| Age | Commit message (Collapse) | Author |
|---|
|
As discussed on the ML these are useful to manage runtime directories
below /run for services.
|
|
BlockIOAccounting= for all units at once
|
|
first (or second)
Previously the returned object of constructor functions where sometimes
returned as last, sometimes as first and sometimes as second parameter.
Let's clean this up a bit. Here are the new rules:
1. The object the new object is derived from is put first, if there is any
2. The object we are creating will be returned in the next arguments
3. This is followed by any additional arguments
Rationale:
For functions that operate on an object we always put that object first.
Constructors should probably not be too different in this regard. Also,
if the additional parameters might want to use varargs which suggests to
put them last.
Note that this new scheme only applies to constructor functions, not to
all other functions. We do give a lot of freedom for those.
Note that this commit only changes the order of the new functions we
added, for old ones we accept the wrong order and leave it like that.
|
|
Given that we now have KillMode=mixed where SIGTERM might kill a smaller
set than SIGKILL we need to make sure to always go explicitly throught
the SIGKILL state to get the right end result.
|
|
Things will continue when either the job timeout
or the unit timeout is reached. Add functionality to
access that info.
|
|
|
|
Introduce new call getpeercred() which internally just uses SO_PEERCRED
but checks if the returned data is actually useful due to namespace
quirks.
|
|
Also, introduce a new environment variable named $WATCHDOG_PID which
cotnains the PID of the process that is supposed to send the keep-alive
events. This is similar how $LISTEN_FDS and $LISTEN_PID work together,
and protects against confusing processes further down the process tree
due to inherited environment.
|
|
Since the vtable includes this information anyway, let's just use that
|
|
|
|
|
|
PrivateTmp= namespaces
|
|
This patch converts PID 1 to libsystemd-bus and thus drops the
dependency on libdbus. The only remaining code using libdbus is a test
case that validates our bus marshalling against libdbus' marshalling,
and this dependency can be turned off.
This patch also adds a couple of things to libsystem-bus, that are
necessary to make the port work:
- Synthesizing of "Disconnected" messages when bus connections are
severed.
- Support for attaching multiple vtables for the same interface on the
same path.
This patch also fixes the SetDefaultTarget() and GetDefaultTarget() bus
calls which used an inappropriate signature.
As a side effect we will now generate PropertiesChanged messages which
carry property contents, rather than just invalidation information.
|
|
|
|
|
|
Among other things this makes sure we set SO_REUSEADDR which is
immensely useful.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=71132
Patch adds DefaultTimeoutStartSec, DefaultTimeoutStopSec, DefaultRestartSec
configuration options to manager configuration file.
|
|
each invocation
We can determine the list entry type via the typeof() gcc construct, and
so we should to make the macros much shorter to use.
|
|
|
|
|
|
Always cache the results, and bypass low-level security calls when the
respective subsystem is not enabled.
|
|
Previously to automatically create dependencies between mount units we
matched every mount unit agains all others resulting in O(n^2)
complexity. On setups with large amounts of mount units this might make
things slow.
This change replaces the matching code to use a hashtable that is keyed
by a path prefix, and points to a set of units that require that path to
be around. When a new mount unit is installed it is hence sufficient to
simply look up this set of units via its own file system paths to know
which units to order after itself.
This patch also changes all unit types to only create automatic mount
dependencies via the RequiresMountsFor= logic, and this is exposed to
the outside to make things more transparent.
With this change we still have some O(n) complexities in place when
handling mounts, but that's currently unavoidable due to kernel APIs,
and still substantially better than O(n^2) as before.
https://bugs.freedesktop.org/show_bug.cgi?id=69740
|
|
controllers
Previously we did operations like attach, trim or migrate only on the
controllers that were enabled for a specific unit. With this changes we
will now do them for all supproted controllers, and fall back to all
possible prefix paths if the specified paths do not exist.
This fixes issues if a controller is being disabled for a unit where it
was previously enabled, and makes sure that all processes stay as "far
down" the tree as groups exist.
|
|
Previously the specifier calls could only indicate OOM by returning
NULL. With this change they will return negative errno-style error codes
like everything else.
|
|
|
|
|
|
|
|
Replace the very generic cgroup hookup with a much simpler one. With
this change only the high-level cgroup settings remain, the ability to
set arbitrary cgroup attributes is removed, so is support for adding
units to arbitrary cgroup controllers or setting arbitrary paths for
them (especially paths that are different for the various controllers).
This also introduces a new -.slice root slice, that is the parent of
system.slice and friends. This enables easy admin configuration of
root-level cgrouo properties.
This replaces DeviceDeny= by DevicePolicy=, and implicitly adds in
/dev/null, /dev/zero and friends if DeviceAllow= is used (unless this is
turned off by DevicePolicy=).
|
|
- This changes all logind cgroup objects to use slice objects rather
than fixed croup locations.
- logind can now collect minimal information about running
VMs/containers. As fixed cgroup locations can no longer be used we
need an entity that keeps track of machine cgroups in whatever slice
they might be located. Since logind already keeps track of users,
sessions and seats this is a trivial addition.
- nspawn will now register with logind and pass various bits of metadata
along. A new option "--slice=" has been added to place the container
in a specific slice.
- loginctl gained commands to list, introspect and terminate machines.
- user.slice and machine.slice will now be pulled in by logind.service,
since only logind.service requires this slice.
|
|
In order to prepare for the kernel cgroup rework, let's introduce a new
unit type to systemd, the "slice". Slices can be arranged in a tree and
are useful to partition resources freely and hierarchally by the user.
Each service unit can now be assigned to one of these slices, and later
on login users and machines may too.
Slices translate pretty directly to the cgroup hierarchy, and the
various objects can be assigned to any of the slices in the tree.
|
|
Additionally, compile out rule loading if feature is disabled.
|
|
|
|
I'm assuming that it's fine if a _const_ or _pure_ function
calls assert. It is assumed that the assert won't trigger,
and even if it does, it can only trigger on the first call
with a given set of parameters, and we don't care if the
compiler moves the order of calls.
|
|
When a trigger unit wants to know if a stop is queued for it, we should
just check precisely that and do not check whether it is actually
stopped already. This is because we use these checks usually from state
change calls where the state variables are not updated yet.
This change splits unit_pending_inactive() into two calls
unit_inactive_or_pending() and unit_stop_pending(). The former checks
state and pending jobs, the latter only pending jobs.
|
|
bus_error and bus_error_message_or_strerror dit almost exactly the same,
so use only one of them and place it in dbus-common.
|
|
sockets.socket - Test
Loaded: loaded (/home/alxchk/.config/systemd/user/sockets.socket; static)
Active: inactive (dead)
Listen: Stream: /tmp/stream1
Stream: @stream4
Stream: [::]:9999
Stream: 127.0.0.2:9996
Stream: [::1]:9996
Datagram: /tmp/stream2
Datagram: @stream5
Datagram: [::]:9998
Datagram: 127.0.0.2:9995
Datagram: [::1]:9995
SequentialPacket: @stream6
SequentialPacket: /tmp/stream3
FIFO: /tmp/fifo1
Special: /dev/input/event9
Netlink: kobject-uevent 0
MessageQueue: /msgqueue1
[zj: - minor cleanups,
- free i.listen,
- remove sorting, because the order or sockets matters.]
|
|
When showing an error like 'Socket service not loaded', the
error won't show up in the status for the socket, unless it is
marked as SYSTEMD_UNIT=*.socket. Marking it as SYSTEMD_UNIT=*.service,
when the service is non-existent, is not useful.
|
|
into for boot
|
|
All Execs within the service, will get mounted the same
/tmp and /var/tmp directories, if service is configured with
PrivateTmp=yes. Temporary directories are cleaned up by service
itself in addition to systemd-tmpfiles. Directory which is mounted
as inaccessible is created at runtime in /run/systemd.
|
|
There are very few differences in the implementations of the kill method in the
unit types that have one. Let's unify them.
This does not yet unify unit_kill() with unit_kill_context().
|
|
|
|
|
|
resetting the lists
https://bugzilla.redhat.com/show_bug.cgi?id=756787
|
|
/sys/subsystem/net/devices/lo is never considered active, so sockets
with BindToDevice=lo would never be activated.
|
|
|
|
|
|
|
|
Hello list,
some socket activated service gave me the error message you can see on
the subject, maybe systemd should be more verbose in that case.
Thanks,
Dimitris
|
|
|
|
This adds #ifdef HAVE_ATTR_XATTR_H guards around all usage of xattr.
This unbreaks building with --disable-xattr when <attr/xattr.h> doesn't exist.
<attr/xattr.h> and usage of fsetxattr() without
|
