Age | Commit message (Collapse) | Author |
|
Add a new job mode: replace-irreversibly. Jobs enqueued using this mode
cannot be implicitly canceled by later enqueued conflicting jobs.
They can however still be canceled with an explicit "systemctl cancel"
call.
|
|
It is not really necessary to have a hard requirement dependency on
systemd-journald.socket in almost every unit. The socket gets pulled
into boot via at least two ways:
sockets.target -> systemd-journald.socket
sysinit.target -> systemd-journald.service -> systemd-journald.socket
So just assume something pulled the socket in and drop the automatic
requirement dependencies on it.
"systemctl stop systemd-journald.socket" will now not take the whole
system down with it.
|
|
journald is supposed to work. Failure to connect to its socket implies
losing messages. It should be a very unusual event. Log the failure with
LOG_CRIT.
Just because this unit's stdout/stderr failed to connect to the journal
does not necessarily mean that we shouldn't try to log the failure using
a structured entry, so let's use log_struct_unit.
|
|
The functions are quite similar. Unify them into one.
The source gets shorter, the binary gets slightly smaller.
|
|
Almost every unit logs to the journal. If journald gets a permanent
failure, units would not be able to start (exit code 209/STDOUT).
Add a fallback to /dev/null to avoid making the system entirely
unusable in such a case.
|
|
Only set source for freshly created .mounts coming from
mountinfo file.
|
|
Also split out some fileio functions to fileio.c and provide a SELinux
aware pendant in fileio-label.c
see https://bugzilla.redhat.com/show_bug.cgi?id=881577
|
|
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=883043
|
|
Alias as systemd-user.conf is also provided. This should help
users running systemd in session mode.
https://bugzilla.redhat.com/show_bug.cgi?id=690868
|
|
|
|
Fixes this bug:
alxchk > systemctl --user set-environment A=B
alxchk > systemctl --user show-environment | grep ^A=
A=B
alxchk > systemctl --user daemon-reexec
alxchk > systemctl --user show-environment | grep ^A=
alxchk >
|
|
|
|
|
|
|
|
UnsetEnvironment() bus calls
|
|
|
|
Now, actually check if the environment variable names and values used
are valid, before accepting them. With this in place are at some places
more rigid than POSIX, and less rigid at others. For example, this code
allows lower-case environment variables (which POSIX suggests not to
use), but it will not allow non-UTF8 variable values.
All in all this should be a good middle ground of what to allow and what
not to allow as environment variables.
(This also splits out all environment related calls into env-util.[ch])
|
|
|
|
|
|
==6129== Syscall param socketcall.getsockopt(optlen) points to uninitialised byte(s)
==6129== at 0x312D0F325A: getsockopt (syscall-template.S:81)
==6129== by 0x4615E6: get_audit_data (selinux-access.c:268)
==6129== by 0x461A81: selinux_access_check (selinux-access.c:394)
==6129== by 0x453B23: bus_manager_message_handler (dbus-manager.c:1395)
==6129== by 0x313581D9C4: _dbus_object_tree_dispatch_and_unlock (dbus-object-tree.c:862)
==6129== by 0x313580FC1F: dbus_connection_dispatch (dbus-connection.c:4672)
==6129== by 0x44CD4C: bus_dispatch (dbus.c:528)
==6129== by 0x41292F: manager_loop (manager.c:1573)
==6129== by 0x40CD8E: main (main.c:1735)
==6129== Address 0x7fefff2c0 is on thread 1's stack
|
|
This can be pretty important for the user, and is not trivial
to figure out in all cases.
Also show failing path in error messages.
|
|
The ability to start a new unit with 'systemctl start ...' should not
depend on whether there are other units in the directory. Previously,
an additional 'systemctl daemon-reload' would be necessary to tell
systemd to update the list of unit lookup paths.
|
|
This allows one templated unit to refer to another templated unit
at installation time.
Examples:
> grep WantedBy ~/.config/systemd/user/mpop@.timer
WantedBy=services@%i.target
> srv disable mpop@iit.timer
rm '/home/alxchk/.config/systemd/user/services@iit.target.wants/mpop@iit.timer'
> srv enable mpop@iit.timer
ln -s '/home/alxchk/.config/systemd/user/mpop@.timer' '/home/alxchk/.config/systemd/user/services@iit.target.wants/mpop@iit.timer'
Based-on-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
|
|
When the username was not explicitly specified, both %U and %u would
print the username. Make %U always print UID.
|
|
No functional change. This makes it possible to use them in install.c.
|
|
|
|
This fixes a bug where a job with --ignore-dependencies would wait for
other jobs because it merged into a previously queued job.
|
|
|
|
I don't see why this should be logged at all, so let's delete it.
|
|
|
|
A watchdog notification may be handled after the watchdog timer was stopped
while stopping the service. As a result the timer is restarted and the
service may be restarted as well.
The watchdog timestamp is initially set during startup in
service_enter_start_post() and cleared when the timer is stopped. Therefore
it can be used as an indication if the timer should be reset.
|
|
For services without ExecStop= the state SERVICE_STOP is never entered. as
a result the watchdog timer is not stopped and the service is restarted (if
it is configuered to restart).
Stopping the watchdog timer for SERVICE_STOP_SIGTERM as well fixes this.
|
|
|
|
|
|
|
|
|
|
In the x32 ABI, syscall numbers start at 0x40000000. Mask that bit on
x32 for lookups in the syscall_names array and syscall_filter and ensure
that syscall.h is parsed correctly.
[zj: added SYSCALL_TO_INDEX, INDEX_TO_SYSCALL macros.]
|
|
This allows us to print simple performance data of all parts of the boot now:
- firmware
- boot loader
- kernel
- initrd
- userspace
This only works for bootloaders which support passing TSC data via EFI
variables. As of now that's only gummiboot.
|
|
|
|
|
|
|
|
|
|
|
|
Also adds a pair of bus calls for this to the daemon.
|
|
In commit 246aa6d (core: add bus API and systemctl commands for altering
cgroup parameters during runtime), when rewriting unit_add_one_default_cgroup
to prefered style, the check of strduped b->controller was incorrectly
changed to check the containing structure. Correct it.
|
|
This makes sure that a service is not indefinitely restarted in a tight
loop if it fails before it is able to process its socket.
This corrects the breakage introduced with
8d1b002a2e389e79a2414491523de549783abf73. Shame on me.
|
|
resetting the lists
https://bugzilla.redhat.com/show_bug.cgi?id=756787
|
|
|
|
We no longer allow early-boot init scripts, however in late boot the
syslog socket and local mounts are established anyway, so let's simplify
our dep graph a bit.
If $syslog doesn't resolve to syslog.target anymore there's no reason to
keep syslog.target around anymore. Let's remove it.
Note that many 3rd party service unit files order themselves after
syslog.target. These will be dangling dependencies now, which should be
unproblematic, however.
|