| Age | Commit message (Collapse) | Author |
|---|
|
Use the new code in config_parse_cpu_affinity2.
Tested by modifying CPUAffinity=... setting in /etc/systemd/system.conf
and reloading the daemon, then checking ^Cpus_allowed in /proc/1/status
to confirm the correct CPU mask is in place.
|
|
Shutting down a user session currently fails with:
Sep 22 22:35:38 david-t2 systemd[640]: Reached target Shutdown.
Sep 22 22:35:38 david-t2 systemd[640]: Starting Exit the Session...
Sep 22 22:35:38 david-t2 systemd[640]: Received SIGRTMIN+24 from PID 659 (kill).
Sep 22 22:35:38 david-t2 systemd[640]: Shutting down.
Sep 22 22:35:38 david-t2 systemd[640]: Not executed by init (PID 1).
Sep 22 22:35:38 david-t2 systemd[640]: Critical error while doing system shutdown: Operation not permitted
This is a regression from:
commit 287419c119ef961db487a281162ab037eba70c61
Author: Alban Crequy <alban.crequy@gmail.com>
Date: Fri Sep 18 13:37:34 2015 +0200
containers: systemd exits with non-zero code
Make sure we never ever execute systemd-shutdown from within a
user-manager. Restore the previous behavior by partially reverting given
commit.
|
|
Let's underline the header line of the table shown by cgtop, how it is
customary for tables. In order to do this, let's introduce new ANSI
underline macros, and clean up the existing ones as side effect.
|
|
When a systemd service running in a container exits with a non-zero
code, it can be useful to terminate the container immediately and get
the exit code back to the host, when systemd-nspawn returns. This was
not possible to do. This patch adds the following to make it possible:
- Add a read-only "ExitCode" property on PID 1's "Manager" bus object.
By default, it is 0 so the behaviour stays the same as previously.
- Add a method "SetExitCode" on the same object. The method fails when
called on baremetal: it is only allowed in containers or in user
session.
- Add support in systemctl to call "systemctl exit 42". It reuses the
existing code for user session.
- Add exit.target and systemd-exit.service to the system instance.
- Change main() to actually call systemd-shutdown to exit() with the
correct value.
- Add verb 'exit' in systemd-shutdown with parameter --exit-code
- Update systemctl manpage.
I used the following to test it:
| $ sudo rkt --debug --insecure-skip-verify run \
| --mds-register=false --local docker://busybox \
| --exec=/bin/chroot -- /proc/1/root \
| systemctl --force exit 42
| ...
| Container rkt-895a0cba-5c66-4fa5-831c-e3f8ddc5810d failed with error code 42.
| $ echo $?
| 42
Fixes https://github.com/systemd/systemd/issues/1290
|
|
This adds support for the new "pids" cgroup controller of 4.3 kernels.
It allows accounting the number of tasks in a cgroup and enforcing
limits on it.
This adds two new setting TasksAccounting= and TasksMax= to each unit,
as well as a gloabl option DefaultTasksAccounting=.
This also updated "cgtop" to optionally make use of the new
kernel-provided accounting.
systemctl has been updated to show the number of tasks for each service
if it is available.
This patch also adds correct support for undoing memory limits for units
using a MemoryLimit=infinity syntax. We do the same for TasksMax= now
and hence keep things in sync here.
|
|
And set_free() too.
Another Coccinelle patch.
|
|
util: introduce safe_fclose() and port everything over to it
|
|
Adds a coccinelle script to port things over automatically.
|
|
Coccinelle fixes 2
|
|
Let's also clean up single-line while and for blocks.
|
|
The mount monitor that was added to libmount v2.27 requires /etc/mtab to be
non-existant. As systemd now uses that functionality, we cannot monitor any
mounts anymore, and hence not support .mount units.
Systems that have /etc/mtab around as regular file are unsupported by
systemd since a long time.
This patch makes that condition fatal, so we do not boot up with
non-working mount monitor support.
|
|
Patch via coccinelle.
|
|
This replaces this:
free(p);
p = NULL;
by this:
p = mfree(p);
Change generated using coccinelle. Semantic patch is added to the
sources.
|
|
Introduce a proper enum, and don't pass around string ids anymore. This
simplifies things quite a bit, and makes virtualization detection more
similar to architecture detection.
|
|
Getting rid of FOREACH_WORD_QUOTED and some more cleanup in config_parse_cpu_affinity2
|
|
|
|
More cgroup fixes
|
|
A number of simplications and adjustments to brings things closer to our
coding style.
|
|
|
|
|
|
Related to the TODO item to replace FOREACH_WORD_QUOTED with it.
Tested by setting `JoinControllers=cpu,cpuacct,memory net_cls,blkio' in
/etc/systemd/system.conf, rebooting the system with the patched binaries
and checking that the desired setup was created by inspecting the
entries under /sys/fs/cgroup.
No regressions observed in test cases.
|
|
Make use of it in config_parse_cpu_affinity2.
Tested by tweaking the `CPUAffinity' setting in /etc/systemd/system.conf
and reloading the daemon to confirm it is working as expected.
No regressions observed in test cases.
|
|
Related to the TODO item to replace FOREACH_WORD_QUOTED with it.
Tested by setting `CPUAfinity=0 1' (and other similar settings) in
/etc/systemd/system.conf, booting the system with the patched binaries
(and also using `systemctl daemon-reload` to reconfigure) and checking
that /proc/1/status indicates only CPUs 0 and 1 are allowed for PID 1.
No regressions observed in test cases.
|
|
|
|
Signed-off-by: Jan Pokorný <jpokorny@redhat.com>
|
|
Pretty trivial helper which wraps free() but returns NULL, so we can
simplify this:
free(foobar);
foobar = NULL;
to this:
foobar = mfree(foobar);
|
|
"systemctl daemon-reload" should also update the manager defaults from
/etc/systemd/system.conf.
For details, see:
http://lists.freedesktop.org/archives/systemd-devel/2015-June/033062.html
Amended to use manager_set_defaults() as common function.
|
|
Merge write_string_file(), write_string_file_no_create() and
write_string_file_atomic() into write_string_file() and provide a flags mask
that allows combinations of atomic writing, newline appending and automatic
file creation. Change all users accordingly.
|
|
When shutting down, if systemd was started with --log-target=null,
systemd-shutdown was being called with --log-target=console.
|
|
mask/handlers
Also, when the child is potentially long-running make sure to set a
death signal.
Also, ignore the result of the reset operations explicitly by casting
them to (void).
|
|
This made sense when systemd ran on older kernels, nowdays not so much.
|
|
No functional changes.
|
|
|
|
This means any existing enabled units well be preserved and no
pre-created symlinks will be removed. This is done on first boot, when
the assumption is that /etc is not populated at all (no machine-id
setup). For minimal containers that gives a significant first boot
speed up, approximately ~20ms / ~16% in my trials.
|
|
It's primarily just a property of the Manager object after all, and we
try to refer to PID 1 as "manager" instead of "systemd", hence let's to
stick to this here too.
|
|
This changes log_unit_info() (and friends) to take a real Unit* object
insted of just a unit name as parameter. The call will now prefix all
logged messages with the unit name, thus allowing the unit name to be
dropped from the various passed romat strings, simplifying invocations
drastically, and unifying log output across messages. Also, UNIT= vs.
USER_UNIT= is now derived from the Manager object attached to the Unit
object, instead of getpid(). This has the benefit of correcting the
field for --test runs.
Also contains a couple of other logging improvements:
- Drops a couple of strerror() invocations in favour of using %m.
- Not only .mount units now warn if a symlinks exist for the mount
point already, .automount units do that too, now.
- A few invocations of log_struct() that didn't actually pass any
additional structured data have been replaced by simpler invocations
of log_unit_info() and friends.
- For structured data a new LOG_UNIT_MESSAGE() macro has been added,
that works like LOG_MESSAGE() but prefixes the message with the unit
name. Similar, there's now LOG_LINK_MESSAGE() and
LOG_NETDEV_MESSAGE().
- For structured data new LOG_UNIT_ID(), LOG_LINK_INTERFACE(),
LOG_NETDEV_INTERFACE() macros have been added that generate the
necessary per object fields. The old log_unit_struct() call has been
removed in favour of these new macros used in raw log_struct()
invocations. In addition to removing one more function call this
allows generated structured log messages that contain two object
fields, as necessary for example for network interfaces that are
joined into another network interface, and whose messages shall be
indexed by both.
- The LOG_ERRNO() macro has been removed, in favour of
log_struct_errno(). The latter has the benefit of ensuring that %m in
format strings is properly resolved to the specified error number.
- A number of logging messages have been converted to use
log_unit_info() instead of log_info()
- The client code in sysv-generator no longer #includes core code from
src/core/.
- log_unit_full_errno() has been removed, log_unit_full() instead takes
an errno now, too.
- log_unit_info(), log_link_info(), log_netdev_info() and friends, now
avoid double evaluation of their parameters
|
|
|
|
|
|
|
|
|
|
Even if plymouth is running, it might have not displayed the splash yet,
so we'll see a few lines on fbcon when we should have otherwise had
nothing.
Plymouth integration was added to systemd in commit
6faa11140bf776cdaeb8d22d01816e6e48296971. That same day, Plymouth got
systemd integration [0]. As such, the Plymouth integration has always
been obsolete, and was probably only for older Plymouth's. But I can't
imagine anybody running a Plymouth from 2011 with a systemd from 2015.
Remove the Plymouth/systemd integration, and let Plymouth's code tell
systemd to print the details.
[0] http://cgit.freedesktop.org/plymouth/commit/?id=537c16422cd49f1beeaab1ad39846a00018faec1
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Cc: Daniel Drake <dsd@endlessm.com>
Cc: Ray Strode <rstrode@redhat.com>
|
|
|
|
Quotes are useful when the string can contain spaces or be otherwise
confusing. Not possible with those two.
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
With this change runlevel 2, 3, 4 are mapped to multi-user.target for
good, and 5 to graphical.target. This was already the previous mapping
but is now no longer reconfigurable, but hard-coded into the core.
This should generally simplify things, but also fix one bug: the
sysv-generator previously generated symlinks to runlevel[2-5].target
units, which possibly weren't picked up if these aliases were otherwise
only referenced by the real names "multi-user.target" and
"graphical.target".
We keep compat aliases "runlevel[2345].target" arround for cases where
this target name is explicitly requested.
|
|
Better safe than sorry, if drivers are stupid, and reset immediately on
device closing if the timeout could not be initialized.
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=777735
|
|
quiet should really just have an effect on the stuff we dump on the
console, not what we log elsewhere.
Hence:
debug on kernel cmdline → interpreted by every tool, turns up
log levels to "debug" everywhere.
quiet on kernel cmdline → interpreted only by PID 1 (and
obviously the kernel) no alteration of the max log level, but
turns off status output.
http://lists.freedesktop.org/archives/systemd-devel/2014-December/026271.html
|
|
|
|
If we scale our buffer to be wide enough for the format string, we
should expect that the calculation was correct.
char_array_0() invocations are removed, since snprintf nul-terminates
the output in any case.
A similar wrapper is used for strftime calls, but only in timedatectl.c.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=88284
|
