Age | Commit message (Collapse) | Author |
|
The system state knows the states starting →
running/degraded/maintenance → stopping, where:
starting = system startup
running = normal operation
degraded = at least one unit is currently in failed state
maintenance = rescue/emergency mode is active or queued
stopping = system shutdown
|
|
Bring some arrays that are used for DEFINE_STRING_TABLE_LOOKUP() in the
same order than the enums they reference.
Also, pass the corresponding _MAX value to the array initalizer where
appropriate.
|
|
|
|
define for the max number of rlimits, too
|
|
This mirrors set_consume and makes the common use a bit nicer.
|
|
This is primarily useful for services that need to track clients which
reference certain objects they maintain, or which explicitly want to
subscribe to certain events. Something like this is done in a large
number of services, and not trivial to do. Hence, let's unify this at
one place.
This also ports over PID 1 to use this to ensure that subscriptions to
job and manager events are correctly tracked. As a side-effect this
makes sure we properly serialize and restore the track list across
daemon reexec/reload, which didn't work correctly before.
This also simplifies how we distribute messages to broadcast to the
direct busses: we only track subscriptions for the API bus and
implicitly assume that all direct busses are subscribed. This should be
a pretty OK simplification since clients connected via direct bus
connections are shortlived anyway.
|
|
|
|
BlockIOAccounting= for all units at once
|
|
|
|
|
|
For units without any dependencies, r needs to be initialized to 0.
Otherwise, the return value of unit_add_target_dependencies() is
unspecified.
|
|
|
|
|
|
|
|
Previously a cgroup setting down tree would result in cgroup membership
additions being propagated up the tree and to the siblings, however a
unit could never lose cgroup memberships again. With this change we'll
make sure that both cgroup additions and removals propagate properly.
|
|
during their start job
https://bugzilla.redhat.com/show_bug.cgi?id=997031
|
|
running empty since systemd will get exactly zero notifications about it
|
|
In some cases it is interesting to map a PID to two units at the same
time. For example, when a user logs in via a getty, which is reexeced to
/sbin/login that binary will be explicitly referenced as main pid of the
getty service, as well as implicitly referenced as part of the session
scope.
|
|
|
|
reliable cgroup empty notifier
When a process dies that we can associate with a specific unit, start
watching all other processes of that unit, so that we can associate
those processes with the unit too.
Also, for service units start doing this as soon as we get the first
SIGCHLD for either control or main process, so that we can follow the
processes of the service from one to the other, as long as process that
remain are processes of the ones we watched that died and got reassigned
to us as parent.
Similar, for scope units start doing this as soon as the scope
controller abandons the unit, and thus management entirely reverts to
systemd. To abandon a unit introduce a new Abandon() scope unit method
call.
|
|
|
|
on the host either
Since the current kernel cgroup notification logic is easily confused by
existing subgroups, let's do the same thing as in containers before. and
just not wait for non-control and non-main processes.
This should be corrected as soon as we have sane cgroup notifications
from the kernel.
|
|
never come
|
|
|
|
process, but SIGKILL to all daemon processes
This should fix some race with terminating systemd --user, where the
system systemd instance might race against the user systemd instance
when sending SIGTERM.
|
|
We know that launching a unit will fail if some required directories
haven't been mounted yet. There's no point in starting it just to
have it fail even before it gets a chance to run.
|
|
Just a microopt.
|
|
Suggested-by: Russ Allbery <rra@debian.org>
|
|
Clang is a bit more strict wrt format-nonliterals:
http://clang.llvm.org/docs/LanguageExtensions.html#format-string-checking
Adding these extra printf attributes also makes gcc able to find more
problems. E.g. this patch uncovers a format issue in udev-builtin-path_id.c
Some parts looked intetional about breaking the format-nonliteral check.
I added some supression for warnings there.
|
|
The only problem is that libgen.h #defines basename to point to it's
own broken implementation instead of the GNU one. This can be fixed
by #undefining basename.
|
|
systemctl reload "suceeded" on stopped units, but it is documented
to fail in this case.
https://bugzilla.redhat.com/show_bug.cgi?id=1036845
|
|
|
|
|
|
PrivateTmp= namespaces
|
|
setting and make use of it where applicable
|
|
|
|
|
|
This patch converts PID 1 to libsystemd-bus and thus drops the
dependency on libdbus. The only remaining code using libdbus is a test
case that validates our bus marshalling against libdbus' marshalling,
and this dependency can be turned off.
This patch also adds a couple of things to libsystem-bus, that are
necessary to make the port work:
- Synthesizing of "Disconnected" messages when bus connections are
severed.
- Support for attaching multiple vtables for the same interface on the
same path.
This patch also fixes the SetDefaultTarget() and GetDefaultTarget() bus
calls which used an inappropriate signature.
As a side effect we will now generate PropertiesChanged messages which
carry property contents, rather than just invalidation information.
|
|
When a service exits succesfully and has RemainAfterExit set, its hold
on the console (in m->n_on_console) wasn't released since the unit state
didn't change.
|
|
|
|
If there are no more jobs on console, no need/we shouldn't disable output.
|
|
"make check-api-unused" informs us about code that is not used anymore
or that is exported but only used internally. Fix these all over the
place.
|
|
each invocation
We can determine the list entry type via the typeof() gcc construct, and
so we should to make the macros much shorter to use.
|
|
If the function failed, nothing serious would happen
because unlink would probably return EFAULT, but this
would obscure the real error and is a bit sloppy.
|
|
Previously to automatically create dependencies between mount units we
matched every mount unit agains all others resulting in O(n^2)
complexity. On setups with large amounts of mount units this might make
things slow.
This change replaces the matching code to use a hashtable that is keyed
by a path prefix, and points to a set of units that require that path to
be around. When a new mount unit is installed it is hence sufficient to
simply look up this set of units via its own file system paths to know
which units to order after itself.
This patch also changes all unit types to only create automatic mount
dependencies via the RequiresMountsFor= logic, and this is exposed to
the outside to make things more transparent.
With this change we still have some O(n) complexities in place when
handling mounts, but that's currently unavoidable due to kernel APIs,
and still substantially better than O(n^2) as before.
https://bugs.freedesktop.org/show_bug.cgi?id=69740
|
|
This prevents corruption of the hashmap, because we would free() the
keys in the hashmap, if the unit is already in there, with the same
cgroup path.
|
|
|
|
This is useful to fake session ends for processes like shells.
|
|
$ systemctl --user status hoohoo
hoohoo.service
Loaded: loaded (/home/zbyszek/.config/systemd/user/hoohoo.service; static)
Active: inactive (dead)
start condition failed at Tue 2013-06-25 18:08:42 EDT; 1s ago
ConditionPathExists=/tmp/hoo was not met
Full information is exported over D-Bus:
[(condition, trigger, negate, param, state),...]
where state is one of "failed" (<0), "untested" (0), "OK" (>0).
I've decided to use 0 for "untested", because it might be useful to
differentiate different types of failure later on, without breaking
compatibility.
systemctl shows the failing condition, if there was a non-trigger
failing condition, or says "none of the trigger conditions were met",
because there're often many trigger conditions, and they must all
fail for the condition to fail, so printing them all would consume
a lot of space, and bring unnecessary attention to something that is
quite low-level.
|
|
ConditionPathExists=/tmp/nosuchpath failed for nosuchpath.service.
|