| Age | Commit message (Collapse) | Author |
|---|
|
BlockIOReadBandwidth and BlockIOWriteBandwidth both use
config_parse_blockio_bandwidth to set up CGroupBlockIODeviceBandwidth,
We should set the read value based on the left values
in config files.
|
|
--dump-configuration-items" shows
|
|
This way we can nicely map the configuration directive to properties and
back, without requiring two different signatures for the same property.
|
|
Transient units can be created via the bus API. They are configured via
the method call parameters rather than on-disk files. They are subject
to normal GC. Transient units currently may only be created for
services (however, we will extend this), and currently only ExecStart=
and the cgroup parameters can be configured (also to be extended).
Transient units require a unique name, that previously had no
configuration file on disk.
A tool systemd-run is added that makes use of this functionality to run
arbitrary command lines as transient services:
$ systemd-run /bin/ping www.heise.de
Will cause systemd to create a new transient service and run ping in it.
|
|
Replace the very generic cgroup hookup with a much simpler one. With
this change only the high-level cgroup settings remain, the ability to
set arbitrary cgroup attributes is removed, so is support for adding
units to arbitrary cgroup controllers or setting arbitrary paths for
them (especially paths that are different for the various controllers).
This also introduces a new -.slice root slice, that is the parent of
system.slice and friends. This enables easy admin configuration of
root-level cgrouo properties.
This replaces DeviceDeny= by DevicePolicy=, and implicitly adds in
/dev/null, /dev/zero and friends if DeviceAllow= is used (unless this is
turned off by DevicePolicy=).
|
|
This complements existing functionality of setting variables
through 'systemctl set-environment', the kernel command line,
and through normal environment variables for systemd in session
mode.
|
|
In order to prepare for the kernel cgroup rework, let's introduce a new
unit type to systemd, the "slice". Slices can be arranged in a tree and
are useful to partition resources freely and hierarchally by the user.
Each service unit can now be assigned to one of these slices, and later
on login users and machines may too.
Slices translate pretty directly to the cgroup hierarchy, and the
various objects can be assigned to any of the slices in the tree.
|
|
Disallow recursive .include, and make it unavailable in anything but
unit files.
|
|
Freeing in error path is the common pattern with set_put().
|
|
Instead of having explicit type-specific callbacks that inform the
triggering unit when a triggered unit changes state, make this generic
so that state changes are forwarded betwee any triggered and triggering
unit.
Also, get rid of UnitRef references from automount, timer, path units,
to the units they trigger and rely exclsuively on UNIT_TRIGGER type
dendencies.
|
|
http://lists.freedesktop.org/archives/systemd-devel/2013-April/010510.html
|
|
bus_error and bus_error_message_or_strerror dit almost exactly the same,
so use only one of them and place it in dbus-common.
|
|
|
|
The information about the unit for which files are being parsed
is passed all the way down. This way messages land in the journal
with proper UNIT=... or USER_UNIT=... attribution.
'systemctl status' and 'journalctl -u' not displaying those messages
has been a source of confusion for users, since the journal entry for
a misspelt setting was often logged quite a bit earlier than the
failure to start a unit.
Based-on-a-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
|
|
Internally we store all time values in usec_t, however parse_usec()
actually was used mostly to parse values in seconds (unless explicit
units were specified to define a different unit). Hence, be clear about
this and name the function about what we pass into it, not what we get
out of it.
|
|
C.f. http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=5975c725dfd6f7d36f493ab1453fbdbd35c1f0e3
|
|
Previously, it would set all caps, but it should drop them all, anything
else makes little sense.
Also, document that this works as it does, and what to do in order to
assign all caps to the bounding set.
https://bugzilla.redhat.com/show_bug.cgi?id=914705
|
|
don't misunderstand parse failures as OOM
http://lists.freedesktop.org/archives/systemd-devel/2013-February/009179.html
|
|
This introduces a new static list of known attributes and their special
semantics. This means that cgroup attribute values can now be
automatically translated from user to kernel notation for command line
set settings, too.
This also adds proper support for multi-line attributes.
|
|
|
|
|
|
In the x32 ABI, syscall numbers start at 0x40000000. Mask that bit on
x32 for lookups in the syscall_names array and syscall_filter and ensure
that syscall.h is parsed correctly.
[zj: added SYSCALL_TO_INDEX, INDEX_TO_SYSCALL macros.]
|
|
resetting the lists
https://bugzilla.redhat.com/show_bug.cgi?id=756787
|
|
|
|
|
|
during runtime
|
|
|
|
strncmp() could be used with size bigger then the size of the string,
because MAX was used instead of MIN.
If failing, print just the offending mount flag.
|
|
Whenever a message fails, mention the offending word, instead
of just giving the whole line. If one bad word causes just this
word to be rejected, print only the word. If one bad word causes
the whole line to be rejected, print the whole line too.
https://bugs.freedesktop.org/show_bug.cgi?id=56874
|
|
A service that only sets the scheduling policy to round-robin
fails to be started. This is because the cpu_sched_priority is
initialized to 0 and is not adjusted when the policy is changed.
Clamp the cpu_sched_priority when the scheduler policy is set. Use
the current policy to validate the new priority.
Change the manual page to state that the given range only applies
to the real-time scheduling policies.
Add a testcase that verifies this change:
$ make test-sched-prio; ./test-sched-prio
[test/sched_idle_bad.service:6] CPU scheduling priority is out of range, ignoring: 1
[test/sched_rr_bad.service:7] CPU scheduling priority is out of range, ignoring: 0
[test/sched_rr_bad.service:8] CPU scheduling priority is out of range, ignoring: 100
|
|
|
|
Some commands (like 'find') take a semicolon as separate arg. With
current parser implementation there is no way to pass one.
Patch adds token \;
|
|
The behaviour of the common name##_from_string conversion is surprising.
It accepts not only the strings from name##_table but also any number
that falls within the range of the table. The order of items in most of
our tables is an internal affair. It should not be visible to the user.
I know of a case where the surprising numeric conversion leads to a crash.
We will allow the direct numeric conversion only for the tables where the
mapping of strings to numeric values has an external meaning. This holds
for the following lookup tables:
- netlink_family, ioprio_class, ip_tos, sched_policy - their numeric
values are stable as they are defined by the Linux kernel interface.
- log_level, log_facility_unshifted - the well-known syslog interface.
We allow the user to use numeric values whose string names systemd does
not know. For instance, the user may want to test a new kernel featuring
a scheduling policy that did not exist when his systemd version was
released. A slightly unpleasant effect of this is that the
name##_to_string conversion cannot return pointers to constant strings
anymore. The strings have to be allocated on demand and freed by the
caller.
|
|
to IPv4/IPv6
|
|
|
|
|
|
and make use of it
|
|
Add specifier expansion to Path and String conditions.
Specifier expansion for conditions will help create instance
and user session units by allowing us to template conditions
based on the instance or user session parameters.
An example would be a system-wide user session service file
that conditionally runs based on whether a user has the
service configured through a configuration file in ~/.config/.
|
|
|
|
|
|
Makes possible to specify separate timeout for start and stop of
the service.
[ Improved the manpage. Coding style fix. -- michich ]
|
|
There is no point in clearing the bits of a "struct stat" when the very
next statement just calls stat or fstat to fill in that same memory.
[zj: two more places]
|
|
|
|
|
|
|
|
Names= is a source of errors, simply because alias names specified like
this only become relevant after a unit has been loaded but cannot be
used to load a unit.
Let's get rid of the confusion and drop this field. To establish alias
names peope should use symlinks, which have the the benefit of being
useful as key to load a unit, even though they are not taken into
account if unit names are listed but they haven't been explicitly
referenced before.
|
|
Add possibility to specify timeout for oneshot services.
[ https://bugzilla.redhat.com/show_bug.cgi?id=761656
Added minor fixups. -- michich ]
|
|
console forwarding
|
|
|
|
This also ensures that caps dropped from the bounding set are also
dropped from the inheritable set, to be extra-secure. Usually that should
change very little though as the inheritable set is empty for all our uses
anyway.
|
