| Age | Commit message (Collapse) | Author |
|---|
|
"make check-api-unused" informs us about code that is not used anymore
or that is exported but only used internally. Fix these all over the
place.
|
|
Always use our own macros, and name all our own macros the same style.
|
|
Previously to automatically create dependencies between mount units we
matched every mount unit agains all others resulting in O(n^2)
complexity. On setups with large amounts of mount units this might make
things slow.
This change replaces the matching code to use a hashtable that is keyed
by a path prefix, and points to a set of units that require that path to
be around. When a new mount unit is installed it is hence sufficient to
simply look up this set of units via its own file system paths to know
which units to order after itself.
This patch also changes all unit types to only create automatic mount
dependencies via the RequiresMountsFor= logic, and this is exposed to
the outside to make things more transparent.
With this change we still have some O(n) complexities in place when
handling mounts, but that's currently unavoidable due to kernel APIs,
and still substantially better than O(n^2) as before.
https://bugs.freedesktop.org/show_bug.cgi?id=69740
|
|
let's make use of some format string magic!
|
|
"Scope" units are very much like service units, however with the
difference that they are created from pre-existing processes, rather
than processes that systemd itself forks off. This means they are
generated programmatically via the bus API as transient units rather
than from static configuration read from disk. Also, they do not provide
execution-time parameters, as at the time systemd adds the processes to
the scope unit they already exist and the parameters cannot be applied
anymore.
The primary benefit of this new unit type is to create arbitrary cgroups
for worker-processes forked off an existing service.
This commit also adds a a new mode to "systemd-run" to run the specified
processes in a scope rather then a transient service.
|
|
Transient units can be created via the bus API. They are configured via
the method call parameters rather than on-disk files. They are subject
to normal GC. Transient units currently may only be created for
services (however, we will extend this), and currently only ExecStart=
and the cgroup parameters can be configured (also to be extended).
Transient units require a unique name, that previously had no
configuration file on disk.
A tool systemd-run is added that makes use of this functionality to run
arbitrary command lines as transient services:
$ systemd-run /bin/ping www.heise.de
Will cause systemd to create a new transient service and run ping in it.
|
|
|
|
and hook some cgroup attributes up to it
This introduces two bus calls to make runtime changes to selected bus
properties, optionally with persistence.
This currently hooks this up only for three cgroup atributes, but this
brings the infrastructure to add more changable attributes.
This allows setting multiple attributes at once, and takes an array
rather than a dictionary of properties, in order to implement simple
resetting of lists using the same approach as when they are sourced from
unit files. This means, that list properties are appended to by this
call, unless they are first reset via assigning the empty list.
|
|
Replace the very generic cgroup hookup with a much simpler one. With
this change only the high-level cgroup settings remain, the ability to
set arbitrary cgroup attributes is removed, so is support for adding
units to arbitrary cgroup controllers or setting arbitrary paths for
them (especially paths that are different for the various controllers).
This also introduces a new -.slice root slice, that is the parent of
system.slice and friends. This enables easy admin configuration of
root-level cgrouo properties.
This replaces DeviceDeny= by DevicePolicy=, and implicitly adds in
/dev/null, /dev/zero and friends if DeviceAllow= is used (unless this is
turned off by DevicePolicy=).
|
|
- This changes all logind cgroup objects to use slice objects rather
than fixed croup locations.
- logind can now collect minimal information about running
VMs/containers. As fixed cgroup locations can no longer be used we
need an entity that keeps track of machine cgroups in whatever slice
they might be located. Since logind already keeps track of users,
sessions and seats this is a trivial addition.
- nspawn will now register with logind and pass various bits of metadata
along. A new option "--slice=" has been added to place the container
in a specific slice.
- loginctl gained commands to list, introspect and terminate machines.
- user.slice and machine.slice will now be pulled in by logind.service,
since only logind.service requires this slice.
|
|
In order to prepare for the kernel cgroup rework, let's introduce a new
unit type to systemd, the "slice". Slices can be arranged in a tree and
are useful to partition resources freely and hierarchally by the user.
Each service unit can now be assigned to one of these slices, and later
on login users and machines may too.
Slices translate pretty directly to the cgroup hierarchy, and the
various objects can be assigned to any of the slices in the tree.
|
|
I'm assuming that it's fine if a _const_ or _pure_ function
calls assert. It is assumed that the assert won't trigger,
and even if it does, it can only trigger on the first call
with a given set of parameters, and we don't care if the
compiler moves the order of calls.
|
|
|
|
When a trigger unit wants to know if a stop is queued for it, we should
just check precisely that and do not check whether it is actually
stopped already. This is because we use these checks usually from state
change calls where the state variables are not updated yet.
This change splits unit_pending_inactive() into two calls
unit_inactive_or_pending() and unit_stop_pending(). The former checks
state and pending jobs, the latter only pending jobs.
|
|
Let's better be safe than sorry.
|
|
Instead of having explicit type-specific callbacks that inform the
triggering unit when a triggered unit changes state, make this generic
so that state changes are forwarded betwee any triggered and triggering
unit.
Also, get rid of UnitRef references from automount, timer, path units,
to the units they trigger and rely exclsuively on UNIT_TRIGGER type
dendencies.
|
|
The information about the unit for which files are being parsed
is passed all the way down. This way messages land in the journal
with proper UNIT=... or USER_UNIT=... attribution.
'systemctl status' and 'journalctl -u' not displaying those messages
has been a source of confusion for users, since the journal entry for
a misspelt setting was often logged quite a bit earlier than the
failure to start a unit.
Based-on-a-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
|
|
|
|
There are very few differences in the implementations of the kill method in the
unit types that have one. Let's unify them.
This does not yet unify unit_kill() with unit_kill_context().
|
|
Take advantage of the fact that almost all callers want to pass unit
description as the last parameter. Those who don't can use the more
flexible manager_status_printf().
|
|
unit_status_printf() checks the state of the manager, not of the unit
as such. Move it to manager.c and rename it to manager_status_printf().
Temporarily keep unit_status_printf as a wrapper macro.
|
|
This introduces a new static list of known attributes and their special
semantics. This means that cgroup attribute values can now be
automatically translated from user to kernel notation for command line
set settings, too.
This also adds proper support for multi-line attributes.
|
|
|
|
|
|
|
|
during runtime
|
|
Adding UNIT= to log lines allows them to be shown
in 'systemctl status' output, etc.
A new set of macros and functions is added. This allows for less
verbose notation than using log_struct() explicitly.
The set of logging functions is expanded to take a pair of arguments
(e.g. "UNIT=" and the RHS) which add an extra line to the structured
log entry. This can be used to add macros which add a different
identifier later on.
|
|
|
|
clock is changed
|
|
|
|
object actually has an exec context
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=54501
|
|
This should address TODO item "new dependency type to "group" services
in a target". Semantic of new dependency is as follows. Once configured
it creates dependency which will cause that all dependent units get
stopped if unit they all depend on is stopped or restarted. Usual use
case would be configuring PartOf=some.target in template unit file
and WantedBy=some.target in [Install] section and enabling desired
number of instances. In this case starting one instance won't pull in
target but stopping or starting target(in case of WantedBy is properly
configured) will cause stop/start of all instances.
|
|
|
|
It made no sense, and since we are documenting the bus calls now and
want to include them in our stability promise we really should get it
cleaned up sooner, not later.
|
|
#pragma once has been "un-deprecated" in gcc since 3.3, and is widely supported
in other compilers.
I've been using and maintaining (rebasing) this patch for a while now, as
it annoyed me to see #ifndef fooblahfoo, etc all over the place,
almost arrogant about the annoyance of having to define all these names to
perform a commen but neccicary functionality, when a completely superior
alternative exists.
I havn't sent it till now, cause its kindof a style change, and it is bad
voodoo to mess with style that has been established by more established
editors. So feel free to lambast me as a crazy bafoon.
v2 - preserve externally used headers
|
|
|
|
running in user mode
|
|
|
|
<koen> | ./src/shared/unit-name.h:29:23: error: redefinition of typedef 'UnitType'
<koen> | ./src/core/unit.h:30:23: note: previous declaration of 'UnitType' was here
|
|
all other dependencies are in 3rd person. Change BindTo= accordingly to
BindsTo=.
Of course, the dependency is widely used, hence we parse the old name
too for compatibility.
|
|
This makes it possible to use them from systemctl without linking
against the core.
|
|
|
|
to unit-name.h
|
|
This makes it possible to use them from systemctl without linking
against the core. A string->enum lookup table is added.
|
|
UnitPath= is also writable via native units and may be used by generators
to clarify from which file a unit is generated. This patch also hooks up
the cryptsetup and fstab generators to set UnitPath= accordingly.
|
|
This should help making the boot process a bit easier to explore and
understand for the administrator. The simple idea is that "systemctl
status" now shows a link to documentation alongside the other status and
decriptionary information of a service.
This patch adds the necessary fields to all our shipped units if we have
proper documentation for them.
|
|
Instead of generic "Starting..." and "Started" messages for all unit use
type-dependent messages. For example, mounts will announce "Mounting..."
and "Mounted".
Add status messages to units of types that used to be entirely silent
(automounts, sockets, targets, devices). For unit types whose jobs are
instantaneous, report only the job completion, not the starting event.
Socket units with non-instantaneous jobs are rare (Exec*= is not used
often in socket units), so I chose not to print the starting messages
for them either.
This will hopefully give people better understanding of the boot.
|
|
RequiresMountsFor= is a shortcut for adding requires and after
dependencies to all mount units neeed for the specified paths.
This solves a couple of issues regarding dep loop cycles for encrypted
swap.
|
