| Age | Commit message (Collapse) | Author |
|---|
|
|
|
In some cases we do not have a udev device when setting up a unit
(certainly the code gracefully handles this). However, we do
then go on to compare the path via path_equal which will assert
if a null value is passed in.
See https://bugs.mageia.org/show_bug.cgi?id=17766
Not sure if this is the correct fix, but it avoids the crash
|
|
core/mount: Don't unmount initramfs mounts
|
|
fstab-generator: fix automounts to not mount automatically
|
|
at boot
Without this patch applied the mount unit with 'automount' option was still
pulled by local-fs.target and thus was activated during the boot process which
defeats the purpose of the 'automount' option:
$ grep /mnt /etc/fstab
/dev/vdb1 /mnt ext2 defaults,x-systemd.automount 0 0
$ reboot
...
$ mount | grep mnt
systemd-1 on /mnt type autofs (rw,relatime,fd=34,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
/dev/vdb1 on /mnt type ext2 (rw,relatime)
$ systemctl status mnt.mount | grep Active
Active: active (mounted) since Thu 2016-03-03 21:36:22 CET; 42s ago
With the patch applied:
$ reboot
...
$ mount | grep mnt
systemd-1 on /mnt type autofs (rw,relatime,fd=22,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
$ systemctl status mnt.mount | grep Active
Active: inactive (dead)
$ ls /mnt
lost+found
$ systemctl status mnt.mount | grep Active
Active: active (mounted) since Thu 2016-03-03 21:47:32 CET; 4s ago
|
|
A mount within /run/initramfs is indicative that the mount was
created by initramfs init and will be unmounted by initramfs
shutdown.
It is unlikely that such a mount point would even be unmountable
by the the main system, for example in the case of the root file-
system being loop-mounted from a file in a /run/initramfs mount.
|
|
Up until now, the failure action has launched reboot.target and
poweroff.target with a less aggressive job mode than
"systemctl reboot" does. This has meant that the reboot and power-
off operations can stall if there are any conflicts with the target
during rebooting.
|
|
https://github.com/systemd/systemd/pull/2508#issuecomment-190901170
Maybe fixes https://bugzilla.redhat.com/show_bug.cgi?id=1308771.
|
|
core: use DUAL_TIMESTAMP_NULL to reset kernel_timestamp
|
|
instead of direct reset of kernel_timestamp fields.
|
|
Trivial fixes
|
|
|
|
Add path argument to clock_is_localtime() and default to "/etc/adjtime" if it's
NULL. This makes the function testable.
Add test-clock: initial test cases for some scenarios, using a temporary file.
This also checks the behaviour with a NULL (i. e. the system's /etc/adjtime)
file.
|
|
tree-wide: merge pager_open_if_enabled() to the pager_open()
|
|
Many subsystems define own pager_open_if_enabled() function which
checks '--no-pager' command line argument and open pager depends
on its value. All implementations of pager_open_if_enabled() are
the same. Let's merger this function with pager_open() from the
shared/pager.c and remove pager_open_if_enabled() from all subsytems
to prevent code duplication.
|
|
|
|
Throughout the tree there's spurious use of spaces separating ++ and --
operators from their respective operands. Make ++ and -- operator
consistent with the majority of existing uses; discard the spaces.
|
|
Fixes: #1969
|
|
This reverts commit cb48dfca6a8bc15d9081651001a16bf51e03838a.
Exec*-settings resolve specifiers twice:
%%U -> config_parse_exec [cb48dfca6a8] -> %U -> service_spawn -> 0
Fixes #2637
|
|
Networkd, resolved, build-sys fixes
|
|
Fixes: #2632
|
|
If we are not PID 1 and started as init, we executing systemctl
with execv(). Here no need to set errno manually, because in a
failure case, because the execv() anyway will set errno depends
on a error.
|
|
We call dual_timestamp_serialize() only if the s->watchdog_timestamp is
set. But the dual_timestamp_serialize() already checks a given dual
timestamp by the call of the dual_timestamp_is_set(). So we can remove
this check safely.
|
|
Some spring cleaning
|
|
The setting is hardly useful (since its effect is generally reduced to zero due
to file system caps), and with the advent of ambient caps an actually useful
replacement exists, hence let's get rid of this.
I am pretty sure this was unused and our man page already recommended against
its use, hence this should be a safe thing to remove.
|
|
Fixes: #2593
|
|
This feature will not be used anytime soon, so remove a bit of cruft.
The BusPolicy= config directive will stay around as compat noop.
|
|
from e903182e5b0daa941de47a9c08c824106cec7fe0
|
|
Fixes: #1981
|
|
cgroup: remove support for NetClass= directive
|
|
Support for net_cls.class_id through the NetClass= configuration directive
has been added in v227 in preparation for a per-unit packet filter mechanism.
However, it turns out the kernel people have decided to deprecate the net_cls
and net_prio controllers in v2. Tejun provides a comprehensive justification
for this in his commit, which has landed during the merge window for kernel
v4.5:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=bd1060a1d671
As we're aiming for full support for the v2 cgroup hierarchy, we can no
longer support this feature. Userspace tool such as nftables are moving over
to setting rules that are specific to the full cgroup path of a task, which
obsoletes these controllers anyway.
This commit removes support for tweaking details in the net_cls controller,
but keeps the NetClass= directive around for legacy compatibility reasons.
|
|
Corrects an incompatibility introduced with 36c16a7cdd6c33d7980efc2cd6a2211941f302b4.
Fixes: #2537
|
|
Let's make things more obvious by placing the parse_usec() invocation directly in config_parse_service_timeout().
|
|
The kernel sets RLIMIT_CORE to 0 by default. Let's bump this to unlimited by
default (for systemd itself and all processes we fork off), so that the
coredump hooks have an effect if they honour it.
Bumping RLIMIT_CORE of course would have the effect that "core" files will end
up on the system at various places, if no coredump hook is used. To avoid this,
make sure PID1 sets the core pattern to the empty string by default, so that
this logic is disabled.
This change in defaults should be useful for all systems where coredump hooks
are used, as it allows useful usage of RLIMIT_CORE from these hooks again. OTOH
systems that expect that coredumps are placed under the name "core" in the
current directory will break with this change. Given how questionnable this
behaviour is, and given that no common distro makes use of this by default it
shouldn't be too much of a loss. Also, the old behaviour may be restored by
explicitly configuring a "core_pattern" of "core", and setting the default
system RLIMIT_CORE to 0 again via system.conf.
|
|
Remove some old cruft
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
Fix for #2467
|
|
unit, not just services
This moves the StartLimitBurst=, StartLimitInterval=, StartLimitAction=, RebootArgument= from the [Service] section
into the [Unit] section of unit files, and thus support it in all unit types, not just in services.
This way we can enforce the start limit much earlier, in particular before testing the unit conditions, so that
repeated start-up failure due to failed conditions is also considered for the start limit logic.
For compatibility the four options may also be configured in the [Service] section still, but we only document them in
their new section [Unit].
This also renamed the socket unit failure code "service-failed-permanent" into "service-start-limit-hit" to express
more clearly what it is about, after all it's only triggered through the start limit being hit.
Finally, the code in busname_trigger_notify() and socket_trigger_notify() is altered to become more alike.
Fixes: #2467
|
|
|
|
After all, the masked unit file error might be returned when enqueuing a unit that is not masked but requires a masked
unit. In this case it should really be clear which unit is meant here.
|
|
This commit changes the mapping of the BUS_ERROR_UNIT_MASKED error to ESHUTDOWN. This error is used whenever the
transaction engine is asked to operate on a masked unit. ESHUTDOWN is what is used for the similar case when the unit
file enable/disable logic hits a masked unit file, hence is a natural candidate to be used here too.
Background: before this patch both "job type not applicable" and "unit masked" where mapped to EBADR, which
transaction_add_job_and_dependencies() then checked for. It actually wanted to check exclusively for the former error
condition, not the latter but due to the same mapping this failed to work.
This patch semi-undoes an accidental change made in caffa4ef700fdd0eadd6c0b2ef9925611672a1bc, however restores the
error number to ESHUTDOWN instead of the original ENOSYS (for the reasons indicated above).
To make this easier to grok for the future, I added comments to explaining which error conditions are checked for.
Fixes: #2315
|
|
|
|
events correctly
|
|
When we enter the running state we should forget about any control processes, in all cases, and not just when hit a
reload timeout...
|
|
We really shouldn't fail silently, but print a log message about these errors. Also make sure to attach error codes to
all log messages where that makes sense.
(While we are at it, add a couple of (void) casts to functions where we knowingly ignore return values.)
|
|
This makes sure we never run two control processes at the same time, we cannot keep track off.
This introduces a slight change of behaviour but cleans up the definition of ExecStop= and ExecStopPost=. The former is
now invoked only if the service managed to start-up correctly. The latter is called even if start-up failed half-way.
Thus, ExecStopPost= may be used as clean-up step for both successful and failed start-up attempts, but ExecStop='s
purpose is clearly defined as being responsible for shutting down the service and nothing else.
The precise behaviour of this was not documented yet. This commit adds the necessary docs.
Fixes: #1254
|
|
For use in timesyncd we already defined a compile-time "epoch" value, which is based on the mtime of the NEWS file, and
specifies a point in time we know lies in the past at runtime. timesyncd uses this to filter out nonsensical timestamp
file data, and bump the system clock to a time that is after the build time of systemd. This patch adds similar bumping
code to earliest PID 1 initialization, so that the system never continues operation with a clock that is in the 1970ies
or even 1930s.
|
|
mount-setup: introduce mount_points_setup
|
|
The mount_setup_early() can fail and if it will occur, there is
no sense to make selinux setup and etc.
|
|
The mount_setup_early() and mount_setup() contain almost the same
pieces of code which calls mount_one() for a certain mount point
from the mount_table. This patch introduces mount_points_setup()
helper to prevent code duplication.
|
