Age | Commit message (Collapse) | Author |
|
We need to be able to show the properties even of inactive units.
systemctl loads the unit before getting its properties, but this is racy
as the garbage collector may kick in right after the loading.
Fix it by always loading the unit before handling a message for it.
https://bugzilla.redhat.com/show_bug.cgi?id=814966#c6
|
|
|
|
|
|
|
|
|
|
|
|
Instead of generic "Starting..." and "Started" messages for all unit use
type-dependent messages. For example, mounts will announce "Mounting..."
and "Mounted".
Add status messages to units of types that used to be entirely silent
(automounts, sockets, targets, devices). For unit types whose jobs are
instantaneous, report only the job completion, not the starting event.
Socket units with non-instantaneous jobs are rare (Exec*= is not used
often in socket units), so I chose not to print the starting messages
for them either.
This will hopefully give people better understanding of the boot.
|
|
The alignment of the "[ OK ]" and "[FAILED]" status marks to the right
side of the terminal makes it difficult to link them with the messages
on the left if your console is wide.
I considered the options:
1. Align them to the 80th column regardless of the console width.
Disadvantage - either:
- truncating messages needlessly, not using available space; or
- If the message is long, write the mark over it. => ugly
2. Write them to the 80th column for short messages,
and further to the right for longer ones.
Disadvantage:
- jagged look
3. Write the marks on the left, before the message.
Disadvantage:
- Breaks tradition from RHL.
Advantages:
+ slightly simpler code
+ Will annoy holy-traditionalists.
I chose option 3.
BTW, Debian now uses similar marks on the left with its makefile-style
boot.
Special values of the "status" argument to status_vprintf are:
NULL - no status mark, no message indentation
"" - no status mark, message indented as if the mark was there
|
|
The red "[ABORT]" for a dependency failure is too scary.
It suggests a crash. And it suggests a problem with the unit itself.
Change it to a yellow "[DEPEND]" message. The color communicates the
level of seriousness better.
|
|
|
|
The pointer to the end of the string was not advanced after adding
the "cgroups-missing" taint. If "local-hwclock" was detected too,
it would overwrite the previous string.
With 'e' always pointing to the end of the string, removing the last
delimiter is easier.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This breaks D-Bus interface slightly, but since the D-Bus API isn't
covered by the interface stability promise this should be OK.
|
|
The kernel will only notify us of cgroups running empty if no subcgroups
exist anymore. Hence make sure we don't leave our own control/ subcgroup
around longer than necessary.
https://bugzilla.redhat.com/show_bug.cgi?id=818381
|
|
|
|
|
|
|
|
RequiresMountsFor= is a shortcut for adding requires and after
dependencies to all mount units neeed for the specified paths.
This solves a couple of issues regarding dep loop cycles for encrypted
swap.
|
|
Two of our current job types are special:
JOB_TRY_RESTART, JOB_RELOAD_OR_START.
They differ from other job types by being sensitive to the unit active state.
They perform some action when the unit is active and some other action
otherwise. This raises a question: when exactly should the unit state be
checked to make the decision?
Currently the unit state is checked when the job becomes runnable. It's more
sensible to check the state immediately when the job is added by the user.
When the user types "systemctl try-restart foo.service", he really intends
to restart the service if it's running right now. If it isn't running right
now, the restart is pointless.
Consider the example (from Bugzilla[1]):
sleep.service takes some time to start.
hello.service has After=sleep.service.
Both services get started. Two jobs will appear:
hello.service/start waiting
sleep.service/start running
Then someone runs "systemctl try-restart hello.service".
Currently the try-restart operation will block and wait for
sleep.service/start to complete.
The correct result is to complete the try-restart operation immediately
with success, because hello.service is not running. The two original
jobs must not be disturbed by this.
To fix this we introduce two new concepts:
- a new job type: JOB_NOP
A JOB_NOP job does not do anything to the unit. It does not pull in any
dependencies. It is always immediately runnable. When installed to a unit,
it sits in a special slot (u->nop_job) where it never conflicts with
the installed job (u->job) of a different type. It never merges with jobs
of other types, but it can merge into an already installed JOB_NOP job.
- "collapsing" of job types
When a job of one of the two special types is added, the state of the unit
is checked immediately and the job type changes:
JOB_TRY_RESTART -> JOB_RESTART or JOB_NOP
JOB_RELOAD_OR_START -> JOB_RELOAD or JOB_START
Should a job type JOB_RELOAD_OR_START appear later during job merging, it
collapses immediately afterwards.
Collapsing actually makes some things simpler, because there are now fewer
job types that are allowed in the transaction.
[1] Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=753586
|
|
shutdowns clean
|
|
This has the advantage of removing a confusing warning by mount if the
root directory is not listed in fstab.
|
|
Type=idle is much like Type=simple, however between the fork() and the
exec() in the child we wait until PID 1 informs us that no jobs are
left.
This is mostly a cosmetic fix to make gettys appear only after all boot
output is finished and complete.
Note that this does not impact the normal job logic as we do not delay
the completion of any jobs. We just delay the invocation of the actual
binary, and only for services that otherwise would be of Type=simple.
|
|
The ability to set MountAuto=no and SwapAuto=no was useful during the
adoption phase of systemd, so that distributions could stick to their
classic mount scripts a bit longer. It is about time to get rid of it
now.
|
|
Recursive cancellation of jobs would trigger OnFailure actions of
dependent jobs. This is not desirable when isolating.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=798328
|
|
Jobs were not preserved correctly over a daemon-reload operation.
A systemctl process waiting for a job completion received a job removal
signal. The job itself changed its id. The job timeout started ticking all
over again.
This fixes the deficiencies.
|
|
Recursion is unnecessary, because we're deleting all transaction jobs
anyway. And the recursive deletion produces debug messages that are
pointless in transaction abort.
|
|
A transaction can be acyclic, but when it's added to installed jobs,
a cycle may result.
transaction_verify_order_one() attempts to detect these cases, but it
fails because the installed jobs often have the exact generation number
that makes them look as if they were walked already.
Fix it by resetting the generation numbers of all installed jobs before
detecting cycles.
An alternative fix could be to add the generation counter to the
Manager and use it instead of starting always from 1 in
transaction_activate(). But I prefer not having to worry about it
wrapping around.
|
|
The functions looked complicated with the nested loops with breaks,
continues, and "while (again)".
Here using goto actually makes them easier to understand.
Also correcting the comment about redundant jobs.
|
|
|
|
complain
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/sys/class/tty/console/active is misleading
|
|
|
|
|
|
While having a Requires= dependency between units, the dependency is started
automatically on "systemctl start", but it's not started on "systemctl
restart".
JOB_RESTART jobs did not pull the dependencies for starting into the
transaction.
https://bugzilla.redhat.com/show_bug.cgi?id=802770
Note that the other bug noted in comment #2 has been fixed already by avoiding
the deletion of anchor jobs.
|
|
Merging of jobs can result in more than one client being interested in a job.
|
|
Transactions cannot contain installed jobs anymore. Remove the now pointless
checks.
|
|
Previously transactions could reference installed jobs. It made some issues
difficult to fix.
This sets new rules for jobs:
A job cannot be both a member of a transaction and installed. When jobs are
created, they are linked to a transaction. The whole transaction is constructed
(with merging of jobs within, etc.). When it's complete, all the jobs are
unlinked from it one by one and let to install themselves. It is during the
installation when merging with previously installed jobs (from older
transactions) is contemplated.
Merging with installed jobs has different rules than merging within a
transaction:
- An installed conflicting job gets cancelled. It cannot be simply deleted,
because someone might be waiting for its completion on DBus.
- An installed, but still waiting, job can be safely merged into.
- An installed and running job can be tricky. For some job types it is safe to
just merge. For the other types we merge anyway, but put the job back into
JOB_WAITING to allow it to run again. This may be suboptimal, but it is not
currently possible to have more than one installed job for a unit.
Note this also fixes a bug where the anchor job could be deleted during merging
within the transaction.
|
|
Let the jobs install themselves.
|