Age | Commit message (Collapse) | Author |
|
|
|
When command path has access label and no SmackProcessLabel= is not
set, default process label will be set. But if the default process
label has no rule for the access label of the command path then smack
access error will be occurred.
So, if the command path has execute label then the child have to set
its label to the same of execute label of command path instead of
default process label.
|
|
- Add smack xattr lookup table
- Unify all of mac_smack_apply_xxx{_fd}() to mac_smack_apply() and
mac_smack_apply_fd().
- Add smack xattr read apis similar with apply apis as
mac_smack_read{_fd}().
|
|
Pretty trivial helper which wraps free() but returns NULL, so we can
simplify this:
free(foobar);
foobar = NULL;
to this:
foobar = mfree(foobar);
|
|
Some places invoked fflush() directly with their own manual error
checking, let's unify all that by using fflush_and_check().
This also unifies the general error paths of fflush()+rename() file
writers.
|
|
It seems that systemd still uses legacy -n option. The option has been
originally designed to avoid write to /etc/mtab during boot when root
FS is not ready or read-only.
This is not necessary for long time, because /etc/mtab is not a real
file (it's symlink) and write to the file is impossible. All utils
should be able to detect the symlink and ignore mtab. This concept is
supported for very long time before systemd.
The userspase mount options are currently maintained by libmount
(mount(8) and mount.nfs) in /run/mount) which is tmpfs initialized
during early boot.
|
|
selinux: fix missing SELinux unit access check
|
|
The expire timeout must be started/stopped if the corresponding mount unit
changes its state, e.g. it is started via local-fs.target or stopped by a
manual umount.
|
|
Return the token immediately instead. Otherwise the token is never returned
to the kernel, because the umount job is a noop and will not trigger a
state change.
|
|
The timer value for automount unit specified with TimeoutIdleSec= is rounded
up to one second if that directive is set to 0.
Fix this by bailing early in automount_enter_runnning() in case no timeout is
requested.
|
|
automount: lower the idle polling frequency a bit
|
|
This should make issues like #609 easier to debug.
|
|
The autofs kernel idle logic requires us to poll the kernel for
idleness. This is of course suboptimal, but cannot be fixed without
kernel change.
Currently the polling frequency is set to 1/10 of the idle timeout. This
is quite high, as seen in #571. Let's lower this to 1/3.
|
|
We do not print all non-OK job completion status messages to the console
in red, because not all of them are plain errors. We do however log the
same messages as LOG_ERR.
Differentiate the log levels by deducing them from the job result in a
way that more or less matches the color of the console message.
|
|
Joins three log_struct() calls into one.
|
|
JOB_RESTART and failed JOB_VERIFY_ACTIVE completions were printed to
console but not to the log.
|
|
It is misleading to see "Started foo." in the log when the unit's
condition was false.
|
|
These units' message format strings are identical to the generic
strings. Since we can always rely on the fallback, these are now
redundant.
|
|
This is similar to "core: always try harder to get unit status
message format string", but for job completion status messages.
It makes generic status messages applicable for printing to the console.
And it rewrites the functions in a more table-based style.
|
|
unit_get_status_message_format() is used only with one of JOB_START,
JOB_STOP, JOB_RELOAD, all of which have fallback message strings
defined, so the function may never return NULL.
|
|
The starting/stopping messages are printed to the console only if the
corresponding format string is defined in the unit's vtable. To avoid
excessive messages on the console, the unit types whose start/stop
jobs are instantaneous had the format strings intentionally undefined.
When logging the same event to the journal, a fallback to generic
Starting/Stopping/Reloading messages is used.
The problem of excessive console messages with instantaneous jobs
is already resolved in a nicer way ("core: fix confusing logging of
instantaneous jobs"), so there's no longer a need to have two ways of
getting the format strings. Let's fold them into one function with
the fallback to generic message strings.
|
|
Return 1 from *_reload() methods to signify "we did something", just
like in *_start(). This causes "Reloading foo..." messages to be logged.
"Reloaded foo." messages are already logged.
|
|
For instantaneous jobs (e.g. starting of targets, sockets, slices, or
Type=simple services) the log shows the job completion
before starting:
systemd[1]: Created slice -.slice.
systemd[1]: Starting -.slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
...
The reason is that the job completes before the ->start() method returns
and only then does unit_start() print the "Starting ..." message.
The same thing happens when stopping units.
Rather than fixing the order of the messages, let's just not emit the
Starting/Stopping message at all when the job completes instantaneously.
The job completion message is sufficient in this case.
|
|
core: include unit in path state transition debug logging.
|
|
|
|
"systemctl daemon-reload" should also update the manager defaults from
/etc/systemd/system.conf.
For details, see:
http://lists.freedesktop.org/archives/systemd-devel/2015-June/033062.html
Amended to use manager_set_defaults() as common function.
|
|
fileio: consolidate write_string_file*()
|
|
|
|
The latest consolidation cleanup of write_string_file() revealed some users
of that helper which should have used write_string_file_no_create() in the
past but didn't. Basically, all existing users that write to files in /sys
and /proc should not expect to write to a file which is not yet existant.
|
|
Merge write_string_file(), write_string_file_no_create() and
write_string_file_atomic() into write_string_file() and provide a flags mask
that allows combinations of atomic writing, newline appending and automatic
file creation. Change all users accordingly.
|
|
Whoopsy, forgot to 'git add' this, sorry.
|
|
Just like we conditionalize loading kdbus.ko, we should conditionalize
mounting kdbusfs. Otherwise, we might run with kdbus if it is builtin,
even though the user didn't want this.
|
|
Avoid late bail-out based on a condition. This makes code hard to read.
Instead, reverse the forwarding-condition.
|
|
On dbus1, we receive systemd1.Agent signals via the private socket, hence
it's trusted. However, on kdbus we receive it on the system bus. We must
make sure it's sent by UID=0, otherwise unprivileged users can fake it.
Furthermore, never forward broadcasts we sent ourself. This might happen
on kdbus, as we forward the message on the same bus we received it on,
thus ending up in an endless loop.
|
|
socket: Set SO_REUSEPORT before bind()
|
|
bind() fails if it is called before setting SO_REUSEPORT and another
process is already binded to the same addess.
A new reuse_port option has been introduced to socket_address_listen()
to set the option as part of socket initialization.
|
|
This partially reverts commit 78d298bbc57e412574ea35e6e66f562d97fd9ebc.
The changed coding-style is kept, but the ENOENT->ENOSYS conversion is
reverted.
kmod was fixed upstream to no longer return ENOSYS. Also see:
https://git.kernel.org/cgit/utils/kernel/kmod/kmod.git/commit/?id=114ec87c85c35a2bd3682f9f891e494127be6fb5
The kmod fix is marked for backport, so no reason to bump the kmod
version we depend on.
|
|
When shutting down, if systemd was started with --log-target=null,
systemd-shutdown was being called with --log-target=console.
|
|
Currently, SELinux unit access check is not performed if a given unit
file has not been registered in a hash table. This is because function
manager_get_unit() only tries to pick up a Unit object from a Unit
hash table. Instead, we use function manager_load_unit() searching
Unit file pathes for the given Unit file.
|
|
This was introduced by commit be7d9ff730cb88d7c6a8 and breaks
StopWhenUnneeded=true in the presence of a Requisite dependency.
|
|
Similar to SmackProcessLabel=, if this configuration is set, systemd
executes processes with given SMACK label. If unit has
SmackProcessLabel=, this config is overwritten.
But, do NOT be confused with SMACK64EXEC of execute file. This default
execute process label(and also label which is set by
SmackProcessLabel=) is set fork-ed process SMACK subject label and
used to access the execute file.
If the execution file has also SMACK64EXEC, finally executed process
has SMACK64EXEC subject.
While if the execution file has no SMACK64EXEC, the executed process
has label of this config(or label which is set by
SmackProcessLabel=). Because if execution file has no SMACK64EXEC then
excuted process inherits label from caller process(in this case, the
caller is systemd).
|
|
Smack is also able to have modification rules of existing rules. In
this case, the rule has additional argument to modify previous
rule. /sys/fs/smackfs/load2 node can only take three arguments:
subject object access. So if modification rules are written to
/sys/fs/smackfs/load2, EINVAL error is happen. Those modification
rules have to be written to /sys/fs/smackfs/change-rule.
To distinguish access with operation of cipso2, split write_rules()
for each operation. And, in write access rules, parse the rule and if
the rule has four argument then write into
/sys/fs/smackfs/change-rule.
https://lwn.net/Articles/532340/
fwrite() or fputs() are fancy functions to write byte stream such like
regular file. But special files on linux such like proc, sysfs are not
stream of bytes. Those special files on linux have to be written with
specific size.
By this reason, in some of many case, fputs() was failed to write
buffer to smack load2 node.
The write operation for the smack nodes should be performed with
write().
|
|
This is consistent with how an empty string works in an ExecStart=
statement. We should not differentiate between an empty string and
whitespace only (since they look the same.)
Update the test case with whitespace only to reflect that the list is
reset.
Tested that `test-unit-file` passes and other test cases are not
affected. Installed the patched systemd binaries on a machine, booted
it, looked for out of the usual behavior but did not find any.
|
|
Convert config_parse_exec() from using FOREACH_WORD_QUOTED into a loop
of unquote_first_word.
Loop through the arguments only once (the FOREACH_WORD_QUOTED
implementation did it twice, once to count them and another time to
process and store them.)
Use newly introduced flag UNQUOTE_UNESCAPE_RELAX to preserve
unrecognized escape sequences such as regexps matches such as "\w",
"\d", etc. (Valid escape sequences such as "\s" or "\b" still need an
extra backslash if literals are desired for regexps.)
Differences in behavior:
- Handle ; (command separator) in special, so that only ; on its own is
valid for that purpose, an quoted semicolon ";" or ';' will now behave
as a literal semicolon. This is probably what was initially intended.
- Handle \; (to introduce a literal semicolon) in special, so that only \;
is turned into a semicolon but not \\; or "\\;" or "\;" which are kept
as a literal \; in the output. This is probably what was initially
intended.
Known issues:
- Using an empty string (for example, ExecStartPre=<empty>) will empty
the list and remove the existing commands, but using whitespace only
(for example, ExecStartPre=<spaces>) will not. This is a pre-existing
issue and will be dealt with in a follow up commit.
Tested:
- Unit tests passing. Also `make distcheck` still works as expected.
- Installed it on a local machine and booted with it, checked console
output, systemctl and journalctl output, did not notice any issues
running the patched systemd binaries.
Relevant bug: https://bugs.freedesktop.org/show_bug.cgi?id=90794
|
|
./configure --enable/disable-kdbus can be used to set the default
behavior regarding kdbus.
If no kdbus kernel support is available, dbus-dameon will be used.
With --enable-kdbus, the kernel command line option "kdbus=0" can
be used to disable kdbus.
With --disable-kdbus, the kernel command line option "kdbus=1" is
required to enable kdbus support.
|
|
Commit 72c0a2c25 ("everywhere: port everything to sigprocmask_many()
and friends") reworked code tree-wide to use the new sigprocmask_many()
helper. In this, it caused a regression in pam_setup, because it
dropped a line to initialize the 'ss' signal mask which is later used
in sigwait().
While at it, move the variable declaration to an inner scope.
|
|
This ports a lot of manual code over to sigprocmask_many() and friends.
Also, we now consistly check for sigprocmask() failures with
assert_se(), since the call cannot realistically fail unless there's a
programming error.
Also encloses a few sd_event_add_signal() calls with (void) when we
ignore the return values for it knowingly.
|
|
Rename sd_rtnl to sd_netlink to prepare for further netlink-protocol support. Anything rtnl specific still uses the sd_rtnl prefix, but the generic parts (including the bus and message objects) are now called sd_netlink.
|
|
|
|
ima-setup: write policy one line at a time
|