.
https://bugs.freedesktop.org/show_bug.cgi?id=69740
|
|
The cgroup attribute memory.soft_limit_in_bytes is unlikely to stay
around in the kernel for good, so let's not expose it for now. We can
readd something like it later when the kernel guys decided on a final
API for this.
|
|
Previously the specifier calls could only indicate OOM by returning
NULL. With this change they will return negative errno-style error codes
like everything else.
|
|
if we get BlockIOReadBandwidth="", we should only remove the
read-bandwidth-entries in blockio_device_bandwidths list.
|
|
BlockIOReadBandwidth and BlockIOWriteBandwidth both use
config_parse_blockio_bandwidth to set up CGroupBlockIODeviceBandwidth,
We should set the read value based on the left values
in config files.
|
|
--dump-configuration-items" shows
|
|
This way we can nicely map the configuration directive to properties and
back, without requiring two different signatures for the same property.
|
|
Transient units can be created via the bus API. They are configured via
the method call parameters rather than on-disk files. They are subject
to normal GC. Transient units currently may only be created for
services (however, we will extend this), and currently only ExecStart=
and the cgroup parameters can be configured (also to be extended).
Transient units require a unique name, that previously had no
configuration file on disk.
A tool systemd-run is added that makes use of this functionality to run
arbitrary command lines as transient services:
$ systemd-run /bin/ping www.heise.de
Will cause systemd to create a new transient service and run ping in it.
|
|
Replace the very generic cgroup hookup with a much simpler one. With
this change only the high-level cgroup settings remain, the ability to
set arbitrary cgroup attributes is removed, so is support for adding
units to arbitrary cgroup controllers or setting arbitrary paths for
them (especially paths that are different for the various controllers).
This also introduces a new -.slice root slice, that is the parent of
system.slice and friends. This enables easy admin configuration of
root-level cgrouo properties.
This replaces DeviceDeny= by DevicePolicy=, and implicitly adds in
/dev/null, /dev/zero and friends if DeviceAllow= is used (unless this is
turned off by DevicePolicy=).
|
|
This complements existing functionality of setting variables
through 'systemctl set-environment', the kernel command line,
and through normal environment variables for systemd in session
mode.
|
|
In order to prepare for the kernel cgroup rework, let's introduce a new
unit type to systemd, the "slice". Slices can be arranged in a tree and
are useful to partition resources freely and hierarchally by the user.
Each service unit can now be assigned to one of these slices, and later
on login users and machines may too.
Slices translate pretty directly to the cgroup hierarchy, and the
various objects can be assigned to any of the slices in the tree.
|
|
Disallow recursive .include, and make it unavailable in anything but
unit files.
|
|
Freeing in error path is the common pattern with set_put().
|
|
Instead of having explicit type-specific callbacks that inform the
triggering unit when a triggered unit changes state, make this generic
so that state changes are forwarded betwee any triggered and triggering
unit.
Also, get rid of UnitRef references from automount, timer, path units,
to the units they trigger and rely exclsuively on UNIT_TRIGGER type
dendencies.
|
|
http://lists.freedesktop.org/archives/systemd-devel/2013-April/010510.html
|
|
bus_error and bus_error_message_or_strerror dit almost exactly the same,
so use only one of them and place it in dbus-common.
|
|
|
|
The information about the unit for which files are being parsed
is passed all the way down. This way messages land in the journal
with proper UNIT=... or USER_UNIT=... attribution.
'systemctl status' and 'journalctl -u' not displaying those messages
has been a source of confusion for users, since the journal entry for
a misspelt setting was often logged quite a bit earlier than the
failure to start a unit.
Based-on-a-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
|
|
Internally we store all time values in usec_t, however parse_usec()
actually was used mostly to parse values in seconds (unless explicit
units were specified to define a different unit). Hence, be clear about
this and name the function about what we pass into it, not what we get
out of it.
|
|
C.f. http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=5975c725dfd6f7d36f493ab1453fbdbd35c1f0e3
|
|
Previously, it would set all caps, but it should drop them all, anything
else makes little sense.
Also, document that this works as it does, and what to do in order to
assign all caps to the bounding set.
https://bugzilla.redhat.com/show_bug.cgi?id=914705
|
|
don't misunderstand parse failures as OOM
http://lists.freedesktop.org/archives/systemd-devel/2013-February/009179.html
|
|
This introduces a new static list of known attributes and their special
semantics. This means that cgroup attribute values can now be
automatically translated from user to kernel notation for command line
set settings, too.
This also adds proper support for multi-line attributes.
|
|
|
|
|
|
In the x32 ABI, syscall numbers start at 0x40000000. Mask that bit on
x32 for lookups in the syscall_names array and syscall_filter and ensure
that syscall.h is parsed correctly.
[zj: added SYSCALL_TO_INDEX, INDEX_TO_SYSCALL macros.]
|
|
resetting the lists
https://bugzilla.redhat.com/show_bug.cgi?id=756787
|
|
|
|
|
|
during runtime
|
|
|
|
strncmp() could be used with size bigger then the size of the string,
because MAX was used instead of MIN.
If failing, print just the offending mount flag.
|
|
Whenever a message fails, mention the offending word, instead
of just giving the whole line. If one bad word causes just this
word to be rejected, print only the word. If one bad word causes
the whole line to be rejected, print the whole line too.
https://bugs.freedesktop.org/show_bug.cgi?id=56874
|
|
A service that only sets the scheduling policy to round-robin
fails to be started. This is because the cpu_sched_priority is
initialized to 0 and is not adjusted when the policy is changed.
Clamp the cpu_sched_priority when the scheduler policy is set. Use
the current policy to validate the new priority.
Change the manual page to state that the given range only applies
to the real-time scheduling policies.
Add a testcase that verifies this change:
$ make test-sched-prio; ./test-sched-prio
[test/sched_idle_bad.service:6] CPU scheduling priority is out of range, ignoring: 1
[test/sched_rr_bad.service:7] CPU scheduling priority is out of range, ignoring: 0
[test/sched_rr_bad.service:8] CPU scheduling priority is out of range, ignoring: 100
|
|
|
|
Some commands (like 'find') take a semicolon as separate arg. With
current parser implementation there is no way to pass one.
Patch adds token \;
|
