| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
Also for log_error() except where a specific error is specified
e.g. errno ? strerror(errno) : "Some user specified message"
|
|
when not active
This way, we can avoid executing two /bin/swapon jobs to be dispatched
for the same swap device if it is configured for two different paths.
Previously we were just tracking the device nodes of active swap
devices, which would not allow us to recognize the identity of two swap
devices before they are active.
https://bugs.freedesktop.org/show_bug.cgi?id=69835
|
|
|
|
Always read all external events before we decide what we do next.
|
|
|
|
|
|
Given that plymouth listens on an abstract namespace socket and if
CLONE_NEWNET is not used the abstract namespace is shared with the host
we might actually end up send plymouth data to the host.
|
|
This patch converts PID 1 to libsystemd-bus and thus drops the
dependency on libdbus. The only remaining code using libdbus is a test
case that validates our bus marshalling against libdbus' marshalling,
and this dependency can be turned off.
This patch also adds a couple of things to libsystem-bus, that are
necessary to make the port work:
- Synthesizing of "Disconnected" messages when bus connections are
severed.
- Support for attaching multiple vtables for the same interface on the
same path.
This patch also fixes the SetDefaultTarget() and GetDefaultTarget() bus
calls which used an inappropriate signature.
As a side effect we will now generate PropertiesChanged messages which
carry property contents, rather than just invalidation information.
|
|
If there are no more jobs on console, no need/we shouldn't disable output.
|
|
"make check-api-unused" informs us about code that is not used anymore
or that is exported but only used internally. Fix these all over the
place.
|
|
|
|
$ touch src/core/dbus.c; make CFLAGS=-O0
make --no-print-directory all-recursive
Making all in .
CC src/core/libsystemd_core_la-dbus.lo
CCLD libsystemd-core.la
$ touch src/core/dbus.c; make CFLAGS=-Og
make --no-print-directory all-recursive
Making all in .
CC src/core/libsystemd_core_la-dbus.lo
src/core/dbus.c: In function 'init_registered_system_bus':
src/core/dbus.c:798:18: warning: 'id' may be used uninitialized in this function [-Wmaybe-uninitialized]
dbus_free(id);
^
CCLD libsystemd-core.la
-Og Optimize debugging experience. -Og enables optimizations that do
not interfere with debugging. It should be the optimization level of
choice for the standard edit-compile-debug cycle, offering a
reasonable level of optimization while maintaining fast compilation
and a good debugging experience.
|
|
each invocation
We can determine the list entry type via the typeof() gcc construct, and
so we should to make the macros much shorter to use.
|
|
Because that's exactly the kind of situation where the private bus is
necessary.
|
|
|
|
Also, we need to use proper strv_env_xyz() calls when putting together
the environment array, since otherwise settings won't be properly
overriden.
And let's get rid of strv_appendf(), is overkill and there was only one
user.
|
|
Previously to automatically create dependencies between mount units we
matched every mount unit agains all others resulting in O(n^2)
complexity. On setups with large amounts of mount units this might make
things slow.
This change replaces the matching code to use a hashtable that is keyed
by a path prefix, and points to a set of units that require that path to
be around. When a new mount unit is installed it is hence sufficient to
simply look up this set of units via its own file system paths to know
which units to order after itself.
This patch also changes all unit types to only create automatic mount
dependencies via the RequiresMountsFor= logic, and this is exposed to
the outside to make things more transparent.
With this change we still have some O(n) complexities in place when
handling mounts, but that's currently unavoidable due to kernel APIs,
and still substantially better than O(n^2) as before.
https://bugs.freedesktop.org/show_bug.cgi?id=69740
|
|
Prefer firmware-provided performance data over loader-exported ones; if
ACPI data is available, always use it, otherwise try to read the loader
data.
The firmware-provided variables start at the time the first EFI image
is executed and end when the operating system exits the boot services;
the (loader) time calculated in systemd-analyze increases.
|
|
|
|
|
|
Stop importing non-sensical kernel-exported variables. All
parameters in the kernel command line are exported to the
initial environment of PID1, but suppressed if they are
recognized by kernel built-in code. The EFI booted kernel
will add further kernel-internal things which do not belong
into userspace.
The passed original environ data of the process is not touched
and preserved across re-execution, to allow external reading of
/proc/self/environ for process properties like container*=.
|
|
|
|
Make Type=idle communication bidirectional: when bootup is finished,
the manager, as before, signals idling Type=idle jobs to continue.
However, if the boot takes too long, idling jobs signal the manager
that they have had enough, wait a tiny bit more, and continue, taking
ownership of the console. The manager, when signalled that Type=idle
jobs are done, makes a note and will not write to the console anymore.
This is a cosmetic issue, but quite noticable, so let's just fix it.
Based on Harald Hoyer's patch.
https://bugs.freedesktop.org/show_bug.cgi?id=54247
http://unix.stackexchange.com/questions/51805/systemd-messages-after-starting-login/
|
|
reload/reexec of PID 1
Since we'll unload all units/job during a reload, and then readd them it
is really useful for clients to be aware of this phase hence sent a
signal out before and after. This signal is called "Reloading" (despite
the fact that it is also sent out during reexecution, which we consider
a special case in this context) and has one boolean parameter which is
true for the signal sent before the reload, and false for the signal
after the reload. The UnitRemoved/JobRremoved and UnitNew/JobNew due to
the reloading are guranteed to be between the pair of Reloading
messages.
|
|
|
|
Since we should allow registering/unregistering transient units with the
same name in a tight-loop, we need to make the GC more aggressive, so
that dead units are cleaned up immediately instead of later.
hence, execute the GC sweep on every event loop iteration and clean up
units. This of course, means we need to be careful with adding units to
the GC queue, which we already are since we execute check_gc() of each
unit type already when adding something to the queue.
|
|
|
|
Transient units can be created via the bus API. They are configured via
the method call parameters rather than on-disk files. They are subject
to normal GC. Transient units currently may only be created for
services (however, we will extend this), and currently only ExecStart=
and the cgroup parameters can be configured (also to be extended).
Transient units require a unique name, that previously had no
configuration file on disk.
A tool systemd-run is added that makes use of this functionality to run
arbitrary command lines as transient services:
$ systemd-run /bin/ping www.heise.de
Will cause systemd to create a new transient service and run ping in it.
|
|
Replace the very generic cgroup hookup with a much simpler one. With
this change only the high-level cgroup settings remain, the ability to
set arbitrary cgroup attributes is removed, so is support for adding
units to arbitrary cgroup controllers or setting arbitrary paths for
them (especially paths that are different for the various controllers).
This also introduces a new -.slice root slice, that is the parent of
system.slice and friends. This enables easy admin configuration of
root-level cgrouo properties.
This replaces DeviceDeny= by DevicePolicy=, and implicitly adds in
/dev/null, /dev/zero and friends if DeviceAllow= is used (unless this is
turned off by DevicePolicy=).
|
|
|
|
This complements existing functionality of setting variables
through 'systemctl set-environment', the kernel command line,
and through normal environment variables for systemd in session
mode.
|
|
This will add another color to the legend called "Loading unit files"
Like the generators it will mark a part of the systemd bar indicating
the time spent while loading unit files.
|
|
|
|
--system is default anyway, and some poor user might type 9
characters without needing to.
|
|
This partially reverts commit c3a170f3, which moved
efi_get_boot_timestamps too early in main(), before
/sys is assured to be mounted
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64371
[tomegun: in particular /sys/firmware/efi/efivars needs to be
mounted, which is not a problem if a systemd-initramfs containing
the correct module is being used. But not everyone uses an
initramfs...]
|
|
This makes ctrl-alt-del reboots more robust, just like "systemctl
reboot".
|
|
When a trigger unit wants to know if a stop is queued for it, we should
just check precisely that and do not check whether it is actually
stopped already. This is because we use these checks usually from state
change calls where the state variables are not updated yet.
This change splits unit_pending_inactive() into two calls
unit_inactive_or_pending() and unit_stop_pending(). The former checks
state and pending jobs, the latter only pending jobs.
|
|
The time for systemd initialization and selinux policy loading
is accounted to the initrd or the kernel, which is wrong.
Instead of:
Startup finished in 5.559s (firmware) + 36ms (loader) + 665ms (kernel) +
975ms (initrd) + 1.410s (userspace) = 8.647s
the more correct output is:
Startup finished in 5.559s (firmware) + 36ms (loader) + 665ms (kernel) +
475ms (initrd) + 1.910s (userspace) = 8.647s
|
|
Freeing in error path is the common pattern with set_put().
|
|
http://lists.freedesktop.org/archives/systemd-devel/2013-April/010510.html
|
|
They are irrelevant and misleading.
E.g. systemd-analyze:
Startup finished in 6d 4h 15min 32.330s (kernel) + 49ms 914us (userspace) = 6d 4h 15min 32.380s
becomes
Startup finished in 53.735ms (userspace) = 53.735ms
which looks much better :)
|
|
When switching root, i.e. LANG can be set to the locale of the initramfs
or "C", if it was unset. When systemd deserializes LANG in the real root
this would overwrite the setting previously gathered by locale_set().
To reproduce, boot with an initramfs without locale.conf or change
/etc/locale.conf to a different language than the initramfs and check a
daemon started by systemd:
$ tr "$\000" '\n' </proc/$(pidof sshd)/environ | grep LANG
LANG=C
To prevent that, serialization of environment variables is skipped, when
serializing for switching root.
https://bugzilla.redhat.com/show_bug.cgi?id=949525
|
|
Before, we would initialize many fields twice: first
by filling the structure with zeros, and then a second
time with the real values. We can let the compiler do
the job for us, avoiding one copy.
A downside of this patch is that text gets slightly
bigger. This is because all zero() calls are effectively
inlined:
$ size build/.libs/systemd
text data bss dec hex filename
before 897737 107300 2560 1007597 f5fed build/.libs/systemd
after 897873 107300 2560 1007733 f6075 build/.libs/systemd
… actually less than 1‰.
A few asserts that the parameter is not null had to be removed. I
don't think this changes much, because first, it is quite unlikely
for the assert to fail, and second, an immediate SEGV is almost as
good as an assert.
|
|
different umask
|
|
Instead of outputting "5h 55s 50ms 3us" we'll now output "5h
55.050003s". Also, while outputting the accuracy is configurable.
Basically we now try use "dot notation" for all time values > 1min. For
>= 1s we use 's' as unit, otherwise for >= 1ms we use 'ms' as unit, and
finally 'us'.
This should give reasonably values in most cases.
|
|
The ~80 chars per line part wasn't well received.
|
|
Use _cleanup_ and wrap lines to ~80 chars and such.
|
|
All Execs within the service, will get mounted the same
/tmp and /var/tmp directories, if service is configured with
PrivateTmp=yes. Temporary directories are cleaned up by service
itself in addition to systemd-tmpfiles. Directory which is mounted
as inaccessible is created at runtime in /run/systemd.
|
