| Age | Commit message (Collapse) | Author |
|---|
|
|
|
make virtualization detection quieter, rework unit start limit logic, detect unit file drop-in changes correctly, fix autofs state propagation
|
|
Port the progagation logic to the generic Unit->trigger_notify() callback logic
in the unit vtable, that is called for a unit not only when the triggered unit
of it changes state but also when a job for that unit finishes. This, firstly
allows us to make the code a bit cleaner and more generic, but more
importantly, allows us to notice correctly when a mount job fails, and
propagate that back to autofs client processes.
Fixes: #2181
|
|
Let's move the enforcement of the per-unit start limit from unit.c into the
type-specific files again. For unit types that know a concept of "result" codes
this allows us to hook up the start limit condition to it with an explicit
result code. Also, this makes sure that the state checks in clal like
service_start() may be done before the start limit is checked, as the start
limit really should be checked last, right before everything has been verified
to be in order.
The generic start limit logic is left in unit.c, but the invocation of it is
moved into the per-type files, in the various xyz_start() functions, so that
they may place the check at the right location.
Note that this change drops the enforcement entirely from device, slice, target
and scope units, since these unit types generally may not fail activation, or
may only be activated a single time. This is also documented now.
Note that restores the "start-limit-hit" result code that existed before
6bf0f408e4833152197fb38fb10a9989c89f3a59 already in the service code. However,
it's not introduced for all units that have a result code concept.
Fixes #3166.
|
|
This way it can be used in install.c in subsequent commit.
|
|
This way it can be used in install.c in subsequent commit.
|
|
Always create dependencies for bind mounts
|
|
In case a file is on a networked filesystem, we may tag the fstab record with
_netdev option, however, corrrect dependencies will be created for this mount.
|
|
Dependencies were not created for _netdev mountpoints, the reasoning for this
is in the commit fc676b00, i.e. to avoid adding dependencies for network
mountpoints where What= appears like a path. Thus proposing this semantically
more correct condition when dependencies are added for _actual_ bind mounts
irrespectively of network flag.
Consequently it allows to add _netdev option to bind mounts, which includes
them in remote-fs.target, which simplifies configuration.
|
|
This adds a new GetProcesses() bus call to the Unit object which returns an
array consisting of all PIDs, their process names, as well as their full cgroup
paths. This is then used by "systemctl status" to show the per-unit process
tree.
This has the benefit that the client-side no longer needs to access the
cgroupfs directly to show the process tree of a unit. Instead, it now uses this
new API, which means it also works if -H or -M are used correctly, as the
information from the specific host is used, and not the one from the local
system.
Fixes: #2945
|
|
|
|
Previously, we had two enums ManagerRunningAs and UnitFileScope, that were
mostly identical and converted from one to the other all the time. The latter
had one more value UNIT_FILE_GLOBAL however.
Let's simplify things, and remove ManagerRunningAs and replace it by
UnitFileScope everywhere, thus making the translation unnecessary. Introduce
two new macros MANAGER_IS_SYSTEM() and MANAGER_IS_USER() to simplify checking
if we are running in one or the user context.
|
|
core/mount: Don't unmount initramfs mounts
|
|
at boot
Without this patch applied the mount unit with 'automount' option was still
pulled by local-fs.target and thus was activated during the boot process which
defeats the purpose of the 'automount' option:
$ grep /mnt /etc/fstab
/dev/vdb1 /mnt ext2 defaults,x-systemd.automount 0 0
$ reboot
...
$ mount | grep mnt
systemd-1 on /mnt type autofs (rw,relatime,fd=34,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
/dev/vdb1 on /mnt type ext2 (rw,relatime)
$ systemctl status mnt.mount | grep Active
Active: active (mounted) since Thu 2016-03-03 21:36:22 CET; 42s ago
With the patch applied:
$ reboot
...
$ mount | grep mnt
systemd-1 on /mnt type autofs (rw,relatime,fd=22,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
$ systemctl status mnt.mount | grep Active
Active: inactive (dead)
$ ls /mnt
lost+found
$ systemctl status mnt.mount | grep Active
Active: active (mounted) since Thu 2016-03-03 21:47:32 CET; 4s ago
|
|
A mount within /run/initramfs is indicative that the mount was
created by initramfs init and will be unmounted by initramfs
shutdown.
It is unlikely that such a mount point would even be unmountable
by the the main system, for example in the case of the root file-
system being loop-mounted from a file in a /run/initramfs mount.
|
|
This feature will not be used anytime soon, so remove a bit of cruft.
The BusPolicy= config directive will stay around as compat noop.
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
events correctly
|
|
This clean-ups timeout handling in PID 1. Specifically, instead of storing 0 in internal timeout variables as
indication for a disabled timeout, use USEC_INFINITY which is in-line with how we do this in the rest of our code
(following the logic that 0 means "no", and USEC_INFINITY means "never").
This also replace all usec_t additions with invocations to usec_add(), so that USEC_INFINITY is properly propagated,
and sd-event considers it has indication for turning off the event source.
This also alters the deserialization of the units to restart timeouts from the time they were originally started from.
Before this patch timeouts would be restarted beginning with the time of the deserialization, which could lead to
artificially prolonged timeouts if a daemon reload took place.
Finally, a new RuntimeMaxSec= setting is introduced for service units, that specifies a maximum runtime after which a
specific service is forcibly terminated. This is useful to put time limits on time-intensive processing jobs.
This also simplifies the various xyz_spawn() calls of the various types in that explicit distruction of the timers is
removed, as that is done anyway by the state change handlers, and a state change is always done when the xyz_spawn()
calls fail.
Fixes: #2249
|
|
If a mount unit is bound to a device, systemd tries to umount the
mount point, if it thinks the device has gone away.
Due to the uevent queue and inotify of /proc/self/mountinfo being two
different sources, systemd can never get the ordering reliably correct.
It can happen, that in the uevent queue ADD,REMOVE,ADD is queued
and an inotify of mountinfo (or libmount event) happend with the
device in question.
systemd cannot know, at which point of time the mount happend in the
ADD,REMOVE,ADD sequence.
The real ordering might have been ADD,REMOVE,ADD,mount
and systemd might think ADD,mount,REMOVE,ADD and would umount the
mountpoint.
A test script which triggered this behaviour is:
rm -f test-efi-disk.img
dd if=/dev/null of=test-efi-disk.img bs=1M seek=512 count=1
parted --script test-efi-disk.img \
"mklabel gpt" \
"mkpart ESP fat32 1MiB 511MiB" \
"set 1 boot on"
LOOP=$(losetup --show -f -P test-efi-disk.img)
udevadm settle
mkfs.vfat -F32 ${LOOP}p1
mkdir -p mnt
mount ${LOOP}p1 mnt
... <dostuffwith mnt>
Without the "udevadm settle" systemd unmounted mnt while the script was
operating on mnt.
Of course the question is, why there was a REMOVE in the first place,
but this is not part of this patch.
|
|
Apparently, util-linux' mount command implicitly drops the smack-related
options anyway before passing them to the kernel, if the kernel doesn't
know SMACK, hence there's no point in duplicating this in systemd.
Fixes #1696
|
|
Let's make the code a bit more explicit. Should not change execution
logic in any way.
|
|
callee, not caller
It's nicer to hide the check away in the various
xyz_add_default_dependencies() calls, rather than making it explicit in
the caller, and thus require deeper nesing.
|
|
We cannot handle enumeration failures in a sensible way, hence let's try
hard to continue without making such failures fatal, and log about it
with precise error messages.
|
|
When coldplugging the unit state, make sure to follow the same basic
logic for all unit types: always verify whether the control PID is still
a waitable process before proceeding.
|
|
|
|
|
|
|
|
|
|
We don't need two functions that do essentialy the same, hence drop
path_get_parent(), and stick to dirname_malloc(), but move it to
path-util.[ch].
|
|
|
|
That way it's in sync with the other SMACK label settings.
https://github.com/systemd/systemd/pull/1664#issuecomment-150891270
|
|
string-util.[ch]
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
|
|
This really deserves its own file, given how much code this is now.
|
|
This option specifies the label to assign the root of the file system if
it lacks the Smack extended attribute. Note that this option will be
ignored if kernel does not support the Smack feature by runtime
checking.
|
|
When starting a transient service, allow setting stdin/stdout/stderr fds
for it, by passing them in via the bus.
This also simplifies some of the serialization code for units.
|
|
|
|
The current implementation directly monitor /proc/self/mountinfo and
/run/mount/utab files. It's really not optimal because utab file is
private libmount stuff without any official guaranteed semantic.
The libmount since v2.26 provides API to monitor mount kernel &
userspace changes and since v2.27 the monitor is usable for
non-root users too.
This patch replaces the current implementation with libmount based
solution.
Signed-off-by: Karel Zak <kzak@redhat.com>
|
|
Adds a coccinelle script to port things over automatically.
|
|
This replaces this:
free(p);
p = NULL;
by this:
p = mfree(p);
Change generated using coccinelle. Semantic patch is added to the
sources.
|
|
This adds a new call unit_set_slice(), and simplifies
unit_add_default_slice(). THis should make our code a bit more robust
and simpler.
|
|
Let's add a way to get the type-specific D-Bus interface of a unit from
either its type or name to src/basic/unit-name.[ch]. That way we can
share it with the client side, where it is useful in tools like cgls or
machinectl.
Also ports over machinectl to make use of this.
|
|
It seems that systemd still uses legacy -n option. The option has been
originally designed to avoid write to /etc/mtab during boot when root
FS is not ready or read-only.
This is not necessary for long time, because /etc/mtab is not a real
file (it's symlink) and write to the file is impossible. All utils
should be able to detect the symlink and ignore mtab. This concept is
supported for very long time before systemd.
The userspase mount options are currently maintained by libmount
(mount(8) and mount.nfs) in /run/mount) which is tmpfs initialized
during early boot.
|
|
These units' message format strings are identical to the generic
strings. Since we can always rely on the fallback, these are now
redundant.
|
|
Return 1 from *_reload() methods to signify "we did something", just
like in *_start(). This causes "Reloading foo..." messages to be logged.
"Reloaded foo." messages are already logged.
|
|
Skip /proc/mountinfo entries for which libmount returns a NULL pointer
for 'source' or 'target'. This happened on Semaphore CI's build servers
when the test suite is run.
|
|
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032059.html
|
|
gone from *all* lines
Devices might be referenced by multiple mount points in
/proc/self/mountinfo, hence we should consider them unmounted only after
they disappeared from all lines, not just from one.
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032026.html
|
|
|
|
http://lists.freedesktop.org/archives/systemd-devel/2015-May/031658.html
|
