| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This improves kernel command line parsing in a number of ways:
a) An kernel option "foo_bar=xyz" is now considered equivalent to
"foo-bar-xyz", i.e. when comparing kernel command line option names "-" and
"_" are now considered equivalent (this only applies to the option names
though, not the option values!). Most of our kernel options used "-" as word
separator in kernel command line options so far, but some used "_". With
this change, which was a source of confusion for users (well, at least of
one user: myself, I just couldn't remember that it's systemd.debug-shell,
not systemd.debug_shell). Considering both as equivalent is inspired how
modern kernel module loading normalizes all kernel module names to use
underscores now too.
b) All options previously using a dash for separating words in kernel command
line options now use an underscore instead, in all documentation and in
code. Since a) has been implemented this should not create any compatibility
problems, but normalizes our documentation and our code.
c) All kernel command line options which take booleans (or are boolean-like)
have been reworked so that "foobar" (without argument) is now equivalent to
"foobar=1" (but not "foobar=0"), thus normalizing the handling of our
boolean arguments. Specifically this means systemd.debug-shell and
systemd_debug_shell=1 are now entirely equivalent.
d) All kernel command line options which take an argument, and where no
argument is specified will now result in a log message. e.g. passing just
"systemd.unit" will no result in a complain that it needs an argument. This
is implemented in the proc_cmdline_missing_value() function.
e) There's now a call proc_cmdline_get_bool() similar to proc_cmdline_get_key()
that parses booleans (following the logic explained in c).
f) The proc_cmdline_parse() call's boolean argument has been replaced by a new
flags argument that takes a common set of bits with proc_cmdline_get_key().
g) All kernel command line APIs now begin with the same "proc_cmdline_" prefix.
h) There are now tests for much of this. Yay!
|
|
Let's more verbose error messages when validating the input parameters fails.
Also, call path_is_os_tree() properly, as it doesn't return a boolean, but
possibly also an error. Finally, check for the existance of the new init
process with chase_symlinks() to properly handle possible symlinks on the init
binary (which might actually be pretty likely).
|
|
|
|
containers
|
|
That message is emitted by every systemd instance on every resume:
Dec 06 08:03:38 laptop systemd[1]: Time has been changed
Dec 06 08:03:38 laptop systemd[823]: Time has been changed
Dec 06 08:03:38 laptop systemd[916]: Time has been changed
Dec 07 08:00:32 laptop systemd[1]: Time has been changed
Dec 07 08:00:32 laptop systemd[823]: Time has been changed
Dec 07 08:00:32 laptop systemd[916]: Time has been changed
-- Reboot --
Dec 07 08:02:46 laptop systemd[836]: Time has been changed
Dec 07 08:02:46 laptop systemd[1]: Time has been changed
Dec 07 08:02:46 laptop systemd[926]: Time has been changed
Dec 07 19:48:12 laptop systemd[1]: Time has been changed
Dec 07 19:48:12 laptop systemd[836]: Time has been changed
Dec 07 19:48:12 laptop systemd[926]: Time has been changed
...
Fixes #4896.
|
|
|
|
This means that callers can distiguish an error from flags==0,
and don't have to special-case the empty string.
|
|
(#4515)
Since commit 9d06297, mount units from mountinfo are not bound to their devices
anymore (they use the "Requires" dependency instead).
This has the following drawback: if a media is mounted and the eject button is
pressed then the media is unconditionally ejected leaving some inconsistent
states.
Since udev is the component that is reacting (no matter if the device is used
or not) to the eject button, users expect that udev at least try to unmount the
media properly.
This patch introduces a new property "SYSTEMD_MOUNT_DEVICE_BOUND". When set on
a block device, all units that requires this device will see their "Requires"
dependency upgraded to a "BindTo" one. This is currently only used by cdrom
devices.
This patch also gives the possibility to the user to restore the previous
behavior that is bind a mount unit to a device. This is achieved by passing the
"x-systemd.device-bound" option to mount(8). Please note that currently this is
not working because libmount treats the x-* options has comments therefore
they're not available in utab for later application retrievals.
|
|
socket_find_symlink_target() returns a pointer to
p->address.sockaddr.un.sun_path when the first byte is non-zero without
checking that this is AF_UNIX socket. Since sockaddr is a union this
byte could be non-zero for AF_INET sockets.
Existing callers happen to be safe but is an accident waiting to happen.
Use socket_address_get_path() since it checks for AF_UNIX.
|
|
This adds a concept of "extrinsic" mounts. If mounts are extrinsic we consider
them managed by something else and do not add automatic ordering against
umount.target, local-fs.target, remote-fs.target.
Extrinsic mounts are considered:
- All mounts if we are running in --user mode
- API mounts such as everything below /proc, /sys, /dev, which exist from
earliest boot to latest shutdown.
- All mounts marked as initrd mounts, if we run on the host
- The initrd's private directory /run/initrams that should survive until last
reboot.
This primarily merges a couple of different exclusion lists into a single
concept.
|
|
also ordered against it
Let's tweak the automatic dependency generation of target units: not only add a
Conflicts= towards shutdown.target but also an After= line for it, so that we
can be sure the new target is not started when the old target is still up.
Discovered in the context of #4733
(Also, exclude dependency generation if for shutdown.target itself. — This is
strictly speaking redundant, as unit_add_two_dependencies_by_name() detects
that and becomes a NOP, but let's make this explicit for readability.)
|
|
set up a per-service session kernel keyring, and store the invocation ID in it
|
|
Fixes: #4402
|
|
This adds two new settings BindPaths= and BindReadOnlyPaths=. They allow
defining arbitrary bind mounts specific to particular services. This is
particularly useful for services with RootDirectory= set as this permits making
specific bits of the host directory available to chrooted services.
The two new settings follow the concepts nspawn already possess in --bind= and
--bind-ro=, as well as the .nspawn settings Bind= and BindReadOnly= (and these
latter options should probably be renamed to BindPaths= and BindReadOnlyPaths=
too).
Fixes: #3439
|
|
This is relevant as many of the mounts we try to establish only can be followed
when some other prior mount that is a prefix of it is established. Hence: move
the symlink chasing into the actual mount functions, so that we do it as late
as possibly but as early as necessary.
Fixes: #4588
|
|
After all, these don#t strictly encapsulate bind mounts anymore, and we are
preparing this for adding arbitrary user-defined bind mounts in a later commit,
at which point this would become really confusing. Let's clean this up, rename
the BindMount structure to MountEntry, so that it is clear that it can contain
information about any kind of mount.
|
|
This reworks handling of the read-only management for mount points. This will
become handy as soon as we add arbitrary bind mount support (which comes in a
later commit).
|
|
All other tables got reindented, but one was forgotten. Fix that.
|
|
This makes "systemd-run -p MountFlags=shared -t /bin/sh" work, by making
MountFlags= to the list of properties that may be accessed transiently.
|
|
Let's store the invocation ID in the per-service keyring as a root-owned key,
with strict access rights. This has the advantage over the environment-based ID
passing that it also works from SUID binaries (as they key cannot be overidden
by unprivileged code starting them), in contrast to the secure_getenv() based
mode.
The invocation ID is now passed in three different ways to a service:
- As environment variable $INVOCATION_ID. This is easy to use, but may be
overriden by unprivileged code (which might be a bad or a good thing), which
means it's incompatible with SUID code (see above).
- As extended attribute on the service cgroup. This cannot be overriden by
unprivileged code, and may be queried safely from "outside" of a service.
However, it is incompatible with containers right now, as unprivileged
containers generally cannot set xattrs on cgroupfs.
- As "invocation_id" key in the kernel keyring. This has the benefit that the
key cannot be changed by unprivileged service code, and thus is safe to
access from SUID code (see above). But do note that service code can replace
the session keyring with a fresh one that lacks the key. However in that case
the key will not be owned by root, which is easily detectable. The keyring is
also incompatible with containers right now, as it is not properly namespace
aware (but this is being worked on), and thus most container managers mask
the keyring-related system calls.
Ideally we'd only have one way to pass the invocation ID, but the different
ways all have limitations. The invocation ID hookup in journald is currently
only available on the host but not in containers, due to the mentioned
limitations.
How to verify the new invocation ID in the keyring:
# systemd-run -t /bin/sh
Running as unit: run-rd917366c04f847b480d486017f7239d6.service
Press ^] three times within 1s to disconnect TTY.
# keyctl show
Session Keyring
680208392 --alswrv 0 0 keyring: _ses
250926536 ----s-rv 0 0 \_ user: invocation_id
# keyctl request user invocation_id
250926536
# keyctl read 250926536
16 bytes of data in key:
9c96317c ac64495a a42b9cd7 4f3ff96b
# echo $INVOCATION_ID
9c96317cac64495aa42b9cd74f3ff96b
# ^D
This creates a new transient service runnint a shell. Then verifies the
contents of the keyring, requests the invocation ID key, and reads its payload.
For comparison the invocation ID as passed via the environment variable is also
displayed.
|
|
This patch ensures that each system service gets its own session kernel keyring
automatically, and implicitly. Without this a keyring is allocated for it
on-demand, but is then linked with the user's kernel keyring, which is OK
behaviour for logged in users, but not so much for system services.
With this change each service gets a session keyring that is specific to the
service and ceases to exist when the service is shut down. The session keyring
is not linked up with the user keyring and keys hence only search within the
session boundaries by default.
(This is useful in a later commit to store per-service material in the keyring,
for example the invocation ID)
(With input from David Howells)
|
|
|
|
Catalog message improvements
|
|
Networkd man page update and fixes for the fallout
|
|
This add a new message id for the end of user instance startup.
User manager startup is a different beast then the system startup.
Their descriptions are completely different too. Let's just separate
them.
Partially fixes #3351.
Also remove "successful" from the description, since we don't know if
the startup was successful or not.
|
|
The loop must terminate after at most three iterations anyway.
|
|
Various specifier resolution fixes.
|
|
Generalize image dissection logic of nspawn, and make it useful for other tools.
|
|
Generally non-inverted conditions are nicer, and ternary operators
with complex conditions are a bit hard to read.
No functional change.
|
|
|
|
|
|
%c and %r rely on settings made in the unit files themselves and hence resolve
to different values depending on whether they are used before or after Slice=.
Let's simply deprecate them and drop them from the documentation, as that's not
really possible to fix. Moreover they are actually redundant, as the same
information may always be queried from /proc/self/cgroup and /proc/1/cgroup.
(Accurately speaking, %R is actually not broken like this as it is constant.
However, let's remove all cgroup-related specifiers at once, as it is also
redundant, and doesn't really make much sense alone.)
|
|
Expanding specifiers here definitely makes sense.
Also simplifies the loop a bit, as there's no reason to keep "prev" around...
|
|
This might be useful for some people, for example to pull in mounts for paths
including the machine ID or hostname.
|
|
Let's permit specifier expansion at a numbre of additional fields, where
arbitrary strings might be passed where this might be useful one day. (Or at
least where there's no clear reason where it wouldn't make sense to have.)
|
|
unit_name_printf() before
For settings that are not taking unit names there's no reason to use
unit_name_printf(). Use unit_full_printf() instead, as the names are validated
anyway in one form or another after expansion.
|
|
unit_name_printf() is usually what we use when the resulting string shall
qualify as unit name, and it hence avoids resolving specifiers that almost
certainly won't result in valid unit names.
Add a couple of more specifiers that unit_full_printf() resolves also to the
list unit_name_printf() resolves, as they are likely to be useful in valid unit
names too. (Note that there might be cases where this doesn't hold, but we
should still permit this, as more often than not they are safe, and if people
want to use them that way, they should be able to.)
|
|
This monopolizes unit file specifier expansion in load-fragment.c, and removes
it from socket.c + service.c. This way expansion becomes an operation done exclusively at time of loading unit files.
Previously specifiers were resolved for all settings during loading of unit
files with the exception of ExecStart= and friends which were resolved in
socket.c and service.c. With this change the latter is also moved to the
loading of unit files.
Fixes: #3061
|
|
|
|
|
|
Note that any exit code is available through $EXIT_STATUS and not through
$EXIT_CODE. This mimics siginfo.
|
|
|
|
Follow-up to #4687 and e7330dfe14b1965f.
|
|
Let's remove chase_symlinks_prefix() and instead introduce a flags parameter to
chase_symlinks(), with a flag CHASE_PREFIX_ROOT that exposes the behaviour of
chase_symlinks_prefix().
|
|
Let's use chase_symlinks() everywhere, and stop using GNU
canonicalize_file_name() everywhere. For most cases this should not change
behaviour, however increase exposure of our function to get better tested. Most
importantly in a few cases (most notably nspawn) it can take the correct root
directory into account when chasing symlinks.
|
|
We generally try to make our destructors robust regarding NULL pointers, much
in the same way as glibc's free(). Do this also for unit_free().
Follow-up for #4748.
|
|
Improvements for notify services (including #4212)
|
|
Setting NotifyAccess=exec allows notifications coming directly from any
control process.
|
|
So far systemd-nspawn container has been creating files under
/run/systemd/inaccessible, no matter whether it's running in user
namespace or not. That's fine for regular files, dirs, socks, fifos.
However, it's not for block and character devices, because kernel
doesn't allow them to be created under user namespace. It results
in warnings at booting like that:
====
Couldn't stat device /run/systemd/inaccessible/chr
Couldn't stat device /run/systemd/inaccessible/blk
====
Thus we need to have the cgroups whitelisting handler to silently ignore
a file, when the device path is prefixed with "-". That's exactly the
same convention used in directives like ReadOnlyPaths=. Also insert the
prefix "-" to inaccessible entries.
|
