| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit cb48dfca6a8bc15d9081651001a16bf51e03838a.
Exec*-settings resolve specifiers twice:
%%U -> config_parse_exec [cb48dfca6a8] -> %U -> service_spawn -> 0
Fixes #2637
|
|
Networkd, resolved, build-sys fixes
|
|
Fixes: #2632
|
|
If we are not PID 1 and started as init, we executing systemctl
with execv(). Here no need to set errno manually, because in a
failure case, because the execv() anyway will set errno depends
on a error.
|
|
We call dual_timestamp_serialize() only if the s->watchdog_timestamp is
set. But the dual_timestamp_serialize() already checks a given dual
timestamp by the call of the dual_timestamp_is_set(). So we can remove
this check safely.
|
|
Some spring cleaning
|
|
The setting is hardly useful (since its effect is generally reduced to zero due
to file system caps), and with the advent of ambient caps an actually useful
replacement exists, hence let's get rid of this.
I am pretty sure this was unused and our man page already recommended against
its use, hence this should be a safe thing to remove.
|
|
Fixes: #2593
|
|
This feature will not be used anytime soon, so remove a bit of cruft.
The BusPolicy= config directive will stay around as compat noop.
|
|
from e903182e5b0daa941de47a9c08c824106cec7fe0
|
|
Fixes: #1981
|
|
cgroup: remove support for NetClass= directive
|
|
Support for net_cls.class_id through the NetClass= configuration directive
has been added in v227 in preparation for a per-unit packet filter mechanism.
However, it turns out the kernel people have decided to deprecate the net_cls
and net_prio controllers in v2. Tejun provides a comprehensive justification
for this in his commit, which has landed during the merge window for kernel
v4.5:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=bd1060a1d671
As we're aiming for full support for the v2 cgroup hierarchy, we can no
longer support this feature. Userspace tool such as nftables are moving over
to setting rules that are specific to the full cgroup path of a task, which
obsoletes these controllers anyway.
This commit removes support for tweaking details in the net_cls controller,
but keeps the NetClass= directive around for legacy compatibility reasons.
|
|
Corrects an incompatibility introduced with 36c16a7cdd6c33d7980efc2cd6a2211941f302b4.
Fixes: #2537
|
|
Let's make things more obvious by placing the parse_usec() invocation directly in config_parse_service_timeout().
|
|
The kernel sets RLIMIT_CORE to 0 by default. Let's bump this to unlimited by
default (for systemd itself and all processes we fork off), so that the
coredump hooks have an effect if they honour it.
Bumping RLIMIT_CORE of course would have the effect that "core" files will end
up on the system at various places, if no coredump hook is used. To avoid this,
make sure PID1 sets the core pattern to the empty string by default, so that
this logic is disabled.
This change in defaults should be useful for all systems where coredump hooks
are used, as it allows useful usage of RLIMIT_CORE from these hooks again. OTOH
systems that expect that coredumps are placed under the name "core" in the
current directory will break with this change. Given how questionnable this
behaviour is, and given that no common distro makes use of this by default it
shouldn't be too much of a loss. Also, the old behaviour may be restored by
explicitly configuring a "core_pattern" of "core", and setting the default
system RLIMIT_CORE to 0 again via system.conf.
|
|
Remove some old cruft
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
Fix for #2467
|
|
unit, not just services
This moves the StartLimitBurst=, StartLimitInterval=, StartLimitAction=, RebootArgument= from the [Service] section
into the [Unit] section of unit files, and thus support it in all unit types, not just in services.
This way we can enforce the start limit much earlier, in particular before testing the unit conditions, so that
repeated start-up failure due to failed conditions is also considered for the start limit logic.
For compatibility the four options may also be configured in the [Service] section still, but we only document them in
their new section [Unit].
This also renamed the socket unit failure code "service-failed-permanent" into "service-start-limit-hit" to express
more clearly what it is about, after all it's only triggered through the start limit being hit.
Finally, the code in busname_trigger_notify() and socket_trigger_notify() is altered to become more alike.
Fixes: #2467
|
|
|
|
After all, the masked unit file error might be returned when enqueuing a unit that is not masked but requires a masked
unit. In this case it should really be clear which unit is meant here.
|
|
This commit changes the mapping of the BUS_ERROR_UNIT_MASKED error to ESHUTDOWN. This error is used whenever the
transaction engine is asked to operate on a masked unit. ESHUTDOWN is what is used for the similar case when the unit
file enable/disable logic hits a masked unit file, hence is a natural candidate to be used here too.
Background: before this patch both "job type not applicable" and "unit masked" where mapped to EBADR, which
transaction_add_job_and_dependencies() then checked for. It actually wanted to check exclusively for the former error
condition, not the latter but due to the same mapping this failed to work.
This patch semi-undoes an accidental change made in caffa4ef700fdd0eadd6c0b2ef9925611672a1bc, however restores the
error number to ESHUTDOWN instead of the original ENOSYS (for the reasons indicated above).
To make this easier to grok for the future, I added comments to explaining which error conditions are checked for.
Fixes: #2315
|
|
|
|
events correctly
|
|
When we enter the running state we should forget about any control processes, in all cases, and not just when hit a
reload timeout...
|
|
We really shouldn't fail silently, but print a log message about these errors. Also make sure to attach error codes to
all log messages where that makes sense.
(While we are at it, add a couple of (void) casts to functions where we knowingly ignore return values.)
|
|
This makes sure we never run two control processes at the same time, we cannot keep track off.
This introduces a slight change of behaviour but cleans up the definition of ExecStop= and ExecStopPost=. The former is
now invoked only if the service managed to start-up correctly. The latter is called even if start-up failed half-way.
Thus, ExecStopPost= may be used as clean-up step for both successful and failed start-up attempts, but ExecStop='s
purpose is clearly defined as being responsible for shutting down the service and nothing else.
The precise behaviour of this was not documented yet. This commit adds the necessary docs.
Fixes: #1254
|
|
For use in timesyncd we already defined a compile-time "epoch" value, which is based on the mtime of the NEWS file, and
specifies a point in time we know lies in the past at runtime. timesyncd uses this to filter out nonsensical timestamp
file data, and bump the system clock to a time that is after the build time of systemd. This patch adds similar bumping
code to earliest PID 1 initialization, so that the system never continues operation with a clock that is in the 1970ies
or even 1930s.
|
|
mount-setup: introduce mount_points_setup
|
|
The mount_setup_early() can fail and if it will occur, there is
no sense to make selinux setup and etc.
|
|
The mount_setup_early() and mount_setup() contain almost the same
pieces of code which calls mount_one() for a certain mount point
from the mount_table. This patch introduces mount_points_setup()
helper to prevent code duplication.
|
|
|
|
This clean-ups timeout handling in PID 1. Specifically, instead of storing 0 in internal timeout variables as
indication for a disabled timeout, use USEC_INFINITY which is in-line with how we do this in the rest of our code
(following the logic that 0 means "no", and USEC_INFINITY means "never").
This also replace all usec_t additions with invocations to usec_add(), so that USEC_INFINITY is properly propagated,
and sd-event considers it has indication for turning off the event source.
This also alters the deserialization of the units to restart timeouts from the time they were originally started from.
Before this patch timeouts would be restarted beginning with the time of the deserialization, which could lead to
artificially prolonged timeouts if a daemon reload took place.
Finally, a new RuntimeMaxSec= setting is introduced for service units, that specifies a maximum runtime after which a
specific service is forcibly terminated. This is useful to put time limits on time-intensive processing jobs.
This also simplifies the various xyz_spawn() calls of the various types in that explicit distruction of the timers is
removed, as that is done anyway by the state change handlers, and a state change is always done when the xyz_spawn()
calls fail.
Fixes: #2249
|
|
Make sure we can properly process resource limit properties. Specifically, allow transient configuration of both the
soft and hard limit, the same way from the unit files. Previously, only the the hard rlimits could be configured but
they'd implicitly spill into the soft hard rlimits.
This also updates the client-side code to be able to parse hard/soft resource limit specifications. Since we need to
serialize two properties in bus_append_unit_property_assignment() now, the marshalling of the container around it is
now moved into the function itself. This has the benefit of shortening the calling code.
As a side effect this now beefs up the rlimit parser of "systemctl set-property" to understand time and disk sizes
where that's appropriate.
|
|
Let's simplify things a bit, and make sure we don't lose accuracy.
|
|
Clear up some confusion regarding the USec and Sec suffixes we use. In configuration files we usually use the Sec
suffix, to indicate the implied time unit if none is specified. The respective bus properties however use the USec
property, since they expose 64bit unsigned integers containing time in µs.
Before this patch timer units exposed a bus property AccuracyUSec (which hence is the correct name) but when parsing
transient property data would look for AccuracySec instead (which is incorrect). This patch ensures we look for
AccuracySec correctly, but keeps the code for AccuracyUSec in place for compatibility, but adds a warning to ensure
that apps are updated to use the right property.
|
|
This way we can reuse it for parsing rlimit settings in "systemctl set-property" and related commands.
|
|
This adds a new timestamp field to the Unit struct, storing when the last low-level state change took place, and make
sure this is restored after a daemon reload. This new field is useful to allow restarting of per-state timers exactly
where they originally started.
|
|
|
|
remove duplication
|
|
Fixes:
-bash-4.3# echo 1 >/sys/fs/selinux/enforce
-bash-4.3# runcon -t systemd_test_start_t systemctl start hola
-bash-4.3# sesearch --allow -s systemd_test_reload_t -c service
Found 1 semantic av rules:
allow systemd_test_reload_t systemd_unit_file_t : service reload ;
-bash-4.3# runcon -t systemd_test_reload_t systemctl reload hola
Failed to reload hola.service: Access denied
See system logs and 'systemctl status hola.service' for details.
-bash-4.3# journalctl -b | grep -i user_avc | grep reload
USER_AVC pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
msg='
avc: denied { start } for auid=0 uid=0 gid=0 path="/etc/systemd/system/hola.service" cmdline="systemctl reload hola"
scontext=unconfined_u:unconfined_r:systemd_test_reload_t:s0-s0:c0.c1023
tcontext=system_u:object_r:systemd_unit_file_t:s0
tclass=service
See
https://fedoraproject.org/wiki/Features/SELinuxSystemdAccessControl#Documentation
|
|
Otherwise we might end up generating jobs that fail immediately.
This follows the same logic that restart propagation follows.
|
|
When we determine the current system state we check whether units like emergency.target are running or a job that
results in them being run is queued. However, this is not the case for JOB_TRY_RESTART, since that's a NOP if the unit
has not been running before. Hence, don't bother with checking for that job type.
|
|
unit is not running
This makes sure we follow the same basic logic for try-restart if we have a try-reload.
Fixes #688
|
|
transient service
Otherwise we might end resetting /dev/console all the time when a transient service starts or stops.
Fixes #2377
Fixes #2198
Fixes #2061
|
|
[v1] core: resolve specifier in config_parse_exec()
|
|
rootfs as PID1
|
|
Assign errno-style errors to a variable called "r" when they happen, the same way we do this in most other calls. It's
bad enough that the error handling part of the function deals with two different error variables (pam_code and r) now,
but before this fix it was even three!
|
|
Device fixes
|
