| Age | Commit message (Collapse) | Author |
|---|
|
|
|
It's primarily just a property of the Manager object after all, and we
try to refer to PID 1 as "manager" instead of "systemd", hence let's to
stick to this here too.
|
|
This changes log_unit_info() (and friends) to take a real Unit* object
insted of just a unit name as parameter. The call will now prefix all
logged messages with the unit name, thus allowing the unit name to be
dropped from the various passed romat strings, simplifying invocations
drastically, and unifying log output across messages. Also, UNIT= vs.
USER_UNIT= is now derived from the Manager object attached to the Unit
object, instead of getpid(). This has the benefit of correcting the
field for --test runs.
Also contains a couple of other logging improvements:
- Drops a couple of strerror() invocations in favour of using %m.
- Not only .mount units now warn if a symlinks exist for the mount
point already, .automount units do that too, now.
- A few invocations of log_struct() that didn't actually pass any
additional structured data have been replaced by simpler invocations
of log_unit_info() and friends.
- For structured data a new LOG_UNIT_MESSAGE() macro has been added,
that works like LOG_MESSAGE() but prefixes the message with the unit
name. Similar, there's now LOG_LINK_MESSAGE() and
LOG_NETDEV_MESSAGE().
- For structured data new LOG_UNIT_ID(), LOG_LINK_INTERFACE(),
LOG_NETDEV_INTERFACE() macros have been added that generate the
necessary per object fields. The old log_unit_struct() call has been
removed in favour of these new macros used in raw log_struct()
invocations. In addition to removing one more function call this
allows generated structured log messages that contain two object
fields, as necessary for example for network interfaces that are
joined into another network interface, and whose messages shall be
indexed by both.
- The LOG_ERRNO() macro has been removed, in favour of
log_struct_errno(). The latter has the benefit of ensuring that %m in
format strings is properly resolved to the specified error number.
- A number of logging messages have been converted to use
log_unit_info() instead of log_info()
- The client code in sysv-generator no longer #includes core code from
src/core/.
- log_unit_full_errno() has been removed, log_unit_full() instead takes
an errno now, too.
- log_unit_info(), log_link_info(), log_netdev_info() and friends, now
avoid double evaluation of their parameters
|
|
|
|
This reverts commit 6e392c9c45643d106673c6643ac8bf4e65da13c1.
We really shouldn't invent external state keeping hashmaps, if we can
keep this state in the units themselves.
|
|
Because the order of coldplugging is not defined, we can reference a
not-yet-coldplugged unit and read its state while it has not yet been
set to a meaningful value.
This way, already active units may get started again.
We fix this by deferring such actions until all units have been at
least somehow coldplugged.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=88401
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
changing unit state
Unit _start() and _stop() implementations can fail with -EAGAIN to delay
execution temporarily. Thus, we should not output status messages before
invoking these calls, but after, and only when we know that the
invocation actually made a change.
|
|
|
|
|
|
|
|
|
|
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_unit_(debug|info|notice|warning|error|emergency)\(([^"]+), "(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_unit_\1_errno(\2, \5, "\3%m"\4);/'
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
|
- Rename log_meta() → log_internal(), to follow naming scheme of most
other log functions that are usually invoked through macros, but never
directly.
- Rename log_info_object() to log_object_info(), simply because the
object should be before any other parameters, to follow OO-style
programming style.
|
|
A timer configured with OnActiveSec will start its associated unit again
if the timer is stopped, then started. However, if the timer unit is
restarted -- with "systemctl restart", say -- this does not occur.
This commit ensures that TIMER_ACTIVE timers are re-enabled whenever the
timer is started, even if that's within a restart job.
|
|
systemctl would print 'CPUQuotaPerSecUSec=(null)' for no limit. This
does not look right.
Since USEC_INFINITY is one of the valid values, format_timespan()
could return NULL, and we should wrap every use of it in strna() or
similar. But most callers didn't do that, and it seems more robust to
return a string ("infinity") that makes sense most of the time, even
if in some places the result will not be grammatically correct.
|
|
Avoids triggering timers prematurely on systems with significantly inaccurate
clocks, or some embedded platforms that lack one entirely.
|
|
|
|
The stamp file for systemd --user timers was named stamp-foo.timer if
XDG_DATA_HOME was unset, but foo.timer otherwise.
|
|
|
|
If a persistent timer has no stamp file yet, it behaves just like a normal
timer until it runs for the first time. If the system is always shut down
while the timer is supposed to run, a stamp file is never created and
Peristent=true has no effect.
This patch fixes this by creating a stamp file with the current time
when the timer is first started.
|
|
|
|
|
|
CLOCK_BOOTTIME_ALARM, too
|
|
|
|
first (or second)
Previously the returned object of constructor functions where sometimes
returned as last, sometimes as first and sometimes as second parameter.
Let's clean this up a bit. Here are the new rules:
1. The object the new object is derived from is put first, if there is any
2. The object we are creating will be returned in the next arguments
3. This is followed by any additional arguments
Rationale:
For functions that operate on an object we always put that object first.
Constructors should probably not be too different in this regard. Also,
if the additional parameters might want to use varargs which suggests to
put them last.
Note that this new scheme only applies to constructor functions, not to
all other functions. We do give a lot of freedom for those.
Note that this commit only changes the order of the new functions we
added, for old ones we accept the wrong order and leave it like that.
|
|
Since the vtable includes this information anyway, let's just use that
|
|
And make it default to 1min
|
|
This patch converts PID 1 to libsystemd-bus and thus drops the
dependency on libdbus. The only remaining code using libdbus is a test
case that validates our bus marshalling against libdbus' marshalling,
and this dependency can be turned off.
This patch also adds a couple of things to libsystem-bus, that are
necessary to make the port work:
- Synthesizing of "Disconnected" messages when bus connections are
severed.
- Support for attaching multiple vtables for the same interface on the
same path.
This patch also fixes the SetDefaultTarget() and GetDefaultTarget() bus
calls which used an inappropriate signature.
As a side effect we will now generate PropertiesChanged messages which
carry property contents, rather than just invalidation information.
|
|
each invocation
We can determine the list entry type via the typeof() gcc construct, and
so we should to make the macros much shorter to use.
|
|
I'm assuming that it's fine if a _const_ or _pure_ function
calls assert. It is assumed that the assert won't trigger,
and even if it does, it can only trigger on the first call
with a given set of parameters, and we don't care if the
compiler moves the order of calls.
|
|
When a trigger unit wants to know if a stop is queued for it, we should
just check precisely that and do not check whether it is actually
stopped already. This is because we use these checks usually from state
change calls where the state variables are not updated yet.
This change splits unit_pending_inactive() into two calls
unit_inactive_or_pending() and unit_stop_pending(). The former checks
state and pending jobs, the latter only pending jobs.
|
|
of their conditions fails
|
|
Instead of having explicit type-specific callbacks that inform the
triggering unit when a triggered unit changes state, make this generic
so that state changes are forwarded betwee any triggered and triggering
unit.
Also, get rid of UnitRef references from automount, timer, path units,
to the units they trigger and rely exclsuively on UNIT_TRIGGER type
dendencies.
|
|
bus_error and bus_error_message_or_strerror dit almost exactly the same,
so use only one of them and place it in dbus-common.
|
|
Instead of outputting "5h 55s 50ms 3us" we'll now output "5h
55.050003s". Also, while outputting the accuracy is configurable.
Basically we now try use "dot notation" for all time values > 1min. For
>= 1s we use 's' as unit, otherwise for >= 1ms we use 'ms' as unit, and
finally 'us'.
This should give reasonably values in most cases.
|
|
into for boot
|
|
The manager already prints "Time has been changed" at level info. It
seems too verbose to print the time change message additionally for
every waiting timer unit.
Downgrade the per-unit message to debug.
|
|
|
|
resetting the lists
https://bugzilla.redhat.com/show_bug.cgi?id=756787
|
|
As it turns out the bus properties for timer units wre really broken,
so let's clean this up for good and properly add calendar timer
serialization. We really should get that right before finalizing the
bus API documentation in the wiki...
|
|
|
|
clock is changed
|
|
|
|
Note: I did s/MANAGER/SYSTEMD/ everywhere, even though it makes the
patch quite verbose. Nevertheless, keeping MANAGER prefix in some
places, and SYSTEMD prefix in others would just lead to confusion down
the road. Better to rip off the band-aid now.
|
|
times
This only adds the fields to the D-Bus interfaces but doesn't fill them
in with anything useful yet. Gummiboot exposes the necessary bits of
information to use however and as soon as I get my fingers on a proper
UEFI laptop I'll hook up the remaining bits.
Since we want to stabilize the D-Bus interface soon and include it in
the stability promise we should get the last fixes in, hence this change
now.
|
|
|
|
We finally got the OK from all contributors with non-trivial commits to
relicense systemd from GPL2+ to LGPL2.1+.
Some udev bits continue to be GPL2+ for now, but we are looking into
relicensing them too, to allow free copy/paste of all code within
systemd.
The bits that used to be MIT continue to be MIT.
The big benefit of the relicensing is that closed source code may now
link against libsystemd-login.so and friends.
|
