| Age | Commit message (Collapse) | Author |
|---|
|
|
|
sd_notify() should work for daemons that chroot() as part of their
initilization, hence it's a good idea to use an abstract namespace
socket which is not affected by chroot.
|
|
|
|
|
|
Having information from /proc/self/mountinfo is sufficient to consider a
mount unit loaded.
When there's no mountinfo, the loading of the fragment for the mount
unit is not optional. No extra dependency links must be added when the
loading fails.
https://bugzilla.redhat.com/show_bug.cgi?id=835848
|
|
|
|
|
|
|
|
This adds a timeout if the TTY cannot be acquired and makes sure we
always output the question to the console, never to the TTY of the
respective service.
|
|
With misconfigured mysql, which uses Restart=always, the following two
messages would loop indefinitely and the "systemctl start" would never
finish:
Job pending for unit, delaying automatic restart.
mysqld.service holdoff time over, scheduling restart.
In service_enter_dead() always set the state to SERVICE_FAILED/DEAD first
before setting SERVICE_AUTO_RESTART. This is to allow running jobs to
complete. OnFailure will be also triggered at this point, so there's no
need to do it again from service_stop() (where it was added in commit
f0c7b229).
Note that OnFailure units should better trigger only after giving up
auto-restarting, but that's for another patch to solve.
https://bugzilla.redhat.com/show_bug.cgi?id=832039
|
|
The last argument to service_enter_dead() is bool allow_restart, not
a service result.
|
|
Clients should always watch /dev/watchdog directly, instead of going
indirect. Let's keep our stacks small.
|
|
|
|
The rule is that units that encapsulate our own code are prefixed with
"systemd-". Since the fsck units invoke our own code, hence add the
missing prefix. Since a long long time the fsck units didn't invoke the
naked fsck binaries anymore, and it is unlikely that this well ever
change. On the opposite: the code in systemd-fsck will probably get more
complex over time to handle fsck progress to plymouth forwarding.
Same for quotacheck (but not quotaon!)
|
|
Names= is a source of errors, simply because alias names specified like
this only become relevant after a unit has been loaded but cannot be
used to load a unit.
Let's get rid of the confusion and drop this field. To establish alias
names peope should use symlinks, which have the the benefit of being
useful as key to load a unit, even though they are not taken into
account if unit names are listed but they haven't been explicitly
referenced before.
|
|
People should use systemd.pc if anything at all to determine these
directories, and people should not assume that the bus fields are part
of the supported API, so let's just drop this.
|
|
This option never made much sense. It was originally intended to make
sure that the usual startup output of sysv scripts goes to the terminal.
However, since SysV scripts started from a terminal would not output to
that terminal, but rather /dev/console this effect was more often than
not actually taking place. Nowadays systemd has much nicer boot time
status output than SysV which makes the sysv output redundant. Finally,
all output of services goes to the journal anyway, and is not lost.
Hence, let's drop this option, and simplify things a bit.
|
|
unit names
This makes sure that
systemctl status /home
is implicitly translated to:
systemctl status /home.mount
Similar, /dev/foobar becomes dev-foobar.device.
Also, all characters that cannot be part of a unit name are implicitly
escaped.
|
|
This generalizes a bit of the functionality already available in dracut.
|
|
|
|
As described in
https://bugs.freedesktop.org/show_bug.cgi?id=50184
the journal currently doesn't set fields such as _SYSTEMD_UNIT
properly for messages coming from processes that have already
terminated. This means among other things that "systemctl status" may
not show some of the output of services that wrote messages just
before they exited.
This patch fixes this by having processes that log to the journal
write their unit identifier to journald when the connection to
/run/systemd/journal/stdout is opened. Journald stores the unit ID
and uses it to fill in _SYSTEMD_UNIT when it cannot be obtained
normally (i.e. from the cgroup). To prevent impersonating another
unit, this information is only used when the caller is root.
This doesn't fix the general problem of getting metadata about
messages from terminated processes (which requires some kernel
support), but it allows "systemctl status" and similar queries to do
the Right Thing for units that log via stdout/stderr.
|
|
Let's try to standardize a bit the RPM macros used for
installing/uninstalling services.
This only covers the non-SysV compat bits, since that tends to vary
widely between the various distros.
Usage:
Add %{?systemd_requires} to the header of the spec file. And then:
%post
%systemd_post foobar.service
%preun
%systemd_preun foobar.service
%postun
%systemd_postun foobar.service
And, instead of the latter, in case the service shall be restarted on updates:
%postun
%systemd_postun_restart foobar.service
|
|
Command systemctl stop foo.service, will print error message, when
foo.service is unknown to systemd, i.e. there is no unit file loaded for
this service.
https://bugzilla.redhat.com/show_bug.cgi?id=732874
|
|
Add possibility to specify timeout for oneshot services.
[ https://bugzilla.redhat.com/show_bug.cgi?id=761656
Added minor fixups. -- michich ]
|
|
Use the same function in core and in systemctl.
get_unit_path() in systemctl becomes unnecessary.
|
|
|
|
|
|
|
|
console forwarding
|
|
context
|
|
|
|
|
|
This reverts commits d72238fcb34abc81aca97c5fb15888708ee937d3 and
f3accc08.
OLPC runs / as a bind-mount, so this must be remounted RO during
shutdown to avoid corruption.
As Lennert can't recall the exact reasons for making the shutdown
code skip bind mounts, revert to previous behaviour to solve the
issue for OLPC.
http://lists.freedesktop.org/archives/systemd-devel/2012-April/004957.html
|
|
NotifySocket= is hardly useful, people should use $NOTIFY_SOCKET if
anything.
RunningAs= suggests people had a choice of running user mode as PID 1 or
vice versa, so remove this too.
|
|
This moves FsckPassNo= and SysVStartPriority= into its own
"Compatibility Options" section in the man page to clarify that these
options are not useful for anything but establishing a limited amount of
compatibility.
Also stop exposing these options on the bus.
|
|
usermode helpers
This hooks things up with /proc/sys/kernel/usermodehelper/bset and
/proc/sys/kernel/usermodehelper/inheritable.
|
|
|
|
This also ensures that caps dropped from the bounding set are also
dropped from the inheritable set, to be extra-secure. Usually that should
change very little though as the inheritable set is empty for all our uses
anyway.
|
|
We want to avoid a deadlock when a service has ExecStartPre= programs
that wait for the job queue to run empty because of Type=idle, but which
themselves keep the queue non-empty because START_PRE was considered
ACTIVATING and hence the job not complete. With this patch we alter the
state translation table so that it is impossible ever to wait for
Type=idle unit, hence removing the deadlock.
|
|
|
|
Previously generated units were always placed at the end of the search
path. With this change there will be three unit dirs instead of one, to
place generated entries at the beginning, in the middle and at the end
of the search path:
beginning: for units that need to override all configuration, regardless
of user or vendor. Example use: system-update-generator uses this to
temporarily redirect default.target.
middle: for units that need to override vendor configuration, but not
vendor configuration. Example use: /etc/fstab should override vendor
supplied configuration (think /tmp), but should not override native user
configuration.
end: does not override anything but is available as well. Possible usage
might be to convert D-Bus bus service files to native units but allowing
vendor supplied native units to win.
|
|
UnitPath= is also writable via native units and may be used by generators
to clarify from which file a unit is generated. This patch also hooks up
the cryptsetup and fstab generators to set UnitPath= accordingly.
|
|
|
|
The idle timeout after all is for cosmetics only, hence avoid any
substantial delays just for it.
|
|
Bit by bit we should remove non-unit parsing from PID 1 and move into
generators, to clean up our code base a bit and clearly separate
parsers.
|
|
|
|
rm_rf_children() has already closed the fd with closedir().
|
|
This also introduces rd.systemd.unit= to specify the unit to boot into
in the initrd.
|
|
The man page and the actual code differed, and this is now corrected
|
|
Do not bypass the SERVICE_DEAD/SERVICE_FAILED state by manually issuing
a start job while an automatic restart is pending.
|
