Age | Commit message (Collapse) | Author |
|
No distro ships that old systemd versions anyway, hence let's drop
support for live-upgrades for them. Offline updates are still supported.
And live-upgrades will only lose the job queue, hence basically still
work...
|
|
This extends on bea355dac94e82697aa98e25d80ee4248263bf92, and extends
the ratelimiter to not only be used for StopWhenUnneeded=1 units but
also for units that have BindsTo= on a unit that is dead.
http://lists.freedesktop.org/archives/systemd-devel/2015-April/030224.html
|
|
Otherwise we might end up in an endless stop loop.
http://lists.freedesktop.org/archives/systemd-devel/2015-April/030224.html
|
|
Fixes a regression introduced in be7d9ff730cb88d7c6a869dd5c47754c78ceaef2.
|
|
This allows us to ensure that Requisite= dependencies never cause
propagation between units, while Requires= dependencies might.
http://lists.freedesktop.org/archives/systemd-devel/2015-May/031742.html
|
|
It's primarily just a property of the Manager object after all, and we
try to refer to PID 1 as "manager" instead of "systemd", hence let's to
stick to this here too.
|
|
The call is only used by the mount and automount unit types, but that's
already enough to consider it generic unit functionality, hence move it
out of mount.c and into unit.c.
|
|
This changes log_unit_info() (and friends) to take a real Unit* object
insted of just a unit name as parameter. The call will now prefix all
logged messages with the unit name, thus allowing the unit name to be
dropped from the various passed romat strings, simplifying invocations
drastically, and unifying log output across messages. Also, UNIT= vs.
USER_UNIT= is now derived from the Manager object attached to the Unit
object, instead of getpid(). This has the benefit of correcting the
field for --test runs.
Also contains a couple of other logging improvements:
- Drops a couple of strerror() invocations in favour of using %m.
- Not only .mount units now warn if a symlinks exist for the mount
point already, .automount units do that too, now.
- A few invocations of log_struct() that didn't actually pass any
additional structured data have been replaced by simpler invocations
of log_unit_info() and friends.
- For structured data a new LOG_UNIT_MESSAGE() macro has been added,
that works like LOG_MESSAGE() but prefixes the message with the unit
name. Similar, there's now LOG_LINK_MESSAGE() and
LOG_NETDEV_MESSAGE().
- For structured data new LOG_UNIT_ID(), LOG_LINK_INTERFACE(),
LOG_NETDEV_INTERFACE() macros have been added that generate the
necessary per object fields. The old log_unit_struct() call has been
removed in favour of these new macros used in raw log_struct()
invocations. In addition to removing one more function call this
allows generated structured log messages that contain two object
fields, as necessary for example for network interfaces that are
joined into another network interface, and whose messages shall be
indexed by both.
- The LOG_ERRNO() macro has been removed, in favour of
log_struct_errno(). The latter has the benefit of ensuring that %m in
format strings is properly resolved to the specified error number.
- A number of logging messages have been converted to use
log_unit_info() instead of log_info()
- The client code in sysv-generator no longer #includes core code from
src/core/.
- log_unit_full_errno() has been removed, log_unit_full() instead takes
an errno now, too.
- log_unit_info(), log_link_info(), log_netdev_info() and friends, now
avoid double evaluation of their parameters
|
|
A variety of changes:
- Make sure all our calls distuingish OOM from other errors if OOM is
not the only error possible.
- Be much stricter when parsing escaped paths, do not accept trailing or
leading escaped slashes.
- Change unit validation to take a bit mask for allowing plain names,
instance names or template names or an combination thereof.
- Refuse manipulating invalid unit name
|
|
Introduce a new call unit_type_supported() and make use of it
everywhere.
Also, drop Manager parameter from per-type supported method prototype.
|
|
src/core/unit.c: In function 'unit_coldplug':
src/core/unit.c:2884:18: warning: unused variable 'i' [-Wunused-variable]
Iterator i;
^
src/core/unit.c:2883:15: warning: unused variable 'other' [-Wunused-variable]
Unit *other;
^
|
|
This is yet another attempt to fix coldplugging order (more especially,
the problem which happens when one creates a job during coldplugging and
it references a not-yet-coldplugged unit).
Now we forcibly coldplug all units which participate in jobs. This
is a superset of previously implemented handling of the UNIT_TRIGGERS
dependencies, so that handling is removed.
http://lists.freedesktop.org/archives/systemd-devel/2015-April/031212.html
https://bugs.freedesktop.org/show_bug.cgi?id=88401 (once again)
|
|
|
|
http://lists.freedesktop.org/archives/systemd-devel/2015-April/031187.html
|
|
Let's make sure that we don't enqueue triggering jobs for units before
those units are actually fully loaded.
http://lists.freedesktop.org/archives/systemd-devel/2015-April/031176.html
https://bugs.freedesktop.org/show_bug.cgi?id=88401
|
|
This reverts commit 6e392c9c45643d106673c6643ac8bf4e65da13c1.
We really shouldn't invent external state keeping hashmaps, if we can
keep this state in the units themselves.
|
|
|
|
The key was parsed properly, but the warning was still generated.
|
|
|
|
|
|
When the value is already there it returns 0.
Also add a test to ensure this
|
|
Replace ENOTSUP by EOPNOTSUPP as this is what linux actually uses.
|
|
Because the order of coldplugging is not defined, we can reference a
not-yet-coldplugged unit and read its state while it has not yet been
set to a meaningful value.
This way, already active units may get started again.
We fix this by deferring such actions until all units have been at
least somehow coldplugged.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=88401
|
|
This adds support for showing the accumulated consumed CPU time per-unit
in the "systemctl status" output. The property is also readable via the
bus.
|
|
This change introduces a new state "tentative" for device units. Device
units are considered "plugged" when udev announced them, "dead" when
they are not available in the kernel, and "tentative" when they are
referenced in /proc/self/mountinfo or /proc/swaps but not (yet)
announced via udev.
This should fix a race when device nodes (like loop devices) are created
and immediately mounted. Previously, systemd might end up seeing the
mount unit before the device, and would thus pull down the mount because
its BindTo dependency on the device would not be fulfilled.
|
|
By notifying the clients when this property is changed it's possible to
allow "system health monitor" tools to get transitions like
running<->degraded. This is an alternative to send changes on the
SystemState property since the latter is more difficult to derive.
|
|
I'm trying to track down a relatively recent change in systemd
which broke OSTree; see https://bugzilla.gnome.org/show_bug.cgi?id=743891
Systemd started to stop sysroot.mount, and this patch should help
me debug why at least.
While we're here, "break" on the first unit we find that will
deactivate, as there's no point in further iteration.
|
|
When running in user mode unmounting of mount units when a device
vanishes is unlikely to work, and even if it would work is already done
by PID 1 anyway. HEnce, when creating implicit dependencies between
mount units and their backing devices, created a Wants= type dependency
in --user mode, but leave a BindsTo= dependency in --system mode.
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
include-what-you-use automatically does this and it makes finding
unnecessary harder to spot. The only content of poll.h is a include
of sys/poll.h so should be harmless.
|
|
Otherwise we cannot even invoke systemd-exit.service anymore, thus not
even exit.
https://bugs.freedesktop.org/show_bug.cgi?id=83100
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=759320
|
|
The log message talks specifically about services, though it actually
applies to any kind of unit.
|
|
After all it is now much more like strjoin() than strappend(). At the
same time, add support for NULL sentinels, even if they are normally not
necessary.
|
|
If we scale our buffer to be wide enough for the format string, we
should expect that the calculation was correct.
char_array_0() invocations are removed, since snprintf nul-terminates
the output in any case.
A similar wrapper is used for strftime calls, but only in timedatectl.c.
|
|
changing unit state
Unit _start() and _stop() implementations can fail with -EAGAIN to delay
execution temporarily. Thus, we should not output status messages before
invoking these calls, but after, and only when we know that the
invocation actually made a change.
|
|
With this change it is possible to send file descriptors to PID 1, via
sd_pid_notify_with_fds() which PID 1 will store individually for each
service, and pass via the usual fd passing logic on next invocation.
This is useful for enable daemon reload schemes where daemons serialize
their state to /run, push their fds into PID 1 and terminate, restoring
their state on next start from the data in /run and passed in from PID
1.
The fds are kept by PID 1 as long as no POLLHUP or POLLERR is seen on
them, and the service they belong to are either not dead or failed, or
have a job queued.
|
|
Let's unify the code that counts the running jobs a bit, in order to
make sure we are less likely to miss one.
This is related to this bug:
https://bugs.freedesktop.org/show_bug.cgi?id=87349
However, it probably won't fix it fully, and I cannot reproduce the issue.
The change also adds an explicit assert change when the counter is off.
|
|
https://github.com/vlajos/misspell_fixer
https://github.com/torstehu/systemd/commit/b6fdeb618cf2f3ce1645b3315f15f482710c7ffa
Thanks to Torstein Husebo <torstein@huseboe.net>.
|
|
No functional change. This is in preparation for using this in
systemctl in the future.
|
|
Containers do not really support .device, .automount or .swap units;
Systems compiled without support for swap do not support .swap units;
Systems without kdbus do not support .busname units.
With this change attempts to start a unsupported unit types will result
in an immediate "unsupported" job result, which is a lot more
descriptive then before. Also, attempts to start device units in
containers will now immediately fail instead of causing jobs to be
enqueued that never go away.
|
|
src/libsystemd/sd-bus/bus-common-errors.h
Stuff in src/shared/ should not use stuff from src/libsystemd/ really.
|
|
If a unit is set property by "systemctl set-property", a new dropin
file is generated. But the unit's dropin_paths and dropin_mtime are
not updated. So the unit is shown as need daemon reload.
Update unit dropin_paths and dropin_mtime also when dropin file is
written.
|
|
it's not quite as destructive as it sounds nowadays
|
|
|
|
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_unit_(debug|info|notice|warning|error|emergency)\(([^"]+), "(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_unit_\1_errno(\2, \5, "\3%m"\4);/'
|
|
Also, while we are at it, introduce some syntactic sugar for creating
ERRNO= and MESSAGE= structured logging fields.
|
|
- Rename log_meta() → log_internal(), to follow naming scheme of most
other log functions that are usually invoked through macros, but never
directly.
- Rename log_info_object() to log_object_info(), simply because the
object should be before any other parameters, to follow OO-style
programming style.
|
|
That way only one file with condition code remaining, in src/shared/,
rather than src/core/.
Next step: dropping the "-util" suffix from condition-util.[ch].
|
|
fatal for a start job if not met
|
|
I tried to preserve most errno values, but in some cases they were
inconsistent (different errno values for the same error name) or just
mismatched.
|