summaryrefslogtreecommitdiff
path: root/src/core
AgeCommit message (Collapse)Author
2013-09-11mount: filesystems mounted in the initrd should not conflict with ↵Tom Gundersen
umount.target in the real root These mounts should be kept around and unmounted in the shutdown ramfs. Currently, we will still attempt to umount these in the final kill spree, but we should consider avoiding that too. Also, the should_umount function should be generalised and put into util.c or something like that, but we are still discussing precisely how.
2013-09-11mount: move device links handling from generatorTom Gundersen
This makes mount units work like swap units: when the backing device appears the mount unit will be started. v2: the device should want the mount unconditionally, not only for DefaultDependencies=yes
2013-09-11swap: backing device should unconditionally want swap unitTom Gundersen
There is no need to restrict this to only the 'nofail' case. In the '!nofail' case the unit is already wanted by swap.target, so this is not a functional change.
2013-09-10cgroup: setup BlockIODeviceWeight in bus_cgroup_set_propertyGao feng
This patch adds the support for setting up BlockIODeviceWeight in bus_cgroup_set_property. most of the codes are copied from the case that sets up DeviceAllow.
2013-09-10cgroup: compare fs paths with path_equal() rather than streq()Lennart Poettering
2013-09-10cgroup: setup BlockIORead/WriteBandwidth in bus_cgroup_set_propertyGao feng
This patch adds the support for setting up BlockIORead/WriteBandwidth in bus_cgroup_set_property.
2013-09-10blkio bandwidth: don't clean up all of entries in blockio_device_bandwidths listGao feng
if we get BlockIOReadBandwidth="", we should only remove the read-bandwidth-entries in blockio_device_bandwidths list.
2013-09-10service: remove pidfile after exit of a serviceLukas Nykryn
2013-09-09run: allow non-absolute paths as commandZbigniew Jędrzejewski-Szmek
2013-09-09systemd-run: properly escape argumentsZbigniew Jędrzejewski-Szmek
Spaces, quotes, and such, were not properly escaped. We should write them like we read them. https://bugs.freedesktop.org/show_bug.cgi?id=67971
2013-08-30main: drop capabilities of userhelpers before oursHarald Hoyer
First drop the capabilities of the userhelpers before dropping our own, otherwise we might not be allowed to drop the capabilities of the userhelpers. Especially, if we want to drop CAP_SYS_MODULE. Credits: Matteo Sasso
2013-08-28Do not realloc strings, which are already in the hashmap as keysHarald Hoyer
This prevents corruption of the hashmap, because we would free() the keys in the hashmap, if the unit is already in there, with the same cgroup path.
2013-08-28Revert "cgroup.c: check return value of unit_realize_cgroup_now()"Harald Hoyer
This reverts commit 1f11a0cdfe397cc404d61ee679fc12f58c0a885b.
2013-08-28cgroup: only check once when mode is UNIT_CHECKGao feng
If the mode is UNIT_CHECK,it means we only want to check if the paramaters are valid. the first round of cycle already did this check, no need to check again.
2013-08-28device cgroup: don't create a new CGroupDeviceAllow when it already in the listGao feng
If a device node is already in the device_allow list of CGroupContext, we should replace it instead of create a new one and append this new one to the end of device_allow list. change from v1: use streq to replace !strcmp
2013-08-28blcokio bandwidth: add missing set of CGroupBlockIODeviceBandwidth's readGao feng
BlockIOReadBandwidth and BlockIOWriteBandwidth both use config_parse_blockio_bandwidth to set up CGroupBlockIODeviceBandwidth, We should set the read value based on the left values in config files.
2013-08-27log to kmsg when "debug" is used on the kernel command lineKay Sievers
2013-08-23"-" prefix for InaccessibleDirectories and ReadOnlyDirectoriesMaciej Wereski
2013-08-23blkio: fix incorrect setting of cpu_sharesGao feng
We should set up blockio_weight not cpu_shares.
2013-08-23cgroup.c: check return value of unit_realize_cgroup_now()Harald Hoyer
do not recurse further, if unit_realize_cgroup_now() failed
2013-08-14selinux-access: move GPL to LGPL licenceKay Sievers
On Wed, Aug 14, 2013 at 10:31 PM, Daniel J Walsh <dwalsh@redhat.com> wrote: > On 08/14/2013 04:17 PM, Kay Sievers wrote: > > > > this patch added GPL code to systemd, which otherwise is all LGPL. We need > > to make sure we can always split out any code to a separate shared library > > ... > > > > Mind if I switch your src/core/selinux-access.[ch] files to LGPL? > I have no problem with it. Should be LGPL anyways.
2013-08-13logind: restore logic to kill user processes when session endsLennart Poettering
2013-08-09service: prohibit Restart= set when Type=oneshotMaciej Wereski
2013-08-09service: always unwatch PIDs before forgetting old onesLennart Poettering
2013-08-08dbus: use _cleanup_free_ instead of freeing ourselfRonny Chevalier
2013-08-06systemd: fix segv in snapshot creationZbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=67848
2013-08-03pkg-config: export systemd{system,user}generatordir and catalogdirZbigniew Jędrzejewski-Szmek
We export the location of a bunch of directories this way, so it makes sense to add those three. Especially catalogdir is something that we want people to add things to. Note on the naming: the first two are tied closely to systemd itself, so I prefixed them with "systemd". The third one is rather more generic, so no prefix. https://bugs.freedesktop.org/show_bug.cgi?id=67635
2013-07-30core: make sure scope attributes survive a reloadLennart Poettering
2013-07-30core: open up SendSIGHUP property for transient unitsLennart Poettering
2013-07-30do not pass-along the environment from the kernel or initrdKay Sievers
2013-07-30core: optionally send SIGHUP in addition to the configured kill signalLennart Poettering
This is useful to fake session ends for processes like shells.
2013-07-26rework systemd's own process environment handling/passingKay Sievers
Stop importing non-sensical kernel-exported variables. All parameters in the kernel command line are exported to the initial environment of PID1, but suppressed if they are recognized by kernel built-in code. The EFI booted kernel will add further kernel-internal things which do not belong into userspace. The passed original environ data of the process is not touched and preserved across re-execution, to allow external reading of /proc/self/environ for process properties like container*=.
2013-07-26core: allow setting RemainAfterExit= for transient servicesLennart Poettering
2013-07-23remove left-over initrd time stamp handlingKay Sievers
2013-07-20core: correct dbus parameter directionZbigniew Jędrzejewski-Szmek
2013-07-19core: update configuration directive list "systemd ↵Lennart Poettering
--dump-configuration-items" shows
2013-07-19core: add %v specifierZbigniew Jędrzejewski-Szmek
2013-07-17systemd,systemctl: export condition status and show failing conditionZbigniew Jędrzejewski-Szmek
$ systemctl --user status hoohoo hoohoo.service Loaded: loaded (/home/zbyszek/.config/systemd/user/hoohoo.service; static) Active: inactive (dead) start condition failed at Tue 2013-06-25 18:08:42 EDT; 1s ago ConditionPathExists=/tmp/hoo was not met Full information is exported over D-Bus: [(condition, trigger, negate, param, state),...] where state is one of "failed" (<0), "untested" (0), "OK" (>0). I've decided to use 0 for "untested", because it might be useful to differentiate different types of failure later on, without breaking compatibility. systemctl shows the failing condition, if there was a non-trigger failing condition, or says "none of the trigger conditions were met", because there're often many trigger conditions, and they must all fail for the condition to fail, so printing them all would consume a lot of space, and bring unnecessary attention to something that is quite low-level.
2013-07-17systemd: log failed conditionsZbigniew Jędrzejewski-Szmek
ConditionPathExists=/tmp/nosuchpath failed for nosuchpath.service.
2013-07-18mount: also exclude /usr from unmount at shutdownLennart Poettering
2013-07-18service: don't enter a second SIGTERM/SIGKILL cycle if no ExecStopPost= ↵Michael Olbrich
process is defined It won't help if the main process is still there and there is no new process to kill.
2013-07-17remove RD_TIMESTAMP importHarald Hoyer
If you want timing information from the initramfs, use systemd in the initramfs.
2013-07-17remove /run/initramfs/root-fsck logicHarald Hoyer
dracut uses systemd in the initramfs and does not write these files anymore. The state of the root fsck is serialized.
2013-07-16rpm: add RPM macro for creating tmpfiles entries after package installationLennart Poettering
2013-07-16Do not set LANG=C in every child environment.Harald Hoyer
LANG does not have to be set and setting it to default to the default does not add any value.
2013-07-15build-sys: discover the path to kexec during build timeZbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=55248
2013-07-15man: add FILES section to systemd-journald.service(8)Zbigniew Jędrzejewski-Szmek
2013-07-15systemd: do not output status messages once gettys are runningZbigniew Jędrzejewski-Szmek
Make Type=idle communication bidirectional: when bootup is finished, the manager, as before, signals idling Type=idle jobs to continue. However, if the boot takes too long, idling jobs signal the manager that they have had enough, wait a tiny bit more, and continue, taking ownership of the console. The manager, when signalled that Type=idle jobs are done, makes a note and will not write to the console anymore. This is a cosmetic issue, but quite noticable, so let's just fix it. Based on Harald Hoyer's patch. https://bugs.freedesktop.org/show_bug.cgi?id=54247 http://unix.stackexchange.com/questions/51805/systemd-messages-after-starting-login/
2013-07-12unit: check correct variable after strdupLukas Nykryn
2013-07-11core: simplify drop-in writing logic a bitLennart Poettering
let's make use of some format string magic!
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-07-27 01:58:17 +0000