summaryrefslogtreecommitdiff
path: root/src/core/load-fragment.h
AgeCommit message (Collapse)Author
2014-03-07busname: add parser for bus name policiesDaniel Mack
There are three directives to specify bus name polices in .busname files: * AllowUser [username] [access] * AllowGroup [groupname] [access] * AllowWorld [access] Where [access] is one of * 'see': The user/group/world is allowed to see a name on the bus * 'talk': The user/group/world is allowed to talk to a name * 'own': The user/group/world is allowed to own a name There is no user added yet in this commit.
2014-03-05core: don't override NoNewPriviliges= from SystemCallFilter= if it is ↵Lennart Poettering
already explicitly set
2014-03-03conf-parser: config_parse_path_strv() is not generic, so let's move it into ↵Lennart Poettering
load-fragment.c The parse code actually checked for specific lvalue names, which is really wrong for supposedly generic parsers...
2014-03-03core: move config_parse_set_status() into load-fragment.cLennart Poettering
Let's keep specific config parsers close to where they are needed. Only the really generic ones should be defined in conf-parser.[ch].
2014-03-03core: introduce new RuntimeDirectory= and RuntimeDirectoryMode= unit settingsLennart Poettering
As discussed on the ML these are useful to manage runtime directories below /run for services.
2014-02-26core: add new RestrictAddressFamilies= switchLennart Poettering
This new unit settings allows restricting which address families are available to processes. This is an effective way to minimize the attack surface of services, by turning off entire network stacks for them. This is based on seccomp, and does not work on x86-32, since seccomp cannot filter socketcall() syscalls on that platform.
2014-02-21core: Add AppArmor profile switchingMichael Scherer
This permit to switch to a specific apparmor profile when starting a daemon. This will result in a non operation if apparmor is disabled. It also add a new build requirement on libapparmor for using this feature.
2014-02-19core: add Personality= option for units to set the personality for spawned ↵Lennart Poettering
processes
2014-02-17core: store and expose SELinuxContext field normalized as bool + stringLennart Poettering
2014-02-13core: add SystemCallArchitectures= unit setting to allow disabling of non-nativeLennart Poettering
architecture support for system calls Also, turn system call filter bus properties into complex types instead of concatenated strings.
2014-02-12core: rework syscall filterLennart Poettering
- Allow configuration of an errno error to return from blacklisted syscalls, instead of immediately terminating a process. - Fix parsing logic when libseccomp support is turned off - Only keep the actual syscall set in the ExecContext, and generate the string version only on demand.
2013-12-02bus: add .busname unit type to implement kdbus-style bus activationLennart Poettering
2013-11-26core: replace OnFailureIsolate= setting by a more generic OnFailureJobMode= ↵Lennart Poettering
setting and make use of it where applicable
2013-11-25conf-parser: distinguish between multiple sections with the same nameTom Gundersen
Pass on the line on which a section was decleared to the parsers, so they can distinguish between multiple sections (if they chose to). Currently no parsers take advantage of this, but a follow-up patch will do that to distinguish [Address] Address=192.168.0.1/24 Label=one [Address] Address=192.168.0.2/24 Label=two from [Address] Address=192.168.0.1/24 Label=one Address=192.168.0.2/24 Label=two
2013-10-19mount/service: drop FsckPassNo supportTom Gundersen
We now treat passno as boleans in the generators, and don't need this any more. fsck itself is able to sequentialize checks on the same local media, so in the common case the ordering is redundant. It is still possible to force an order by using .d fragments, in case that is desired.
2013-07-11cgroup: split out per-device BlockIOWeight= setting into BlockIODeviceWeight=Lennart Poettering
This way we can nicely map the configuration directive to properties and back, without requiring two different signatures for the same property.
2013-06-27core: general cgroup reworkLennart Poettering
Replace the very generic cgroup hookup with a much simpler one. With this change only the high-level cgroup settings remain, the ability to set arbitrary cgroup attributes is removed, so is support for adding units to arbitrary cgroup controllers or setting arbitrary paths for them (especially paths that are different for the various controllers). This also introduces a new -.slice root slice, that is the parent of system.slice and friends. This enables easy admin configuration of root-level cgrouo properties. This replaces DeviceDeny= by DevicePolicy=, and implicitly adds in /dev/null, /dev/zero and friends if DeviceAllow= is used (unless this is turned off by DevicePolicy=).
2013-06-17core: add new .slice unit type for partitioning systemsLennart Poettering
In order to prepare for the kernel cgroup rework, let's introduce a new unit type to systemd, the "slice". Slices can be arranged in a tree and are useful to partition resources freely and hierarchally by the user. Each service unit can now be assigned to one of these slices, and later on login users and machines may too. Slices translate pretty directly to the cgroup hierarchy, and the various objects can be assigned to any of the slices in the tree.
2013-04-23unit: rework trigger dependency logicLennart Poettering
Instead of having explicit type-specific callbacks that inform the triggering unit when a triggered unit changes state, make this generic so that state changes are forwarded betwee any triggered and triggering unit. Also, get rid of UnitRef references from automount, timer, path units, to the units they trigger and rely exclsuively on UNIT_TRIGGER type dendencies.
2013-04-17Report about syntax errors with metadataZbigniew Jędrzejewski-Szmek
The information about the unit for which files are being parsed is passed all the way down. This way messages land in the journal with proper UNIT=... or USER_UNIT=... attribution. 'systemctl status' and 'journalctl -u' not displaying those messages has been a source of confusion for users, since the journal entry for a misspelt setting was often logged quite a bit earlier than the failure to start a unit. Based-on-a-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
2013-02-27unit: rework resource management APILennart Poettering
This introduces a new static list of known attributes and their special semantics. This means that cgroup attribute values can now be automatically translated from user to kernel notation for command line set settings, too. This also adds proper support for multi-line attributes.
2013-02-11core: properly validate environment data from Environment= lines in unit filesLennart Poettering
2012-07-19use #pragma once instead of foo*foo #define guardsShawn Landden
#pragma once has been "un-deprecated" in gcc since 3.3, and is widely supported in other compilers. I've been using and maintaining (rebasing) this patch for a while now, as it annoyed me to see #ifndef fooblahfoo, etc all over the place, almost arrogant about the annoyance of having to define all these names to perform a commen but neccicary functionality, when a completely superior alternative exists. I havn't sent it till now, cause its kindof a style change, and it is bad voodoo to mess with style that has been established by more established editors. So feel free to lambast me as a crazy bafoon. v2 - preserve externally used headers
2012-07-17execute: support syscall filtering using seccomp filtersLennart Poettering
2012-06-22unit: drop the Names= optionLennart Poettering
Names= is a source of errors, simply because alias names specified like this only become relevant after a unit has been loaded but cannot be used to load a unit. Let's get rid of the confusion and drop this field. To establish alias names peope should use symlinks, which have the the benefit of being useful as key to load a unit, even though they are not taken into account if unit names are listed but they haven't been explicitly referenced before.
2012-06-15service: timeout for oneshot servicesLukas Nykryn
Add possibility to specify timeout for oneshot services. [ https://bugzilla.redhat.com/show_bug.cgi?id=761656 Added minor fixups. -- michich ]
2012-06-01journal: allow setting of a cutoff log level for disk storage, syslog, kmsg, ↵Lennart Poettering
console forwarding
2012-05-31util: introduce a proper nsec_t and make use of it where appropriateLennart Poettering
2012-05-24main: add configuration option to alter capability bounding set for PID 1Lennart Poettering
This also ensures that caps dropped from the bounding set are also dropped from the inheritable set, to be extra-secure. Usually that should change very little though as the inheritable set is empty for all our uses anyway.
2012-05-21units: introduce new Documentation= field and make use of it everywhereLennart Poettering
This should help making the boot process a bit easier to explore and understand for the administrator. The simple idea is that "systemctl status" now shows a link to documentation alongside the other status and decriptionary information of a service. This patch adds the necessary fields to all our shipped units if we have proper documentation for them.
2012-04-30unit: add new dependency type RequiresMountsFor=Lennart Poettering
RequiresMountsFor= is a shortcut for adding requires and after dependencies to all mount units neeed for the specified paths. This solves a couple of issues regarding dep loop cycles for encrypted swap.
2012-04-12relicense to LGPLv2.1 (with exceptions)Lennart Poettering
We finally got the OK from all contributors with non-trivial commits to relicense systemd from GPL2+ to LGPL2.1+. Some udev bits continue to be GPL2+ for now, but we are looking into relicensing them too, to allow free copy/paste of all code within systemd. The bits that used to be MIT continue to be MIT. The big benefit of the relicensing is that closed source code may now link against libsystemd-login.so and friends.
2012-04-11move libsystemd_core.la sources into core/Kay Sievers