| Age | Commit message (Collapse) | Author |
|---|
|
define for the max number of rlimits, too
|
|
Let's make the scope of the show-status stuff a bit smaller, and make it
private to the core, rather than shared API in shared/.
|
|
As discussed on the ML these are useful to manage runtime directories
below /run for services.
|
|
This is primarily useful for services that need to track clients which
reference certain objects they maintain, or which explicitly want to
subscribe to certain events. Something like this is done in a large
number of services, and not trivial to do. Hence, let's unify this at
one place.
This also ports over PID 1 to use this to ensure that subscriptions to
job and manager events are correctly tracked. As a side-effect this
makes sure we properly serialize and restore the track list across
daemon reexec/reload, which didn't work correctly before.
This also simplifies how we distribute messages to broadcast to the
direct busses: we only track subscriptions for the API bus and
implicitly assume that all direct busses are subscribed. This should be
a pretty OK simplification since clients connected via direct bus
connections are shortlived anyway.
|
|
BlockIOAccounting= for all units at once
|
|
In some cases it is interesting to map a PID to two units at the same
time. For example, when a user logs in via a getty, which is reexeced to
/sbin/login that binary will be explicitly referenced as main pid of the
getty service, as well as implicitly referenced as part of the session
scope.
|
|
|
|
When set to auto, status will shown when the first ephemeral message
is shown (a job has been running for five seconds). Then until the
boot or shutdown ends, status messages will be shown.
No indication about the switch is done: I think it should be clear
for the user that first the cylon eye and the ephemeral messages appear,
and afterwards messages are displayed.
The initial arming of the event source was still wrong, but now should
really be fixed.
|
|
|
|
when not active
This way, we can avoid executing two /bin/swapon jobs to be dispatched
for the same swap device if it is configured for two different paths.
Previously we were just tracking the device nodes of active swap
devices, which would not allow us to recognize the identity of two swap
devices before they are active.
https://bugs.freedesktop.org/show_bug.cgi?id=69835
|
|
We expect the event on /proc/swaps before we expect the SIGCHILD,
reflect this in the state machine.
|
|
Always read all external events before we decide what we do next.
|
|
This patch converts PID 1 to libsystemd-bus and thus drops the
dependency on libdbus. The only remaining code using libdbus is a test
case that validates our bus marshalling against libdbus' marshalling,
and this dependency can be turned off.
This patch also adds a couple of things to libsystem-bus, that are
necessary to make the port work:
- Synthesizing of "Disconnected" messages when bus connections are
severed.
- Support for attaching multiple vtables for the same interface on the
same path.
This patch also fixes the SetDefaultTarget() and GetDefaultTarget() bus
calls which used an inappropriate signature.
As a side effect we will now generate PropertiesChanged messages which
carry property contents, rather than just invalidation information.
|
|
|
|
"make check-api-unused" informs us about code that is not used anymore
or that is exported but only used internally. Fix these all over the
place.
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=821723
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=71132
Patch adds DefaultTimeoutStartSec, DefaultTimeoutStopSec, DefaultRestartSec
configuration options to manager configuration file.
|
|
Always use our own macros, and name all our own macros the same style.
|
|
Previously to automatically create dependencies between mount units we
matched every mount unit agains all others resulting in O(n^2)
complexity. On setups with large amounts of mount units this might make
things slow.
This change replaces the matching code to use a hashtable that is keyed
by a path prefix, and points to a set of units that require that path to
be around. When a new mount unit is installed it is hence sufficient to
simply look up this set of units via its own file system paths to know
which units to order after itself.
This patch also changes all unit types to only create automatic mount
dependencies via the RequiresMountsFor= logic, and this is exposed to
the outside to make things more transparent.
With this change we still have some O(n) complexities in place when
handling mounts, but that's currently unavoidable due to kernel APIs,
and still substantially better than O(n^2) as before.
https://bugs.freedesktop.org/show_bug.cgi?id=69740
|
|
Stop importing non-sensical kernel-exported variables. All
parameters in the kernel command line are exported to the
initial environment of PID1, but suppressed if they are
recognized by kernel built-in code. The EFI booted kernel
will add further kernel-internal things which do not belong
into userspace.
The passed original environ data of the process is not touched
and preserved across re-execution, to allow external reading of
/proc/self/environ for process properties like container*=.
|
|
Make Type=idle communication bidirectional: when bootup is finished,
the manager, as before, signals idling Type=idle jobs to continue.
However, if the boot takes too long, idling jobs signal the manager
that they have had enough, wait a tiny bit more, and continue, taking
ownership of the console. The manager, when signalled that Type=idle
jobs are done, makes a note and will not write to the console anymore.
This is a cosmetic issue, but quite noticable, so let's just fix it.
Based on Harald Hoyer's patch.
https://bugs.freedesktop.org/show_bug.cgi?id=54247
http://unix.stackexchange.com/questions/51805/systemd-messages-after-starting-login/
|
|
reload/reexec of PID 1
Since we'll unload all units/job during a reload, and then readd them it
is really useful for clients to be aware of this phase hence sent a
signal out before and after. This signal is called "Reloading" (despite
the fact that it is also sent out during reexecution, which we consider
a special case in this context) and has one boolean parameter which is
true for the signal sent before the reload, and false for the signal
after the reload. The UnitRemoved/JobRremoved and UnitNew/JobNew due to
the reloading are guranteed to be between the pair of Reloading
messages.
|
|
|
|
Since we should allow registering/unregistering transient units with the
same name in a tight-loop, we need to make the GC more aggressive, so
that dead units are cleaned up immediately instead of later.
hence, execute the GC sweep on every event loop iteration and clean up
units. This of course, means we need to be careful with adding units to
the GC queue, which we already are since we execute check_gc() of each
unit type already when adding something to the queue.
|
|
Replace the very generic cgroup hookup with a much simpler one. With
this change only the high-level cgroup settings remain, the ability to
set arbitrary cgroup attributes is removed, so is support for adding
units to arbitrary cgroup controllers or setting arbitrary paths for
them (especially paths that are different for the various controllers).
This also introduces a new -.slice root slice, that is the parent of
system.slice and friends. This enables easy admin configuration of
root-level cgrouo properties.
This replaces DeviceDeny= by DevicePolicy=, and implicitly adds in
/dev/null, /dev/zero and friends if DeviceAllow= is used (unless this is
turned off by DevicePolicy=).
|
|
This complements existing functionality of setting variables
through 'systemctl set-environment', the kernel command line,
and through normal environment variables for systemd in session
mode.
|
|
- This changes all logind cgroup objects to use slice objects rather
than fixed croup locations.
- logind can now collect minimal information about running
VMs/containers. As fixed cgroup locations can no longer be used we
need an entity that keeps track of machine cgroups in whatever slice
they might be located. Since logind already keeps track of users,
sessions and seats this is a trivial addition.
- nspawn will now register with logind and pass various bits of metadata
along. A new option "--slice=" has been added to place the container
in a specific slice.
- loginctl gained commands to list, introspect and terminate machines.
- user.slice and machine.slice will now be pulled in by logind.service,
since only logind.service requires this slice.
|
|
This will add another color to the legend called "Loading unit files"
Like the generators it will mark a part of the systemd bar indicating
the time spent while loading unit files.
|
|
|
|
I'm assuming that it's fine if a _const_ or _pure_ function
calls assert. It is assumed that the assert won't trigger,
and even if it does, it can only trigger on the first call
with a given set of parameters, and we don't care if the
compiler moves the order of calls.
|
|
|
|
When a trigger unit wants to know if a stop is queued for it, we should
just check precisely that and do not check whether it is actually
stopped already. This is because we use these checks usually from state
change calls where the state variables are not updated yet.
This change splits unit_pending_inactive() into two calls
unit_inactive_or_pending() and unit_stop_pending(). The former checks
state and pending jobs, the latter only pending jobs.
|
|
When switching root, i.e. LANG can be set to the locale of the initramfs
or "C", if it was unset. When systemd deserializes LANG in the real root
this would overwrite the setting previously gathered by locale_set().
To reproduce, boot with an initramfs without locale.conf or change
/etc/locale.conf to a different language than the initramfs and check a
daemon started by systemd:
$ tr "$\000" '\n' </proc/$(pidof sshd)/environ | grep LANG
LANG=C
To prevent that, serialization of environment variables is skipped, when
serializing for switching root.
https://bugzilla.redhat.com/show_bug.cgi?id=949525
|
|
All Execs within the service, will get mounted the same
/tmp and /var/tmp directories, if service is configured with
PrivateTmp=yes. Temporary directories are cleaned up by service
itself in addition to systemd-tmpfiles. Directory which is mounted
as inaccessible is created at runtime in /run/systemd.
|
|
Sometimes the boot gets stuck until a timeout hits. The usual timeouts
are on the order of minutes, so users may lose patience.
Print animated status messages telling the names of units with running
jobs to make it easy to see what systemd is waiting for.
The animation looks cooler with a shorter interval, but 1 s is OK and
should not be too hard on slow serial console users.
|
|
|
|
Ephemeral status lines do not end with a newline and they expect to be
overwritten by the next printed status line.
|
|
They're not used outside manager.c anymore.
|
|
unit_status_printf() checks the state of the manager, not of the unit
as such. Move it to manager.c and rename it to manager_status_printf().
Temporarily keep unit_status_printf as a wrapper macro.
|
|
|
|
|
|
clock is changed
|
|
|
|
As audit is pretty much just a special kind of logging we should treat
it similar, and manage the audit fd in a static variable.
This simplifies the audit fd sharing with the SELinux access checking
code quite a bit.
|
|
Note: I did s/MANAGER/SYSTEMD/ everywhere, even though it makes the
patch quite verbose. Nevertheless, keeping MANAGER prefix in some
places, and SYSTEMD prefix in others would just lead to confusion down
the road. Better to rip off the band-aid now.
|
|
times
This only adds the fields to the D-Bus interfaces but doesn't fill them
in with anything useful yet. Gummiboot exposes the necessary bits of
information to use however and as soon as I get my fingers on a proper
UEFI laptop I'll hook up the remaining bits.
Since we want to stabilize the D-Bus interface soon and include it in
the stability promise we should get the last fixes in, hence this change
now.
|
|
#pragma once has been "un-deprecated" in gcc since 3.3, and is widely supported
in other compilers.
I've been using and maintaining (rebasing) this patch for a while now, as
it annoyed me to see #ifndef fooblahfoo, etc all over the place,
almost arrogant about the annoyance of having to define all these names to
perform a commen but neccicary functionality, when a completely superior
alternative exists.
I havn't sent it till now, cause its kindof a style change, and it is bad
voodoo to mess with style that has been established by more established
editors. So feel free to lambast me as a crazy bafoon.
v2 - preserve externally used headers
|
|
|
|
This option never made much sense. It was originally intended to make
sure that the usual startup output of sysv scripts goes to the terminal.
However, since SysV scripts started from a terminal would not output to
that terminal, but rather /dev/console this effect was more often than
not actually taking place. Nowadays systemd has much nicer boot time
status output than SysV which makes the sysv output redundant. Finally,
all output of services goes to the journal anyway, and is not lost.
Hence, let's drop this option, and simplify things a bit.
|
|
Previously generated units were always placed at the end of the search
path. With this change there will be three unit dirs instead of one, to
place generated entries at the beginning, in the middle and at the end
of the search path:
beginning: for units that need to override all configuration, regardless
of user or vendor. Example use: system-update-generator uses this to
temporarily redirect default.target.
middle: for units that need to override vendor configuration, but not
vendor configuration. Example use: /etc/fstab should override vendor
supplied configuration (think /tmp), but should not override native user
configuration.
end: does not override anything but is available as well. Possible usage
might be to convert D-Bus bus service files to native units but allowing
vendor supplied native units to win.
|
