| Age | Commit message (Collapse) | Author |
|---|
|
This feature will not be used anytime soon, so remove a bit of cruft.
The BusPolicy= config directive will stay around as compat noop.
|
|
Remove some old cruft
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
unit, not just services
This moves the StartLimitBurst=, StartLimitInterval=, StartLimitAction=, RebootArgument= from the [Service] section
into the [Unit] section of unit files, and thus support it in all unit types, not just in services.
This way we can enforce the start limit much earlier, in particular before testing the unit conditions, so that
repeated start-up failure due to failed conditions is also considered for the start limit logic.
For compatibility the four options may also be configured in the [Service] section still, but we only document them in
their new section [Unit].
This also renamed the socket unit failure code "service-failed-permanent" into "service-start-limit-hit" to express
more clearly what it is about, after all it's only triggered through the start limit being hit.
Finally, the code in busname_trigger_notify() and socket_trigger_notify() is altered to become more alike.
Fixes: #2467
|
|
This clean-ups timeout handling in PID 1. Specifically, instead of storing 0 in internal timeout variables as
indication for a disabled timeout, use USEC_INFINITY which is in-line with how we do this in the rest of our code
(following the logic that 0 means "no", and USEC_INFINITY means "never").
This also replace all usec_t additions with invocations to usec_add(), so that USEC_INFINITY is properly propagated,
and sd-event considers it has indication for turning off the event source.
This also alters the deserialization of the units to restart timeouts from the time they were originally started from.
Before this patch timeouts would be restarted beginning with the time of the deserialization, which could lead to
artificially prolonged timeouts if a daemon reload took place.
Finally, a new RuntimeMaxSec= setting is introduced for service units, that specifies a maximum runtime after which a
specific service is forcibly terminated. This is useful to put time limits on time-intensive processing jobs.
This also simplifies the various xyz_spawn() calls of the various types in that explicit distruction of the timers is
removed, as that is done anyway by the state change handlers, and a state change is always done when the xyz_spawn()
calls fail.
Fixes: #2249
|
|
During daemon-reload, PID1 temporarly loses its DBus connection, so there's
a small window in which all signals sent by dbus-daemon are lost.
This is a problem, since we rely on the NameOwnerChanged signals in order to
consider a service with Type=dbus fully started or terminated, respectively.
In order to fix this, a rewrite of bus_list_names() is necessary. We used
to walk the current list of names on the bus, and blindly triggered the
bus_name_owner_change() callback on each service, providing the actual name
as current owner. This implementation has a number of problems:
* We cannot detect if the the name was moved from one owner to the other
while we were reloading
* We don't notify services which missed the name loss signal
* Providing the actual name as current owner is a hack, as the comment also
admits.
To fix this, this patch carries the following changes:
* Track the name of the current bus name owner, and (de-)serialize it
during reload. This way, we can detect changes.
* In bus_list_names(), walk the list of bus names we're interested in
first, and then see if the name is active on the bus. If it is,
check it it's still the same as it used to be, and synthesize
NameOwnerChanged signals for the name add and/or loss.
This should fully synchronize the current name list with the internal
state of all services.
|
|
This is a continuation of the previous include sort patch, which
only sorted for .c files.
|
|
When starting a transient service, allow setting stdin/stdout/stderr fds
for it, by passing them in via the bus.
This also simplifies some of the serialization code for units.
|
|
This adds support for naming file descriptors passed using socket
activation. The names are passed in a new $LISTEN_FDNAMES= environment
variable, that matches the existign $LISTEN_FDS= one and contains a
colon-separated list of names.
This also adds support for naming fds submitted to the per-service fd
store using FDNAME= in the sd_notify() message.
This also adds a new FileDescriptorName= setting for socket unit files
to set the name for fds created by socket units.
This also adds a new call sd_listen_fds_with_names(), that is similar to
sd_listen_fds(), but also returns the names of the fds.
systemd-activate gained the new --fdname= switch to specify a name for
testing socket activation.
This is based on #1247 by Maciej Wereski.
Fixes #1247.
|
|
|
|
By using these parameters functionfs service can specify ffs descriptors
and strings which should be written to ep0.
|
|
|
|
This adds support for showing the accumulated consumed CPU time per-unit
in the "systemctl status" output. The property is also readable via the
bus.
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
With this change it is possible to send file descriptors to PID 1, via
sd_pid_notify_with_fds() which PID 1 will store individually for each
service, and pass via the usual fd passing logic on next invocation.
This is useful for enable daemon reload schemes where daemons serialize
their state to /run, push their fds into PID 1 and terminate, restoring
their state on next start from the data in /run and passed in from PID
1.
The fds are kept by PID 1 as long as no POLLHUP or POLLERR is seen on
them, and the service they belong to are either not dead or failed, or
have a job queued.
|
|
Option was being parsed but not used for anything.
|
|
if sigabrt doesn't do the job, follow regular shutdown
routine, sigterm > sigkill.
|
|
This makes possible to spawn service instances triggered by socket with
MLS/MCS SELinux labels which are created based on information provided by
connected peer.
Implementation of label_get_child_mls_label derived from xinetd.
Reviewed-by: Paul Moore <pmoore@redhat.com>
|
|
If BusPolicy= was passed, the parser function will have created
an ExecContext->bus_endpoint object, along with policy information.
In that case, create a kdbus endpoint, and pass its path name to the
namespace logic, to it will be mounted over the actual 'bus' node.
At endpoint creation time, no policy is updloaded. That is done after
fork(), through a separate call. This is necessary because we don't
know the real uid of the process earlier than that.
|
|
When this system-wide start-up timeout is hit we execute one of the
failure actions already implemented for services that fail.
This should not only be useful on embedded devices, but also on laptops
which have the power-button reachable when the lid is closed. This
devices, when in a backpack might get powered on by accident due to the
easily reachable power button. We want to make sure that the system
turns itself off if it starts up due this after a while.
When the system manages to fully start-up logind will suspend the
machine by default if the lid is closed. However, in some cases we don't
even get as far as logind, and the boot hangs much earlier, for example
because we ask for a LUKS password that nobody ever enters.
Yeah, this is a real-life problem on my Yoga 13, which has one of those
easily accessible power buttons, even if the device is closed.
|
|
and STOPPING=1 sd_notify() messages
|
|
StatusErrno dbus property along StatusText to allow notification of numeric status condition while degraded service operation or any other special situation.
|
|
This does the inverse of RestartPreventExitStatus=: it forces a restart
of a service when a certain exit status is returned by a service
process.
|
|
Parsing sysv files was moved to the sysv-generator in the previous commit.
This patch removes the sysv parsing from serivce.c.
Note that this patch drops the following now unused sysv-specific info
from service dump:
"SysV Init Script has LSB Header: (yes/no)"
"SysVEnabled: (yes/no)"
"SysVRunLevels: (levels)"
|
|
Restart=on-abnormal is similar to Restart=on-failure, but avoids
restarts on unclean exit codes (but still doing restarts on all
obviously unclean exits, such as timeouts, signals, coredumps, watchdog
timeouts).
Also see:
https://fedorahosted.org/fpc/ticket/191
|
|
It's used for the FailureAction property as well.
|
|
It has the same possible values as StartLimitAction= and is executed
immediately if a service fails.
|
|
When rebooting with systemctl, an optional argument can be passed to the
reboot system call. This makes it possible the specify the argument in a
service file and use it when the service triggers a restart.
This is useful to distinguish between manual reboots and reboots caused by
failing services.
|
|
|
|
PrivateTmp= namespaces
|
|
This patch converts PID 1 to libsystemd-bus and thus drops the
dependency on libdbus. The only remaining code using libdbus is a test
case that validates our bus marshalling against libdbus' marshalling,
and this dependency can be turned off.
This patch also adds a couple of things to libsystem-bus, that are
necessary to make the port work:
- Synthesizing of "Disconnected" messages when bus connections are
severed.
- Support for attaching multiple vtables for the same interface on the
same path.
This patch also fixes the SetDefaultTarget() and GetDefaultTarget() bus
calls which used an inappropriate signature.
As a side effect we will now generate PropertiesChanged messages which
carry property contents, rather than just invalidation information.
|
|
We now treat passno as boleans in the generators, and don't need this any more. fsck itself
is able to sequentialize checks on the same local media, so in the common case the ordering
is redundant.
It is still possible to force an order by using .d fragments, in case that is desired.
|
|
Services using the watchdog option might want to be restarted
only if the watchdog triggers.
|
|
Replace the very generic cgroup hookup with a much simpler one. With
this change only the high-level cgroup settings remain, the ability to
set arbitrary cgroup attributes is removed, so is support for adding
units to arbitrary cgroup controllers or setting arbitrary paths for
them (especially paths that are different for the various controllers).
This also introduces a new -.slice root slice, that is the parent of
system.slice and friends. This enables easy admin configuration of
root-level cgrouo properties.
This replaces DeviceDeny= by DevicePolicy=, and implicitly adds in
/dev/null, /dev/zero and friends if DeviceAllow= is used (unless this is
turned off by DevicePolicy=).
|
|
I'm assuming that it's fine if a _const_ or _pure_ function
calls assert. It is assumed that the assert won't trigger,
and even if it does, it can only trigger on the first call
with a given set of parameters, and we don't care if the
compiler moves the order of calls.
|
|
|
|
In some cases, like wrong configuration, restarting after error
does not help, so administrator can specify statuses by RestartPreventExitStatus
which will not cause restart of a service.
Sometimes you have non-standart exit status, so this can be specified
by SuccessfulExitStatus.
|
|
Makes possible to specify separate timeout for start and stop of
the service.
[ Improved the manpage. Coding style fix. -- michich ]
|
|
|
|
#pragma once has been "un-deprecated" in gcc since 3.3, and is widely supported
in other compilers.
I've been using and maintaining (rebasing) this patch for a while now, as
it annoyed me to see #ifndef fooblahfoo, etc all over the place,
almost arrogant about the annoyance of having to define all these names to
perform a commen but neccicary functionality, when a completely superior
alternative exists.
I havn't sent it till now, cause its kindof a style change, and it is bad
voodoo to mess with style that has been established by more established
editors. So feel free to lambast me as a crazy bafoon.
v2 - preserve externally used headers
|
|
Add possibility to specify timeout for oneshot services.
[ https://bugzilla.redhat.com/show_bug.cgi?id=761656
Added minor fixups. -- michich ]
|
|
UnitPath= is also writable via native units and may be used by generators
to clarify from which file a unit is generated. This patch also hooks up
the cryptsetup and fstab generators to set UnitPath= accordingly.
|
|
Type=idle is much like Type=simple, however between the fork() and the
exec() in the child we wait until PID 1 informs us that no jobs are
left.
This is mostly a cosmetic fix to make gettys appear only after all boot
output is finished and complete.
Note that this does not impact the normal job logic as we do not delay
the completion of any jobs. We just delay the invocation of the actual
binary, and only for services that otherwise would be of Type=simple.
|
|
We finally got the OK from all contributors with non-trivial commits to
relicense systemd from GPL2+ to LGPL2.1+.
Some udev bits continue to be GPL2+ for now, but we are looking into
relicensing them too, to allow free copy/paste of all code within
systemd.
The bits that used to be MIT continue to be MIT.
The big benefit of the relicensing is that closed source code may now
link against libsystemd-login.so and friends.
|
|
|
